造了一个新的测试用例，测试没有通过

tb/shinTest/gen_pkt.py

@@ -44,7 +44,7 @@ if __name__ == '__main__':
     ebmmu.tc12()
     ebmmu.tc13()
     ebmmu.tc14()
-    ebmmu.tc15()
+    add_tc_2_runlist(ebmmu.tc15())
     add_tc_2_runlist(ebmmu.tc16())
 
     watchdog.tc1()

tb/shinTest/testcase/ebmmu.py

@@ -1423,6 +1423,11 @@ def tc14():
 
 def tc15():
     genPkt = GenPkt()
+    
+    gen_file_def = "ebmmu_tc15"
+    sm_idx = 0
+    tc_des = "测试8个ebmmu全配置下运行，每两个ebmmu对应一个sm。每个ebmmu必须对齐、足长的写入，\\n" \
+           + "对应的sm才能正常工作。QSPI/SPI侧能正常的读到相关的数据。"
 
     #--------------------------------------------------------------------------
     #>>>>>>设置EB-MMU,测试用例15，读，检查权限
@@ -1555,205 +1560,9 @@ def tc15():
     data[1] = (sm_size >> 8) & 0xff
     genPkt.addSubPkt(0x0, 0, 0x31a, 0xe, 2, data)
 
-    
-    gen_file_def = "ebmmu_tc15_settings"
-    sm_idx = 0
-
-    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
-                       +genWriteTransPktCode(gen_file_def, sm_idx)
-                       +genTrgTransPktCode(gen_file_def, sm_idx)
-                       +genReadAckPktCode(gen_file_def, sm_idx))
-
-    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
-
-    #>>>>>>用EB-MMU方式读取EB-MMU设置, 15
-    genPkt.clean()
-    genPkt.setPktType(0)
-
-    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
-    data = [(i & 0xff) for i in range(sm_size * 16)]
-
-    gen_file_def = "ebmmu_tc15_write"
-    sm_idx = 0
-
-    genPkt.addSubPkt(0x1000, 2, 0, 0x1, sm_size * 16, data)
-
-    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
-                       +genWriteTransPktCode(gen_file_def, sm_idx)
-                       +genTrgTransPktCode(gen_file_def, sm_idx)
-                       +genReadAckPktCode(gen_file_def, sm_idx)
-                       +genIFRwDataCode(1, 0x300, False, 0x20)
-                       +genIFRwDataCode(2, 0x300, False, 0x20)
-                       +genIFRwDataCode(3, 0x300, False, 0x20)
-                       +genIFRwDataCode(4, 0x300, False, 0x20)
-                       +genSlvSMReadData(1, 0, sm_size)
-                       +genSlvSMReadData(1, 2, sm_size)
-                       +genSlvSMReadData(1, 4, sm_size)
-                       +genSlvSMReadData(1, 6, sm_size)
-                       +genSlvSMReadData(2, 0, sm_size)
-                       +genSlvSMReadData(2, 2, sm_size)
-                       +genSlvSMReadData(2, 4, sm_size)
-                       +genSlvSMReadData(2, 6, sm_size)
-                       +genSlvSMReadData(3, 0, sm_size)
-                       +genSlvSMReadData(3, 2, sm_size)
-                       +genSlvSMReadData(3, 4, sm_size)
-                       +genSlvSMReadData(3, 6, sm_size)
-                       +genSlvSMReadData(4, 0, sm_size)
-                       +genSlvSMReadData(4, 2, sm_size)
-                       +genSlvSMReadData(4, 4, sm_size)
-                       +genSlvSMReadData(4, 6, sm_size)
-                       +genIFRwDataCode(1, 0x300, False, 0x20)
-                       +genIFRwDataCode(2, 0x300, False, 0x20)
-                       +genIFRwDataCode(3, 0x300, False, 0x20)
-                       +genIFRwDataCode(4, 0x300, False, 0x20)
-                       )
-
-    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
-    return gen_file_def
-
-
-def tc16():
-    genPkt = GenPkt()
-
-    #--------------------------------------------------------------------------
-    #>>>>>>设置EB-MMU,测试用例15，读，检查权限
-    genPkt.clean()
-    genPkt.setPktType(0)
-
-    addr = 0x10000000
-    addr_off = 0x0
-    sm_size = 16
-
-    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
-    data = [0,] * 256
-
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    genPkt.addSubPkt(0x1, 0, 0x0200, 0x1, 80, data)
-
-    #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    data = [0,] * 256
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    genPkt.addSubPkt(0x2, 0, 0x0200, 0x1, 80, data)
-
-
-    #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    data = [0,] * 256
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    genPkt.addSubPkt(0x3, 0, 0x0200, 0x1, 80, data)
-
-
-    #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    data = [0,] * 256
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    addr_off = addr_off + sm_size
-    taddr = addr + addr_off
-    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
-    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
-
-    genPkt.addSubPkt(0x4, 0, 0x0200, 0x1, 80, data)
-
-    data = [0,] * 2
-    data[0] = (sm_size >> 0) & 0xff
-    data[1] = (sm_size >> 8) & 0xff
-    genPkt.addSubPkt(0x0, 0, 0x302, 0xe, 2, data)
-
-    data = [0,] * 2
-    data[0] = (sm_size >> 0) & 0xff
-    data[1] = (sm_size >> 8) & 0xff
-    genPkt.addSubPkt(0x0, 0, 0x30a, 0xe, 2, data)
-
-    data = [0,] * 2
-    data[0] = (sm_size >> 0) & 0xff
-    data[1] = (sm_size >> 8) & 0xff
-    genPkt.addSubPkt(0x0, 0, 0x312, 0xe, 2, data)
-
-
-    data = [0,] * 2
-    data[0] = (sm_size >> 0) & 0xff
-    data[1] = (sm_size >> 8) & 0xff
-    genPkt.addSubPkt(0x0, 0, 0x31a, 0xe, 2, data)
-
-    
-    gen_file_def = "ebmmu_tc16"
-    sm_idx = 0
-    tc_des = "一个非常牛叉的测试用例"
-
     genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des))
 
