#include <stdint.h>
// #include "uart.h"
// #include "gpio.h"
// #include "timer.h"
#include "tl2cdr.h"






	 
static inline void error() {
    while(1);
}


// extern volatile uint32_t *cdr_status = (uint32_t*)( TL2CDR_BASE + CDR_ReadStatus ); //read
// extern volatile uint32_t *cdr_txLen  = (uint32_t*)( TL2CDR_BASE + CDR_WriteTxLen ); //write
// extern volatile uint32_t *cdr_txFifo = (uint32_t*)( TL2CDR_BASE + CDR_WriteTxFifo ); //write
// extern volatile uint32_t *cdr_direct = (uint32_t*)( TL2CDR_BASE + CDR_WriteTransDir ); //write
// extern volatile uint32_t *cdr_softReset = (uint32_t*)( TL2CDR_BASE + CDR_WriteSoftReset ); //write
// extern volatile uint32_t *cdr_rxLen     = (uint32_t*)( TL2CDR_BASE + CDR_ReadRxLen ); //read
// extern volatile uint32_t *cdr_rxFifo    = (uint32_t*)( TL2CDR_BASE + CDR_ReadRxFifo ); //read



void main()
{
	uint32_t readDat;
	uint32_t operator;
	uint32_t downRecvLen;
	uint32_t upRecvLen;

	uint32_t slvNum;
	uint32_t totNum;

	uint32_t isLast;

	uint32_t led = 0;


		*cdr_softReset = 1; //复位脉冲
		*cdr_direct = 0;
		register uint32_t flag;

		asm volatile ( //timer 2s
			"1:\n"
			"rdcycle %0\n"
			// "srli %0, %0, 12\n"
			"srli %0, %0, 27\n"
			// "srli %0, %0, 26\n"
			"andi %0, %0, 0x1\n"
			"beqz %0, 1b\n"
			:"+r"(flag)
		);

		// if( led ){
		// 	*WriteGpio = 0xFFFFFFFF;
		// 	led = 0;
		// } else{
		// 	*WriteGpio = 0x0;
		// 	led = 1;		
		// }


		//发送下行包头
		*cdr_txLen = 520; //总长520
		*cdr_txFifo = (512 << 20) |( 0 << 16) | 0x0000; //负载长度512，操作数0， 参数全0
		*cdr_txFifo = 0x00000000;

		for( uint32_t i = 0; i < 512/4; i ++ ){
			*cdr_txFifo = 0x00000000;
		}

		//等待发送完成标志
		asm volatile (
			"1:\n"
			"andi %0, sp, 0x01\n"
			"beqz %0, 1b\n"
			"andi sp, sp, 0xFE\n"
			:"+r"(flag)
		);

		*cdr_softReset = 1; //复位脉冲
		*cdr_direct = 1;    //方向切换上行


		//接收第一个包
		asm volatile (
			"1:\n"
			"andi %0, sp, 0x04\n"
			"beqz %0, 1b\n"
			"andi sp, sp, 0xFB\n"
			:"+r"(flag)
		);
				
		readDat = *cdr_rxFifo;	



		// operator = (readDat >> 16) & 0xf; //速度不够，不校验
		upRecvLen = readDat >> 20;


		//接收第二个包
		// asm volatile (
		// 	"andi %0, sp, 0x08\n"
		// 	"1:\n"
		// 	"bnez %0, 1b\n" //error //速度不够，不校验
		// :"+r"(flag),
		// );

		uint32_t temp = *cdr_rxFifo;

		//上行转发负载
		for( uint32_t i = 0; i < (upRecvLen >> 2); i ++ ){ //一次传4byte
			register uint32_t upData;
			asm volatile (
				"andi %0, sp, 0x80\n"
				"1:\n"
				"bnez %0, 1b\n" //error 速度不够，不再检查接收
				"lw %1, 0x01c(x0)\n"
				:"+r"(flag), "+r"(upData)
			);
		}

		//CRC
		asm volatile (
			"andi %0, sp, 0x08\n"
			"1:\n"
			"bnez %0, 1b\n" //error
			:"+r"(flag)
		);
		uint32_t crc = *cdr_rxFifo; //CRC

		//等待接收完成标志
		asm volatile (
			"1:\n"
			"andi %0, sp, 0x08\n"
			"beqz %0, 1b\n"
			"andi sp, sp, 0xF7\n"
			:"+r"(flag)
		);

		totNum = (upRecvLen >> 3);


}