修改测试方案

tb/shinTest/Makefile_vcs

@@ -1,6 +1,7 @@
 .PHONY:com sim clean
 
 OUTPUT = shin_test
+CPU_COUNT := $(shell nproc)
 
 VCS = vcs -sverilog +v2k -timescale=1ns/1ps   \
 	-full64                                   \
@@ -8,6 +9,7 @@ VCS = vcs -sverilog +v2k -timescale=1ns/1ps   \
 	-l compile.log                            \
 	-debug_access+none						  \
 	+define+VCS_COMPILE						  \
+	-fastpartcomp=j$(nproc) 				  \
 
 SIM = ./${OUTPUT} -l run.log
 
@@ -15,10 +17,12 @@ testShin_vcs:
 	python3 ./shinTest/gen_pkt.py
 	mkdir -p generated/log
 	rm -rf generated/log/*
+	@echo "Available CPUs: ${CPU_COUNT}"
 	${VCS} -f ./shinTest_vcs.f
 	${SIM}
 	python3 ./shinTest/check_testcase.py
 
+
 testShinClk_vcs:
 	python3 ./shinTest/gen_pkt_clk.py
 	mkdir -p generated/log

tb/shinTest/ShinTopSpiTb.v

@@ -170,7 +170,7 @@ ShinTop s_ShinTop_Mst(
   .io_latchPin_0(latch0),
   .io_latchPin_1(latch1),
   .io_hwSerial(`HW_SERIAL),
-  .io_uniCode(0)
+  .io_uniCode(64'h0)
 );
 
 `include "slave_dev_def.vh"

tb/shinTest/ShinTopSpiTb_clk.v

@@ -145,7 +145,7 @@ ShinTop s_ShinTop_Mst(
   .io_latchPin_0(latch0),
   .io_latchPin_1(latch1),
   .io_hwSerial(`HW_SERIAL),
-  .io_uniCode(0)
+  .io_uniCode(64'h0)
 );
 
 `include "slave_dev_def.vh"

tb/shinTest/check_testcase.py

@@ -40,6 +40,7 @@ def parse_value(value):
     return parsed_value, mask
 
 def compare_files(source_file, target_file):
+    warning_need_recheck = 0
     try:
         with open(source_file, 'r') as src, open(target_file, 'r') as tgt:
             source_lines = src.readlines()
@@ -62,6 +63,9 @@ def compare_files(source_file, target_file):
                     continue
                 else:
                     if src_values[0].strip().lower() == 'x':
+                        if warning_need_recheck == 0:
+                            print(f'[\033[93mWARNING\033[0m] Ignored lines detected. This test case requires manual comparison. \n\t[\033[93mTARGET\033[0m] {target_file}\t[\033[93mSRC\033[0m] {source_file}')
+                            warning_need_recheck = 1
                         continue
 
             line_match = True

tb/shinTest/pyutils/GenPkt.py

@@ -318,7 +318,7 @@ def genSlvSMWriteData(dev, sm, data_len, data = None, wlog=True):
 
     code = '''txBuf[3] = 8'h%02x;\n'''%(data_len & 0xff, )\
         + '''txBuf[4] = 8'h%02x;\n'''%(int(data_len/256) & 0xff,)\
-        + '''%s((16'h0%04x), (`SPI_WRITE), (2), (`IF_IDX(%d)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", smaddr[sm], dev)
+        + '''%s((16'h%04x), (`SPI_WRITE), (2), (`IF_IDX(%d)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", smaddr[sm], dev)
     
     for i in range(data_len):
         code = code + '''txBuf[%d + 3] = 8'h%02x;\n'''%(i, data[i])

tb/shinTest/shinTestClk_vcs.f

@@ -1,24 +1,2 @@
 +incdir+./generated/shin
 ./shinTest/ShinTopSpiTb_clk.v
-./generated/shin/b4b5DualDecode.v
-./generated/shin/b4b5DualEncode.v
-./generated/shin/b8b10Decode.v
-./generated/shin/b8b10Encode.v
-./generated/shin/CDRInAxis.v
-./generated/shin/CDRInMultiSample.v
-./generated/shin/CDROut.v
-./generated/shin/crc32_8.v
-./generated/shin/Interface.v
-./generated/shin/MasterParser.v
-./generated/shin/MstSlvSwitch.v
-./generated/shin/QSpiInterface.v
-./generated/shin/Queue_4.v
-./generated/shin/Queue.v
-./generated/shin/ShareSRAM2k.v
-./generated/shin/ShinTop.v
-./generated/shin/SlaveParser.v
-./generated/shin/SlaveRecParser.v
-./generated/shin/SlaveSendGen.v
-./generated/shin/SMUnit_4.v
-./generated/shin/SMUnit.v
-./generated/shin/SSpiInterface.v

tb/shinTest/shinTest_vcs.f

@@ -1,24 +1,2 @@
 +incdir+./generated/shin
-./shinTest/ShinTopSpiTb_clk.v
-./generated/shin/b4b5DualDecode.v
-./generated/shin/b4b5DualEncode.v
-./generated/shin/b8b10Decode.v
-./generated/shin/b8b10Encode.v
-./generated/shin/CDRInAxis.v
-./generated/shin/CDRInMultiSample.v
-./generated/shin/CDROut.v
-./generated/shin/crc32_8.v
-./generated/shin/Interface.v
-./generated/shin/MasterParser.v
-./generated/shin/MstSlvSwitch.v
-./generated/shin/QSpiInterface.v
-./generated/shin/Queue_4.v
-./generated/shin/Queue.v
-./generated/shin/ShareSRAM2k.v
-./generated/shin/ShinTop.v
-./generated/shin/SlaveParser.v
-./generated/shin/SlaveRecParser.v
-./generated/shin/SlaveSendGen.v
-./generated/shin/SMUnit_4.v
-./generated/shin/SMUnit.v
-./generated/shin/SSpiInterface.v
+./shinTest/ShinTopSpiTb.v

tb/shinTest/testcase/base.py

@@ -2484,6 +2484,11 @@ def tc29():
     genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                         +genMessageCode("--清除中断")
                         +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        
+                        +genIFRwDataCode(1, 0x180, True, 128, list(range(128)))
+                        +genIFRwDataCode(2, 0x180, True, 128, list(range(4, 128 + 4)))
+                        +genIFRwDataCode(3, 0x180, True, 128, list(range(8, 128 + 8)))
+                        +genIFRwDataCode(4, 0x180, True, 128, list(range(16, 128 + 16)))
                         )
 
     genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)

tb/shinTest/testcase/environment.py

@@ -191,7 +191,7 @@ def __GenDevice(id, TerminateNode = False, diffclk = False):
         multiclk = "multiCLK2"
         
     code_device = ("\tShinTop s_ShinTop_slv%d(\n"%(id, )
-        +"\t.clock(clock),\n"
+        +"\t.clock(%s),\n"%(clk, )
         +"\t.reset(reset | isSoftReset_reg[%d]),\n\n"%(id + 1,)
 
         +"\t.io_multiCLK_0(%s[0]),\n"%(multiclk, )
@@ -238,7 +238,7 @@ def __GenDevice(id, TerminateNode = False, diffclk = False):
         +"\t.io_latchPin_0(latch0),\n"
         +"\t.io_latchPin_1(latch1),\n"
         +"\t.io_hwSerial(`HW_SERIAL),\n"
-        +"\t.io_uniCode(0)\n"
+        +"\t.io_uniCode(64'h0)\n"
         +"\t);\n\n\n"
     )
     return code_device