-    genPkt.addAfterExc( genWriteTransLenCode(gen_file_def, sm_idx)
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                        +genWriteTransPktCode(gen_file_def, sm_idx)
                        +genTrgTransPktCode(gen_file_def, sm_idx)
                        +genReadAckPktCode(gen_file_def, sm_idx))
@@ -1767,7 +1576,7 @@ def tc16():
     #subPkt参数：索引、索引类型、地址、命令、长度、数据   
     data = [(i & 0xff) for i in range(sm_size * 16)]
 
-    gen_file_def_ap = "ebmmu_tc16_rw"
+    gen_file_def_ap = "ebmmu_tc15_rw"
     sm_idx = 0
 
     genPkt.addSubPkt(0x1000, 2, 0, 0x1, sm_size * 16, data)
@@ -1800,6 +1609,227 @@ def tc16():
                        +genIFRwDataCode(2, 0x300, False, 0x20)
                        +genIFRwDataCode(3, 0x300, False, 0x20)
                        +genIFRwDataCode(4, 0x300, False, 0x20)
+                       +genTcEndFrameCode(gen_file_def)
+                       )
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+    return gen_file_def
+
+
+def tc16():
+    genPkt = GenPkt()
+    
+    gen_file_def = "ebmmu_tc16"
+    sm_idx = 0
+    tc_des = "测试8个ebmmu全配置下运行，每两个ebmmu对应一个sm。每个ebmmu必须对齐、足长的写入，\\n" \
+           + "对应的sm才能正常工作。两次写入数据，复位设备1的SM1，SM1状态复原，不能读取到有效的数据。"
+    
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    addr = 0x10000000
+    addr_off = 0x0
+    sm_size = 16
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [0,] * 256
+
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    genPkt.addSubPkt(0x1, 0, 0x0200, 0x1, 80, data)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 256
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    genPkt.addSubPkt(0x2, 0, 0x0200, 0x1, 80, data)
+
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 256
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    genPkt.addSubPkt(0x3, 0, 0x0200, 0x1, 80, data)
+
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 256
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 0, taddr, 0x0800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 1, taddr + sm_size / 2, 0x0800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 2, taddr, 0x1800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 3, taddr + sm_size / 2, 0x1800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 4, taddr, 0x2800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 5, taddr + sm_size / 2, 0x2800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    addr_off = addr_off + sm_size
+    taddr = addr + addr_off
+    setting_ebmmu_regs(data, 6, taddr, 0x3800, sm_size / 2, 0x2, 0x1)
+    setting_ebmmu_regs(data, 7, taddr + sm_size / 2, 0x3800 + sm_size / 2, sm_size / 2, 0x2, 0x1)
+
+    genPkt.addSubPkt(0x4, 0, 0x0200, 0x1, 80, data)
+
+    data = [0,] * 2
+    data[0] = (sm_size >> 0) & 0xff
+    data[1] = (sm_size >> 8) & 0xff
+    genPkt.addSubPkt(0x0, 0, 0x302, 0xe, 2, data)
+
+    data = [0,] * 2
+    data[0] = (sm_size >> 0) & 0xff
+    data[1] = (sm_size >> 8) & 0xff
+    genPkt.addSubPkt(0x0, 0, 0x30a, 0xe, 2, data)
+
+    data = [0,] * 2
+    data[0] = (sm_size >> 0) & 0xff
+    data[1] = (sm_size >> 8) & 0xff
+    genPkt.addSubPkt(0x0, 0, 0x312, 0xe, 2, data)
+
+
+    data = [0,] * 2
+    data[0] = (sm_size >> 0) & 0xff
+    data[1] = (sm_size >> 8) & 0xff
+    genPkt.addSubPkt(0x0, 0, 0x31a, 0xe, 2, data)
+
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des))
+
