拆分主站从站软件

Makefile

@@ -60,44 +60,53 @@ test:
 
 
 sw:
-	# riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs \
+	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -mcmodel=medany -mexplicit-relocs \
-	# -I ./tb/sw/ -I ./tb/sw/src -I ./tb/sw/axi_gpio -I ./tb/sw/axi_uart -I ./tb/sw/axi_timer \
+	-I ./tb/sw/ -I ./tb/sw/src \
-	# -c ./tb/sw/src/main.c \
+	-c ./tb/sw/src/mstStartup.S \
-	# -o ./tb/sw/build/main.o
+	-o ./tb/sw/build/mstStartup.o
-
-	# riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs \
-	# -I ./tb/sw/ -I ./tb/sw/src -I ./tb/sw/axi_gpio -I ./tb/sw/axi_uart -I ./tb/sw/axi_timer \
-	# -c ./tb/sw/axi_uart/uart.c \
-	# -o ./tb/sw/build/uart.o
 
 	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -mcmodel=medany -mexplicit-relocs \
 	-I ./tb/sw/ -I ./tb/sw/src \
-	-c ./tb/sw/src/startup.S \
+	-c ./tb/sw/src/mstMain.S \
-	-o ./tb/sw/build/startup.o
+	-o ./tb/sw/build/mstMain.o
-
-	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -mcmodel=medany -mexplicit-relocs \
-	-I ./tb/sw/ -I ./tb/sw/src \
-	-c ./tb/sw/src/main.S \
-	-o ./tb/sw/build/main.o
 
 	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -nostdlib -nodefaultlibs -nostartfiles \
 	-T ./tb/sw/linker.lds \
-	./tb/sw/build/startup.o \
+	./tb/sw/build/mstStartup.o \
-	./tb/sw/build/main.o \
+	./tb/sw/build/mstMain.o \
-	-o ./tb/sw/build/test.elf
+	-o ./tb/sw/build/mstTest.elf
 
-	riscv64-unknown-elf-objcopy -O binary ./tb/sw/build/test.elf  ./tb/sw/build/test.bin
+	riscv64-unknown-elf-objcopy -O binary ./tb/sw/build/mstTest.elf  ./tb/sw/build/mstTest.bin
 
-	# riscv64-unknown-elf-objdump -h ./tb/sw/build/test.elf > ./tb/sw/build/test.dump
+	riscv64-unknown-elf-objdump --disassemble-all --disassemble-zeroes --section=.text --section=.text.startup --section=.text.init --section=.data --section=.bss --section=.rodata --section=.trap_entry ./tb/sw/build/mstTest.elf > ./tb/sw/build/mstTest.dump
-	riscv64-unknown-elf-objdump --disassemble-all --disassemble-zeroes --section=.text --section=.text.startup --section=.text.init --section=.data --section=.bss --section=.rodata --section=.trap_entry ./tb/sw/build/test.elf > ./tb/sw/build/test.dump
+
+	riscv64-unknown-elf-objcopy -O verilog  ./tb/sw/build/mstTest.elf  ./tb/sw/build/mstTest.verilog
+	sed -i 's/@800/@000/g' ./tb/sw/build/mstTest.verilog
 
