eb001/tb/sw/src/SlvMain.c

#include <stdint.h>
// #include "uart.h"
// #include "gpio.h"
// #include "timer.h"
#include "tl2cdr.h"


volatile uint32_t *const plic_priority = (uint32_t *)(0xc000000U);

volatile uint32_t *plic_pending_0_31 = (uint32_t*)( 0xc000000U + 0X001000 );
volatile uint32_t *plic_enable_0_31  = (uint32_t*)( 0xc000000U + 0X002000 );

volatile uint32_t *plic_threshold_0  = (uint32_t*)( 0xc000000U + 0X200000 );
volatile uint32_t *plic_claim        = (uint32_t*)( 0xc000000U + 0X200004 );
	 
static inline void error() {
    while(1);
}




extern const uint8_t int_svr_code[];
uint32_t (*sys_call)(uint32_t no, ...);



void main()
{
	int i;

	/*初始化plic*/
	*plic_enable_0_31 =   1 << CDR_INT_TX0END
						| 1 << CDR_INT_TX1END

						| 1 << CDR_INT_RX0ERROR
						| 1 << CDR_INT_RX1ERROR

						| 1 << CDR_INT_RX0START
						| 1 << CDR_INT_RX1START

						| 1 << CDR_INT_RX0END
						| 1 << CDR_INT_RX1END

						//| 1 << CDR_INT_TX0_FIFO_DEQ
						//| 1 << CDR_INT_TX1_FIFO_DEQ

						| 1 << CDR_INT_RX0_FIFO_ENQ
						| 1 << CDR_INT_RX1_FIFO_ENQ
						;

	plic_priority[CDR_INT_TX0END] = 1;
	plic_priority[CDR_INT_TX1END] = 1;
	plic_priority[CDR_INT_RX0ERROR] = 1;
	plic_priority[CDR_INT_RX1ERROR] = 1;
	plic_priority[CDR_INT_RX0START] = 1;
	plic_priority[CDR_INT_RX1START] = 1;
	plic_priority[CDR_INT_RX0END] = 1;
	plic_priority[CDR_INT_RX1END] = 1;
	plic_priority[CDR_INT_TX0_FIFO_DEQ] = 1;
	plic_priority[CDR_INT_TX1_FIFO_DEQ] = 1;
	plic_priority[CDR_INT_RX0_FIFO_ENQ] = 1;
	plic_priority[CDR_INT_RX1_FIFO_ENQ] = 1;
	*plic_threshold_0 = 0;

	sys_call = (void *)int_svr_code;


	//复位脉冲
	*tx0_softReset = 1;
	*tx1_softReset = 1;
	*rx0_softReset = 1;
	*rx1_softReset = 1;


	//tx0   下行
	//tx1	上行
	//rx0	下行
	//rx1	上行


	while (1);



#if 0
	register uint32_t readDat;
	register uint32_t operator;
	register uint32_t downRecvLen;
	register uint32_t upRecvLen;
	register uint32_t crc;

	uint8_t localData[512];
	uint32_t slvNum;
	uint32_t totNum;

	register uint32_t isLast;
	register uint32_t flag;

	*plic_enable_0_31 = 1 << CDR_INT_TXEND | 1 << CDR_INT_RXERROR | 1 << CDR_INT_RXSTART | 1 << CDR_INT_RXEND;
	*plic_priority_TxEnd   = 1;
	*plic_priority_RxError = 1;
	*plic_priority_RxStart = 1;
	*plic_priority_RxEnd   = 1;
	*plic_threshold_0 = 0;


	while(1){
		*cdr_softReset = 1; //复位脉冲
		*cdr_direct = 0;
		isLast = *cdr_IsLast;

									// asm volatile(
									// 	"sw x0, 0x10(x0)\n"  //cdr_softReset 写入任意值进行复位//复位脉冲
									// 	"lw %0, 0x408(x0)\n" //ReadIsLast 获取是否为最后一个从机
									// 	"sw x0, 0xc(x0)\n"   //设置CDR方向
									// 	: "+r"(isLast)
									// );



		// *WriteGpio = 0x01;

		//等待接收开始中断
		while(!flag_intRxStart);
									// asm volatile (	
									// 	"1:\n"
									// 	"andi %0, sp, 0x04\n"
									// 	"beqz %0, 1b\n"
									// 	"andi sp, sp, 0xFB\n"
									// 	: "+r"(flag)
									// );

		readDat = *cdr_rxFifo;
		operator = (readDat >> 16) & 0xf;
		downRecvLen = readDat >> 20;
		readDat = *cdr_rxFifo;

