aqspi 部分转单线，注意datar_sync和dataw等或许需要增强约束

src/main/scala/backBoard/shin/NSpiInterface.scala

@@ -48,7 +48,9 @@ trait SyncSpiAsync{ this: SyncSpiInterfaceBase =>
   qspi.miso := exRego(7, 4)
   qspi.isDirIn := isSpiWrite | (byteSel <= 3.U)
 
-  when( true.B ){
+  when( byteSel <= 3.U ){ //单线操作
+    bitSel := bitSel + 1.U
+  } .otherwise{ //4线操作
     bitSel := ~bitSel
   }
 
@@ -56,23 +58,32 @@ trait SyncSpiAsync{ this: SyncSpiInterfaceBase =>
     byteSel := byteSel + 1.U
   }
 
-  when( bitSel === 0.U ){
-    exRegi := Cat( 0.U, qspi.mosi )
-  }.otherwise{
-    exRegi := Cat( exRegi(3,0), qspi.mosi )
+
+  when( bitSel <= 3.U ){ //单线操作
+    when( bitSel === 0.U ){
+      exRegi := Cat( 0.U, qspi.mosi.extract(0) )
+    }.otherwise{
+      exRegi := Cat( exRegi(6,0), qspi.mosi.extract(0) )
+    } 
+  } .otherwise{ //4线操作
+    when( bitSel === 0.U ){
+      exRegi := Cat( 0.U, qspi.mosi )
+    }.otherwise{
+      exRegi := Cat( exRegi(3,0), qspi.mosi )
+    }    
   }
 
-  when( bitSel.andR ){
-    when((byteSel === 1.U || byteSel === 2.U ) ){
-      exRego := 0.U //地址1，cmd
-    } .elsewhen( isSpiRead ){
-      when( isPing_async ){ //取巧
+
+
+  when( bitSel.andR ){ //4线操作
+    when( isSpiRead ){
+      when( isPing_async ){ //取巧//应该增强约束
         exRego := datar_sync(0)
       } .otherwise{
         exRego := datar_sync(1)
       }
     }
-  } .otherwise{
+  } .otherwise{ //4线操作
     exRego := exRego << 4
   }
 
@@ -83,13 +94,12 @@ trait SyncSpiAsync{ this: SyncSpiInterfaceBase =>
     spiCnt := spiCnt + 1.U
   }
 
-
-  when( byteSel === 2.U & bitSel.andR ){
-    spiLenTemp := Cat( qspi.mosi, 0.U(8.W) )
-  } .elsewhen( byteSel === 3.U & bitSel === 0.U ){
-    spiLenTemp := Cat( spiLenTemp(11, 8), qspi.mosi, 0.U(4.W) )
-  } .elsewhen( byteSel === 3.U & bitSel.andR ){
-    spiLen := Cat( spiLenTemp(11, 4), qspi.mosi )
+  //单线操作
+  when( (byteSel === 2.U & bitSel >= 4.U) || (byteSel === 3.U) ){
+    spiLenTemp := Cat( spiLenTemp, qspi.mosi.extract(0) )
+  }
+  when( byteSel === 3.U & bitSel.andR ){
+    spiLen := Cat( spiLenTemp, qspi.mosi.extract(0) )
   }
 
 
@@ -122,8 +132,9 @@ trait SyncSpiAsync{ this: SyncSpiInterfaceBase =>
     }  
   }
 
+  //单线操作
   when( byteSel === 2.U & bitSel === 0.U ){ //CS为低，且SCK上跳的第0byte
-    when( qspi.mosi.extract(3) ){
+    when( qspi.mosi.extract(0) ){
       isSpiRead := true.B
     } .otherwise{
       isSpiWrite := true.B
@@ -141,8 +152,8 @@ trait SyncSpiAsync{ this: SyncSpiInterfaceBase =>
   }
 
   when( 
-    (byteSel === 2.U & bitSel === 0.U & (spiCnt <= spiLen) & qspi.mosi === "h8".U) ||
-    (byteSel > 2.U   & bitSel === 0.U & (spiCnt <= spiLen) & isSpiRead)
+    (byteSel === 2.U & bitSel === 0.U & (spiCnt <= spiLen) & qspi.mosi.extract(0) ) || //单线操作
+    (byteSel > 2.U   & bitSel === 0.U & (spiCnt <= spiLen) & isSpiRead)               //混合操作
   ){
     when( ~isPing_async ){
       isEnR_async(0) := true.B
@@ -225,3 +236,8 @@ with SyncSpiSync{
 }
 
 
+
+//改spi最大的风险是之前有个负负得正的特性在SM切换上，每次读操作都会多发起一次读才能正确操作SM切换
+//速度等级应该可以达到，需要单线转4线
+//理论量化分析
+