增加频率差160ppm的测试代码

tb/shinTest/testcase/environment.py

@@ -168,33 +168,42 @@ def bringup():
     
     add_tc_2_runlist(gen_file_def)
 
-def __GenDevice(id, TerminateNode = False):
+def __GenDevice(id, TerminateNode = False, diffclk = False):
     dout_code = "dDat_w[%d]"%(id + 1, )
     din_code = "uDat_w[%d]"%(id + 1, )
     if TerminateNode:
         dout_code = ""
         din_code = "1'b0"
         
+    
+    #clk = "clock"
+    clk = "multiCLK[0]"
+    multiclk = "multiCLK"
+    if diffclk:
+        #clk = "clock2"
+        clk = "multiCLK2[0]"
+        multiclk = "multiCLK2"
+        
     code_device = ("\tShinTop s_ShinTop_slv%d(\n"%(id, )
-        +"\t.clock(clock),\n"
+        +"\t.clock(%s),\n"%(clk, )
         +"\t.reset(reset | isSoftReset[%d]),\n\n"%(id + 1,)
 
-        +"\t.io_multiCLK_0(multiCLK[0]),\n"
-        +"\t.io_multiCLK_1(multiCLK[1]),\n"
-        +"\t.io_multiCLK_2(multiCLK[2]),\n"
-        +"\t.io_multiCLK_3(multiCLK[3]),\n"
-        +"\t.io_multiCLK_4(multiCLK[4]),\n"
-        +"\t.io_multiCLK_5(multiCLK[5]),\n"
-        +"\t.io_multiCLK_6(multiCLK[6]),\n"
-        +"\t.io_multiCLK_7(multiCLK[7]),\n"
-        +"\t.io_multiCLK_8(multiCLK[8]),\n"
-        +"\t.io_multiCLK_9(multiCLK[9]),\n"
-        +"\t.io_multiCLK_10(multiCLK[10]),\n"
-        +"\t.io_multiCLK_11(multiCLK[11]),\n"
-        +"\t.io_multiCLK_12(multiCLK[12]),\n"
-        +"\t.io_multiCLK_13(multiCLK[13]),\n"
-        +"\t.io_multiCLK_14(multiCLK[14]),\n"
-        +"\t.io_multiCLK_15(multiCLK[15]),\n\n"
+        +"\t.io_multiCLK_0(%s[0]),\n"%(multiclk, )
+        +"\t.io_multiCLK_1(%s[1]),\n"%(multiclk, )
+        +"\t.io_multiCLK_2(%s[2]),\n"%(multiclk, )
+        +"\t.io_multiCLK_3(%s[3]),\n"%(multiclk, )
+        +"\t.io_multiCLK_4(%s[4]),\n"%(multiclk, )
+        +"\t.io_multiCLK_5(%s[5]),\n"%(multiclk, )
+        +"\t.io_multiCLK_6(%s[6]),\n"%(multiclk, )
+        +"\t.io_multiCLK_7(%s[7]),\n"%(multiclk, )
+        +"\t.io_multiCLK_8(%s[8]),\n"%(multiclk, )
+        +"\t.io_multiCLK_9(%s[9]),\n"%(multiclk, )
+        +"\t.io_multiCLK_10(%s[10]),\n"%(multiclk, )
+        +"\t.io_multiCLK_11(%s[11]),\n"%(multiclk, )
+        +"\t.io_multiCLK_12(%s[12]),\n"%(multiclk, )
+        +"\t.io_multiCLK_13(%s[13]),\n"%(multiclk, )
+        +"\t.io_multiCLK_14(%s[14]),\n"%(multiclk, )
+        +"\t.io_multiCLK_15(%s[15]),\n\n"%(multiclk, )
 
         +"\t.io_dDatIn(dDat_w[%d]),\n"%(id, )
         +"\t.io_dDatOut(%s),\n"%(dout_code, )
@@ -292,7 +301,11 @@ def gen_slv_dev_num(num):
     
     code = ""
     for id in range(num - 1):
-        code = code + __GenDevice(id)
+        if id == 1:
+            code = code + __GenDevice(id, diffclk = True)
+        else:
+            code = code + __GenDevice(id)
+            
     code = code + __GenDevice(num - 1, True)
     
     genPkt.addAfterExc(code)