									// asm volatile (
									// 	"lw %0, 0x1c(x0)\n" //read rxfifo
									// 	"srli %1, %0, 16\n" // operator = readDat >> 16
									// 	"srli %2, %1, 4\n"  // downRecvLen = operator >> 4
									// 	"andi %1, %1,0xf\n" // operator =  operator & 0xf
									// 	"lw %0, 0x1c(x0)\n" //read rxfifo

									// 	: "+r"(readDat), "+r"(operator), "+r"(downRecvLen)
									// );


		// *WriteGpio = 0x03;

		if( operator == 0 ){
			



			//接收本地包
			for( uint32_t i = 0; i < 2; i++ ) {
				if( flag_intRxError ){
					while(1);
				}
				*(localData+i) = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error
												// 	"lw %1, 0x1c(x0)\n" //read rxfifo
												// 	: "+r"(flag), "+r"(readDat)
												// );
			}



			// *WriteGpio = 0x07;
			register uint32_t downSendLen;	
			downSendLen = downRecvLen - 8;

			if(!isLast){
				// 下行转发新建包头
				register uint32_t downSendHead;

				*cdr_txLen = downRecvLen;
				downSendHead = (downSendLen << 20) | ( 0 << 16) | 0;
				*cdr_txFifo = downSendHead;
				*cdr_txFifo = 0;

												// asm volatile (
												// 	"sw %0, 0x4(x0)\n"   // *cdr_txLen = downRecvLen
												// 	"addi %2, %0, -8\n"  //downSendLen = downRecvLen - 8;
												// 	"slli %1, %2, 20\n"  // downSendHead =  (downSendLen << 20) |( 0 << 16) | 0;
												// 	"sw %1, 0x8(x0)\n"  //*cdr_txFifo = downSendHead
												// 	"sw x0, 0x8(x0)\n"  //*cdr_txFifo = 0
												// 	: "+r"(downRecvLen), "+r"(downSendHead), "+r"(downSendLen)
												// );

				//下行转发负载	
				for( uint32_t i = 0; i < (downSendLen); i+=4 ){ //一次传4byte
					register uint32_t forData;

					if( flag_intRxError){
						while(1);
					}
					*cdr_txFifo = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error 速度不够，不再检查接收
												// 	"lw %1, 0x01c(x0)\n"
												// 	"sw %1, 0x008(x0)\n"
												// 	: 
												// 	"+r"(flag), "+r"(forData)
												// );		
				}
			} else{ //isLast

				//空转掉剩余负载
				for( uint32_t i = 0; i < (downSendLen >> 2); i++ ){ //一次传4byte
					register uint32_t forData;

					if( flag_intRxError ){
						while(1);
					}
					readDat = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error 速度不够，不再检查接收
												// 	"lw %1, 0x01c(x0)\n"
												// 	: "+r"(flag), "+r"(forData)
												// );		
				}
			}

			// *WriteGpio = 0x0f;
			
			//CRC
			if( flag_intRxError ){
				while(1);
			}
			crc = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error
												// 	"lw %1, 0x1c(x0)\n" //read rxfifo
												// 	: "+r"(flag), "+r"(readDat)
												// );




			// *WriteGpio = 0x1f;

			//等待接收完成标志
			while(!flag_intRxEnd);
			flag_intRxEnd = 0;
												// asm volatile (
												// 	"1:\n"
												// 	"andi %0, sp, 0x08\n"
												// 	"beqz %0, 1b\n"
												// 	"andi sp, sp, 0xF7\n"
												// 	: "+r"(flag)
												// );

			// *WriteGpio = 0x3f;

			if(!isLast){
				//等待发送完成标志
				while(!flag_intTxEnd);
				flag_intTxEnd = 0;
												// asm volatile (
												// 	"1:\n"
												// 	"andi %0, sp, 0x01\n"
												// 	"beqz %0, 1b\n"
												// 	"andi sp, sp, 0xFE\n"
												// 	:"+r"(flag)
												// );
			}

			// *WriteGpio = 0x7f;

			register uint32_t one = 1;
			register uint32_t txLen;
			register uint32_t txHeader;

			*cdr_softReset = 1;
			*cdr_direct = 1;
												// asm volatile(
												// 	"sw x0, 0x10(x0)\n"  //cdr_softReset 写入任意值进行复位//复位脉冲
												// 	"sw %0, 0xc(x0)\n"   //设置CDR方向
												// 	: "+r"(one)
												// );


			if(!isLast){
				//上行转发

				//接收第一个包

				while(!flag_intRxStart);
				flag_intRxStart = 0;
												// asm volatile (
												// 	"1:\n"
												// 	"andi %0, sp, 0x04\n"
												// 	"beqz %0, 1b\n"
												// 	"andi sp, sp, 0xFB\n"
												// 	:"+r"(flag)
												// );
				