 
-	# riscv64-unknown-elf-objcopy  --add-section .trap_entry=./tb/sw/build/test.bin ./tb/sw/build/test.elf  ./tb/sw/build/test_with_section.elf
+	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -mcmodel=medany -mexplicit-relocs \
-	
+	-I ./tb/sw/ -I ./tb/sw/src \
-	# riscv64-unknown-elf-readelf -a ./tb/sw/build/test.elf
+	-c ./tb/sw/src/slvStartup.S \
-	# riscv64-unknown-elf-objcopy --add-section .trap_entry=./tb/sw/build/test.bin ./tb/sw/build/test.elf ./tb/sw/build/test_with_section.elf
+	-o ./tb/sw/build/slvStartup.o
-	riscv64-unknown-elf-objcopy -O verilog  ./tb/sw/build/test.elf  ./tb/sw/build/test.verilog
+
-	sed -i 's/@800/@000/g' ./tb/sw/build/test.verilog
+	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -mcmodel=medany -mexplicit-relocs \
+	-I ./tb/sw/ -I ./tb/sw/src \
+	-c ./tb/sw/src/slvMain.S \
+	-o ./tb/sw/build/slvMain.o
+
+	riscv64-unknown-elf-gcc -Os -ggdb -march=rv32i -mabi=ilp32 -Wall -mcmodel=medany -mexplicit-relocs -nostdlib -nodefaultlibs -nostartfiles \
+	-T ./tb/sw/linker.lds \
+	./tb/sw/build/slvStartup.o \
+	./tb/sw/build/slvMain.o \
+	-o ./tb/sw/build/slvTest.elf
+
+	riscv64-unknown-elf-objcopy -O binary ./tb/sw/build/slvTest.elf  ./tb/sw/build/slvTest.bin
+
+	riscv64-unknown-elf-objdump --disassemble-all --disassemble-zeroes --section=.text --section=.text.startup --section=.text.init --section=.data --section=.bss --section=.rodata --section=.trap_entry ./tb/sw/build/slvTest.elf > ./tb/sw/build/slvTest.dump
+
+	riscv64-unknown-elf-objcopy -O verilog  ./tb/sw/build/slvTest.elf  ./tb/sw/build/slvTest.verilog
+	sed -i 's/@800/@000/g' ./tb/sw/build/slvTest.verilog
+
 
 fst:
 	gtkwave ./tb/build/wave.fst &

tb/backSys_tb.v

@@ -12,22 +12,87 @@ module backSys_TB (
 
   reg  overCLK;
 
-  wire  io_uDatIn;
+  wire [3:0] io_uDat;
-  wire  io_uDatOut;
+  wire [3:0] io_dDat;
-  wire  io_dDatIn;
+
-  wire  io_dDatOut;
+  wire [3:0] isLast;
 
 
-BackSys s_BackSys(
+BackSys s_Mst(
   .clock(clock),
   .reset(reset),
   .io_overCLK(overCLK),
-  .io_uDatIn(io_uDatIn),
+  .io_uDatIn(io_uDat[0]),
-  .io_uDatOut(io_uDatOut),
+  .io_uDatOut(),
-  .io_dDatIn(io_dDatIn),
+  .io_dDatIn(1'b0),
-  .io_dDatOut(io_dDatOut)
+  .io_dDatOut(io_dDat[0]),
+  .io_out(),
+  .io_in(32'b0),
+  .io_isOnline(),
+  .io_isLast(isLast[0]),
+  .io_DCIn(1'b0)
 );
 
+BackSys s_Slv0(
+  .clock(clock),
+  .reset(reset),
+  .io_overCLK(overCLK),
+  .io_uDatIn(io_uDat[1]),
+  .io_uDatOut(io_uDat[0]),
+  .io_dDatIn(io_dDat[0]),
+  .io_dDatOut(io_dDat[1]),
+  .io_out(),
+  .io_in(32'b0),
+  .io_isOnline(isLast[0]),
+  .io_isLast(isLast[1]),
+  .io_DCIn(1'b0)
+);
+
+BackSys s_Slv1(
+  .clock(clock),
+  .reset(reset),
+  .io_overCLK(overCLK),
+  .io_uDatIn(io_uDat[2]),
+  .io_uDatOut(io_uDat[1]),
+  .io_dDatIn(io_dDat[1]),
+  .io_dDatOut(io_dDat[2]),
+  .io_out(),
+  .io_in(32'b0),
+  .io_isOnline(isLast[1]),
+  .io_isLast(isLast[2]),
+  .io_DCIn(1'b0)
+);
+
+
+BackSys s_Slv2(
+  .clock(clock),
+  .reset(reset),
+  .io_overCLK(overCLK),
+  .io_uDatIn(io_uDat[3]),
+  .io_uDatOut(io_uDat[2]),
+  .io_dDatIn(io_dDat[2]),
+  .io_dDatOut(io_dDat[3]),
+  .io_out(),
+  .io_in(32'b0),
+  .io_isOnline(isLast[2]),
+  .io_isLast(isLast[3]),
+  .io_DCIn(1'b0)
+);
+
+BackSys s_Slv3(
+  .clock(clock),
+  .reset(reset),
+  .io_overCLK(overCLK),
+  .io_uDatIn(1'b0),
+  .io_uDatOut(io_uDat[3]),
+  .io_dDatIn(io_dDat[3]),
+  .io_dDatOut(),
+  .io_out(),
+  .io_in(32'b0),
+  .io_isOnline(isLast[3]),
+  .io_isLast(1'b1),
+  .io_DCIn(1'b0)
+);
 
