调整同步的测试用例

tb/shinTest/ShinTopSpiTb.v

@@ -11,6 +11,8 @@
   //`define ENABLE_EXCHG_DATA_SEQ2_TEST
   //`define ENABLE_EXCHG_DATA_BC_TEST
 `define ENABLE_SYNC_TEST
+`define ENABLE_SYNC_SIG0_TEST
+`define ENABLE_SYNC_SIG1_TEST
 
 module ShinTopSpiTb(
 
@@ -950,7 +952,7 @@ initial begin
 ---------------------------------------------------------------------------------------------------------*/
   // 同步
 
-  begin:SYNC_TESTCASE
+  begin:SYNC_TESTCASE0
     _t_start = $time;
     #1000
 
@@ -986,40 +988,16 @@ initial begin
     
     spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器
 
+    _t_end = $time;
+    $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
+  end
+`endif
+
+`ifdef ENABLE_SYNC_SIG0_TEST 
+  begin:SYNC_TESTCASE1
+    _t_start = $time;
+    #1000
     `include "sync_sig_pkt.vh"
-    `DEF_sync_sig_pkt_sm(txBuf);
-    spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
-    spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
-
-    spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));
-    _temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) +
-      (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);
-    /*
-    $fdisplay(spidata_file, "读取时间:%d\n", _temp_time);
-    */
-    _temp_time = _temp_time + 32'h3000;
-    /*
-    $fdisplay(spidata_file, "读取时间:%2h %2h %2h\n", 
-      (_temp_time & 8'hff),
-      ((_temp_time >> 8) & 8'hff),
-      ((_temp_time >> 16) & 8'hff));
-    */
-
-    $fdisplay(spidata_file, "<<发包：");
-    `DEF_sync_sig_pkt(txBuf);
-    
-    txBuf[16 + 3 + 12] = (_temp_time & 8'hff);
-    txBuf[17 + 3 + 12] = (_temp_time >> 8) & 8'hff;
-    txBuf[18 + 3 + 12] = (_temp_time >> 16) & 8'hff;
-
-    spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) ); //写入SM1
-
-    //发布请求
-    txBuf[0+3] = `MST_TX_TRG;
-    spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
-    @(posedge isResp) #5 begin end
-    $fdisplay(spidata_file, ">>回包：");
-    spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
 
     //spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
     spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(1)) );
@@ -1027,8 +1005,8 @@ initial begin
     spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(3)) );
     spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(4)) );
 
-    /*
-    #10000
+  
+  #100000
     //清脉冲
     txBuf[0+3] = 0;  //负载0x122 sync0脉冲宽度
     txBuf[1+3] = 0;  //负载0x123
@@ -1042,11 +1020,14 @@ initial begin
     spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
     spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
     spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
-    */
+
+  #100000
     _t_end = $time;
     $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
   end
+`endif
 
+`ifdef ENABLE_SYNC_SIG1_TEST
   begin:SYNC_TESTCASE2
     _t_start = $time;
     #1000
@@ -1075,7 +1056,7 @@ initial begin
   spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2
   */
 
-  #2000000
+  #1000000
   $display("Testcase Finished! Time Out !!!");
   $fclose(spidata_file);
 	$stop;

tb/shinTest/gen_pkt.py

@@ -432,20 +432,26 @@ if __name__ == '__main__':
     genPkt.clean()
     genPkt.setPktType(0)
 
+    genPkt.addBeforeExc(
+          '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
+        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
+        + '''_temp_time = _temp_time + 32'h2000;\n\n''')
+
     #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    data = bytearray(b"\0" * 100)
+    data = [0,] * 100 #bytearray(b"\0" * 100)
     data[0] = 0xff  #地址0x120
     data[2] = 0xa
     data[4] = 0xa
     data[6] = 0xa
     data[8] = 0xa
     
-    data[16] = 0x00 #地址0x130, sync同步点
-    data[17] = 0x00 #地址0x131
-    #data[18] = 0x10
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
     
-    data[24] = 0x80 #地址0x138, sync周期 4B
-    data[25] = 0x00 #地址0x139
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x10 #地址0x139
     
     data[28] = 0x81 #sync1偏移
     data[29] = 0x0
@@ -456,7 +462,6 @@ if __name__ == '__main__':
     genPkt.addSubPkt(random.randint(0, 2048), 0, 0x120, 0xe, 0x28, data)
 
     gen_file_def = "sync_sig_pkt"
-    '''
     sm_idx = 0
 
     genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
@@ -464,7 +469,6 @@ if __name__ == '__main__':
                        +genTrgTransPktCode(gen_file_def, sm_idx)
                        +genReadAckPktCode(gen_file_def, sm_idx))
 
-    '''
 
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)