				//接收第一个包
				if(flag_intRxError){while(1);}
				readDat = *cdr_rxFifo;
				upRecvLen = readDat >> 20;
				txLen = upRecvLen + 16;
				txHeader = upRecvLen + 8;
				txHeader = (txHeader << 20) | ( 0 << 16) | 0;

				//发送上行包头
				*cdr_txLen = txLen;
				*cdr_txFifo = txHeader;
				*cdr_txFifo = 0;

												// asm volatile (
												// 	"lw %0, 0x1c(x0)\n" //read rxfifo
												// 	"srli %1, %0, 20\n" // upRecvLen = readDat >> 20
												// 	"addi %2, %1, 16\n" //txLen = upRecvLen + 16
												// 	"addi %3, %1,  8\n" //txHeader = upRecvLen + 8
												// 	"slli %3, %3, 20\n" //txHeader = txHeader << 20 |( 0 << 16) | 0
												// 	"sw %2,  0x4(x0)\n" //*cdr_txLen = txLen
												// 	"sw %3,  0x8(x0)\n" //*cdr_txFifo = txHeader
												// 	"sw x0,  0x8(x0)\n" //*cdr_txFifo = 0

												// 	: "+r"(readDat), "+r"(upRecvLen), "+r"( txLen ), "+r"( txHeader )
												// );

	


				for( uint32_t i = 0; i < 8/4; i ++ ){
					*cdr_txFifo = 0;
												// asm volatile (
												// 	"sw x0,  0x8(x0)\n" //*cdr_txFifo = 0;
												// );
				}



				//接收第二个包
				if(flag_intRxError){while(1);}
				readDat = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error //速度不够，不校验
												// 	"lw %1, 0x1c(x0)\n" //read rxfifo
												// 	:"+r"(flag), "+r"(readDat)
												// );



				//上行转发负载
				for( uint32_t i = 0; i < (upRecvLen); i += 4 ){ //一次传4byte
					register uint32_t forData;

					if( flag_intRxError ){
						while(1);
					}
					*cdr_txFifo = *cdr_rxFifo;

												// asm volatile (
												// 	"andi %0, sp, 0x80\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error 速度不够，不再检查接收
												// 	"lw %1, 0x01c(x0)\n"
												// 	"sw %1, 0x008(x0)\n"
												// 	:"+r"(flag), "+r"(forData)
												// );

				}

				//CRC
				if( flag_intRxError ){
					while(1);
				}
				crc = *cdr_rxFifo;
												// asm volatile (
												// 	"andi %0, sp, 0x08\n"
												// 	"1:\n"
												// 	"bnez %0, 1b\n" //error
												// 	"lw %0, 0x1c(x0)\n" //read rxfifo
												// 	:"+r"(flag), "+r"(readDat)
												// );


				//等待接收完成标志
				while(!flag_intRxEnd);
				flag_intRxEnd = 0;
												// asm volatile (
												// 	"1:\n"
												// 	"andi %0, sp, 0x08\n"
												// 	"beqz %0, 1b\n"
												// 	"andi sp, sp, 0xF7\n"
												// 	:"+r"(flag)
												// );

				totNum = slvNum + (upRecvLen >> 3) - 1;
			} else { //islast



				//发送上行包头
				txLen = upRecvLen + 16;
				txHeader = ( 8 << 20 ) | ( 0 << 16) | 0;
				*cdr_txLen = txLen;
				*cdr_txFifo = txHeader;
				*cdr_txFifo = 0;
												// asm volatile (

												// 	"li %0, 16\n" //txLen = upRecvLen + 16
												// 	"sw %0,  0x4(x0)\n" //*cdr_txLen = txLen
												// 	"lui %1, 0x800\n"   //txHeader = 8 << 20 |( 0 << 16) | 0
												// 	"sw %1,  0x8(x0)\n" //*cdr_txFifo = txHeader
												// 	"sw x0,  0x8(x0)\n" //*cdr_txFifo = 0

												// 	: "+r"( txLen ), "+r"( txHeader )
												// );

				for( uint32_t i = 0; i < 8/4; i ++ ){
					*cdr_txFifo = 0;
												// asm volatile (
												// 	"sw x0,  0x8(x0)\n" //*cdr_txFifo = 0;
												// );
				}
			}

			//等待发送完成标志
			while(!flag_intTxEnd);
			flag_intTxEnd = 0;
												// asm volatile (
												// 	"1:\n"
												// 	"andi %0, sp, 0x01\n"
												// 	"beqz %0, 1b\n"
												// 	"andi sp, sp, 0xFE\n"
												// 	:"+r"(flag)
												// );

			slvNum = 64 - ( downRecvLen >> 3 );
			// *WriteGpio = 1 << slvNum;

		} else if ( operator == 1 ){
			// error();
		} else if ( operator == 2 ){
			// error();
		} else {
			// error();
		}		
	}
#endif


}