+    genPkt.addAfterExc( genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+    #>>>>>>用EB-MMU方式读取EB-MMU设置, 15
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [(i & 0xff) for i in range(sm_size * 16)]
+
+    gen_file_def_ap = "ebmmu_tc16_rw"
+    sm_idx = 0
+
+    genPkt.addSubPkt(0x1000, 2, 0, 0x1, sm_size * 16, data)
+    
+    data = [((i * 2)& 0xff) for i in range(sm_size * 16)]
+    genPkt.addSubPkt(0x1000, 2, 0, 0x1, sm_size * 16, data)
+    
+    rst_data=[0x0, ]
+    
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genIFRwDataCode(1, 0x300, False, 0x20)
+                       +genIFRwDataCode(2, 0x300, False, 0x20)
+                       +genIFRwDataCode(3, 0x300, False, 0x20)
+                       +genIFRwDataCode(4, 0x300, False, 0x20)         
+                       +genSlvSMReadData(1, 0, sm_size)
+                       +genSlvSMReadData(1, 2, sm_size)
+                       +genSlvSMReadData(1, 4, sm_size)
+                       +genSlvSMReadData(1, 6, sm_size)
+                       +genSlvSMReadData(2, 0, sm_size)
+                       +genSlvSMReadData(2, 2, sm_size)
+                       +genSlvSMReadData(2, 4, sm_size)
+                       +genSlvSMReadData(2, 6, sm_size)
+                       +genSlvSMReadData(3, 0, sm_size)
+                       +genSlvSMReadData(3, 2, sm_size)
+                       +genSlvSMReadData(3, 4, sm_size)
+                       +genSlvSMReadData(3, 6, sm_size)
+                       +genSlvSMReadData(4, 0, sm_size)
+                       +genSlvSMReadData(4, 2, sm_size)
+                       +genSlvSMReadData(4, 4, sm_size)
+                       +genSlvSMReadData(4, 6, sm_size)
+                       +genIFRwDataCode(1, 0x300, False, 0x20)
+                       +genIFRwDataCode(1, 0x300, True, 1, rst_data)
+                       +genIFRwDataCode(1, 0x300, False, 0x20)
+                       +genIFRwDataCode(2, 0x300, False, 0x20)
+                       +genIFRwDataCode(3, 0x300, False, 0x20)
+                       +genIFRwDataCode(4, 0x300, False, 0x20)
+                       +genSlvSMReadData(1, 0, sm_size)
+                       +genSlvSMReadData(1, 2, sm_size)
+                       +genSlvSMReadData(1, 4, sm_size)
+                       +genSlvSMReadData(1, 6, sm_size)
+                       +genSlvSMReadData(2, 0, sm_size)
+                       +genSlvSMReadData(2, 2, sm_size)
+                       +genSlvSMReadData(2, 4, sm_size)
+                       +genSlvSMReadData(2, 6, sm_size)
+                       +genSlvSMReadData(3, 0, sm_size)
+                       +genSlvSMReadData(3, 2, sm_size)
+                       +genSlvSMReadData(3, 4, sm_size)
+                       +genSlvSMReadData(3, 6, sm_size)
+                       +genSlvSMReadData(4, 0, sm_size)
+                       +genSlvSMReadData(4, 2, sm_size)
+                       +genSlvSMReadData(4, 4, sm_size)
+                       +genSlvSMReadData(4, 6, sm_size)
+                       +genIFRwDataCode(1, 0x300, False, 0x20)
+                       +genIFRwDataCode(2, 0x300, False, 0x20)
+                       +genIFRwDataCode(3, 0x300, False, 0x20)
+                       +genIFRwDataCode(4, 0x300, False, 0x20)
                        +genTcEndFrameCode(gen_file_def))
 
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)