 
 initial begin
@@ -54,18 +119,18 @@ initial begin
 end
 
 
-`define SRAM0 s_BackSys.sram.mem_0
+	`define SRAM0 s_Mst.sram.mem_0
-`define SRAM1 s_BackSys.sram.mem_1
+	`define SRAM1 s_Mst.sram.mem_1
-`define SRAM2 s_BackSys.sram.mem_2
+	`define SRAM2 s_Mst.sram.mem_2
-`define SRAM3 s_BackSys.sram.mem_3
+	`define SRAM3 s_Mst.sram.mem_3
 
 
 	localparam DP = 2**14;
-	integer i, by;
+	integer i;
 
 		reg [7:0] mem [0:200000];
 		initial begin
-			$readmemh("./tb/sw/build/test.verilog", mem);
+			$readmemh("./tb/sw/build/mstTest.verilog", mem);
 			for ( i = 0; i < DP; i = i + 1 ) begin
 				`SRAM0[i] = | mem[i*4+0] ? mem[i*4+0]: 8'h0;
 				`SRAM1[i] = | mem[i*4+1] ? mem[i*4+1]: 8'h0;
@@ -74,10 +139,57 @@ end
 
 				// $display("ITCM %h: %h,%h", i*4,`SRAM_ODD.ram[i],`SRAM_EVE.ram[i]);
 			end
-
 		end 
 
 
+	`define SLV0_SRAM0 s_Slv0.sram.mem_0
+	`define SLV0_SRAM1 s_Slv0.sram.mem_1
+	`define SLV0_SRAM2 s_Slv0.sram.mem_2
+	`define SLV0_SRAM3 s_Slv0.sram.mem_3
+	`define SLV1_SRAM0 s_Slv1.sram.mem_0
+	`define SLV1_SRAM1 s_Slv1.sram.mem_1
+	`define SLV1_SRAM2 s_Slv1.sram.mem_2
+	`define SLV1_SRAM3 s_Slv1.sram.mem_3
+	`define SLV2_SRAM0 s_Slv2.sram.mem_0
+	`define SLV2_SRAM1 s_Slv2.sram.mem_1
+	`define SLV2_SRAM2 s_Slv2.sram.mem_2
+	`define SLV2_SRAM3 s_Slv2.sram.mem_3
+	`define SLV3_SRAM0 s_Slv3.sram.mem_0
+	`define SLV3_SRAM1 s_Slv3.sram.mem_1
+	`define SLV3_SRAM2 s_Slv3.sram.mem_2
+	`define SLV3_SRAM3 s_Slv3.sram.mem_3
+
+	localparam DPS = 2**14;
+
+		reg [7:0] mem1 [0:200000];
+		initial begin
+			$readmemh("./tb/sw/build/slvTest.verilog", mem);
+			for ( i = 0; i < DP; i = i + 1 ) begin
+				`SLV0_SRAM0[i] = | mem[i*4+0] ? mem[i*4+0]: 8'h0;
+				`SLV0_SRAM1[i] = | mem[i*4+1] ? mem[i*4+1]: 8'h0;
+				`SLV0_SRAM2[i] = | mem[i*4+2] ? mem[i*4+2]: 8'h0;
+				`SLV0_SRAM3[i] = | mem[i*4+3] ? mem[i*4+3]: 8'h0;
+
+				`SLV1_SRAM0[i] = | mem[i*4+0] ? mem[i*4+0]: 8'h0;
+				`SLV1_SRAM1[i] = | mem[i*4+1] ? mem[i*4+1]: 8'h0;
+				`SLV1_SRAM2[i] = | mem[i*4+2] ? mem[i*4+2]: 8'h0;
+				`SLV1_SRAM3[i] = | mem[i*4+3] ? mem[i*4+3]: 8'h0;
+
+				`SLV2_SRAM0[i] = | mem[i*4+0] ? mem[i*4+0]: 8'h0;
+				`SLV2_SRAM1[i] = | mem[i*4+1] ? mem[i*4+1]: 8'h0;
+				`SLV2_SRAM2[i] = | mem[i*4+2] ? mem[i*4+2]: 8'h0;
+				`SLV2_SRAM3[i] = | mem[i*4+3] ? mem[i*4+3]: 8'h0;
+
+				`SLV3_SRAM0[i] = | mem[i*4+0] ? mem[i*4+0]: 8'h0;
+				`SLV3_SRAM1[i] = | mem[i*4+1] ? mem[i*4+1]: 8'h0;
+				`SLV3_SRAM2[i] = | mem[i*4+2] ? mem[i*4+2]: 8'h0;
+				`SLV3_SRAM3[i] = | mem[i*4+3] ? mem[i*4+3]: 8'h0;
+				// $display("ITCM %h: %h,%h", i*4,`SRAM_ODD.ram[i],`SRAM_EVE.ram[i]);
+			end
+		end 
+
+
+
 
