复位将在spi写操作0x40地址任意值后16拍触发，引出为外部输出io

tb/shinTest/ShinTopSpiTb.v

@@ -26,9 +26,11 @@ module ShinTopSpiTb(
     integer spidata_file;
     integer c_line;
 
+    wire [4:0] isSoftReset;
+
 ShinTop s_ShinTop_Mst(
   .clock(clock),
-  .reset(reset),
+  .reset(reset | isSoftReset[0]),
 
   .io_clk8x(clk8x),
   .io_dDatIn(1'b0),
@@ -55,13 +57,13 @@ ShinTop s_ShinTop_Mst(
   .io_oqspi_csn(spi_csn[10]),
 
   .io_rsp_valid(isResp),
-  .io_rsp_bits_isError()
-  // .io_rsp_bits_length()
+  .io_rsp_bits_isError(),
+  .io_isSoftReset(isSoftReset[0])
 );
 
 ShinTop s_ShinTop_slv0(
   .clock(clock),
-  .reset(reset),
+  .reset(reset | isSoftReset[1]),
 
   .io_clk8x(clk8x),
   .io_dDatIn(dDat_w[0]),
@@ -87,13 +89,13 @@ ShinTop s_ShinTop_slv0(
   .io_oqspi_csn(spi_csn[11]),
 
   .io_rsp_valid(),
-  .io_rsp_bits_isError()
-  // .io_rsp_bits_length()
+  .io_rsp_bits_isError(),
+  .io_isSoftReset(isSoftReset[1])
 );
 
 ShinTop s_ShinTop_slv1(
   .clock(clock),
-  .reset(reset),
+  .reset(reset | isSoftReset[2]),
 
   .io_clk8x(clk8x),
   .io_dDatIn(dDat_w[1]),
@@ -119,13 +121,13 @@ ShinTop s_ShinTop_slv1(
   .io_oqspi_csn(spi_csn[12]),
 
   .io_rsp_valid(),
-  .io_rsp_bits_isError()
-  // .io_rsp_bits_length()
+  .io_rsp_bits_isError(),
+  .io_isSoftReset(isSoftReset[2])
 );
 
 ShinTop s_ShinTop_slv2(
   .clock(clock),
-  .reset(reset),
+  .reset(reset | isSoftReset[3]),
 
   .io_clk8x(clk8x),
   .io_dDatIn(dDat_w[2]),
@@ -151,13 +153,13 @@ ShinTop s_ShinTop_slv2(
   .io_oqspi_csn(spi_csn[13]),
 
   .io_rsp_valid(),
-  .io_rsp_bits_isError()
-  // .io_rsp_bits_length()
+  .io_rsp_bits_isError(),
+  .io_isSoftReset(isSoftReset[3])
 );
 
 ShinTop s_ShinTop_slv3(
   .clock(clock),
-  .reset(reset),
+  .reset(reset | isSoftReset[4]),
 
   .io_clk8x(clk8x),
   .io_dDatIn(dDat_w[3]),
@@ -183,8 +185,8 @@ ShinTop s_ShinTop_slv3(
   .io_oqspi_csn(spi_csn[14]),
 
   .io_rsp_valid(),
-  .io_rsp_bits_isError()
-  // .io_rsp_bits_length()
+  .io_rsp_bits_isError(),
+  .io_isSoftReset(isSoftReset[4])
 );
 
 
@@ -766,6 +768,11 @@ initial begin
     txBuf[6+3] = 0;  //负载0x128 sync3脉冲宽度
     txBuf[7+3] = 0;  //负载0x129
     spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
+
+  //复位系统
+    txBuf[0+3] = 8'h01;
+    spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(0)) );//复位主站
+    spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(3)) );//复位从站2
 end