 initial
 begin

tb/sw/src/slvMain.S

@@ -0,0 +1,49 @@
+
+#define cdr_0_tx_status     0x40000000
+#define cdr_0_tx_txLen      0x40000004
+#define cdr_0_tx_txFifo     0x40000008
+#define cdr_0_rx_softReset  0x40000010
+#define cdr_0_rx_status     0x40000014
+#define cdr_0_rx_rxLen      0x40000018
+#define cdr_0_rx_rxFifo     0x4000001c
+#define cdr_1_tx_status     0x40000080
+#define cdr_1_tx_txLen      0x40000084
+#define cdr_1_tx_txFifo     0x40000088
+#define cdr_1_rx_softReset  0x40000090
+#define cdr_1_rx_status     0x40000094
+#define cdr_1_rx_rxLen      0x40000098
+#define cdr_1_rx_rxFifo     0x4000009c
+
+.global main
+
+
+main:
+	lui  x5, %hi(cdr_0_tx_status)
+
+	li   x6, 128
+	sw	 x6, 4(x5) #cdr_0_tx_txLen
+
+    li   x6, 32              # 设置循环次数
+1:
+	beqz x15, 3f             # 如果x10为0，则跳到3
+2:
+	li   x15, 0              # 清标志位
+    lw   x7, 0(x5)           # 读取cdr_0_tx_status的值
+    andi x7, x7, 0x2         # 检查第1比特（位1）
+    bnez x7, 2b              # 如果第1比特不为0，则回到2处继续循环
+
+3:
+    # 向cdr_0_tx_txFifo地址写入0x55，循环32次
+    sw   x6, 8(x5)          # 向cdr_0_tx_txFifo写入0x55
+    addi x6, x6, -1         # 递减计数器
+    bnez x6, 1b             # 如果计数器不为0，则继续循环
+
+4:	
+	j 4b 
+
+
+
+
+
+
+

tb/sw/src/slvStartup.S

@@ -0,0 +1,54 @@
+
+
+#include "custom_ops.S"
+
+
+.extern main
+.globl _prog_start
+.section .text.init
+
+
+_prog_start:
+	li x15, 0
+	picorv32_maskirq_insn(zero, zero)
+	call main
+
+	li gp, 1;
+	ecall
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+.balign 32
+.section .trap_entry, "ax", %progbits
+trap_entry:
+	# q0 return address
+	# q1 bitmask of all IRQ to be handled, may be more than one IRQ 
+	# q2 q3 unused, can be use as temp storage register
+
+	# q寄存器已经禁用， Without the q-registers, the irq return address will be stored in x3 (gp) and the IRQ bitmask in x4 (tp),
+
+	addi x15, x4, 0
+
+	picorv32_retirq_insn()
+
+
+