diff --git a/tb/shinTest/gen_pkt.py b/tb/shinTest/gen_pkt.py
index b01c24b..3cec86a 100755
--- a/tb/shinTest/gen_pkt.py
+++ b/tb/shinTest/gen_pkt.py
@@ -30,7 +30,7 @@ if __name__ == '__main__':
     sync.tc3()
     sync.tc4()
     
-    ebmmu.tc1()
+    add_tc_2_runlist(ebmmu.tc1())
     ebmmu.tc2()
     ebmmu.tc3()
     ebmmu.tc4()
diff --git a/tb/shinTest/pyutils/GenPkt.py b/tb/shinTest/pyutils/GenPkt.py
index e28c6c8..62d2f3f 100644
--- a/tb/shinTest/pyutils/GenPkt.py
+++ b/tb/shinTest/pyutils/GenPkt.py
@@ -222,7 +222,7 @@ def genWriteTransLenCode(gen_name, sm_idx, wlog=True):
         + '''%s( (`MST_RX%d_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", sm_idx,)
 
 def genWriteTransPktCode(gen_name, sm_idx, wlog=True):
-    return '''\n$fdisplay(spidata_file, "<<发包：");\n'''\
+    return f'''\n$fdisplay(spidata_file, "<<准备发包，使用SM{sm_idx}：");\n'''\
         + '''`DEF_%s(txBuf);\n'''%(gen_name, )\
         + '''%s( (`MST_TX%d_ADDR), (`SPI_WRITE), (`DEF_%s_len), (`IF_IDX(0)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", sm_idx, gen_name, )
 
@@ -236,7 +236,7 @@ def genReadAckPktCode(gen_name, sm_idx, wlog=True):
     return '''\n//等待回包\n'''\
         + '''_reset_deadline_ind = 1;\n'''\
         + '''@(posedge isResp or posedge _deadline_ind) #5 begin end\n'''\
-        + '''$fdisplay(spidata_file, ">>回包：");\n'''\
+        + f'''$fdisplay(spidata_file, ">>读取回包，使用SM{sm_idx}：");\n'''\
         + '''%s( (`MST_RX%d_ADDR), (`SPI_READ), (`DEF_%s_len), (`IF_IDX(0)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", sm_idx, gen_name,)
 
 def genEnableInsertTimeCode(pos, enableTime=True, enableDelay=True, wlog=True):
@@ -317,7 +317,7 @@ def genSlvSMReadData(dev, sm, data_len, wlog=True):
     if data_len > 2032:
         return ''
     
-    code = ""
+    code = f'''$fdisplay(spidata_file, "--读取设备{dev} SM{sm} 中的数据，读取长度{data_len}B");\n'''
     code = code + '''%s( (16'h%04x), (`SPI_READ), (%d), (`IF_IDX(%d)) );\n'''%("`SPI_TRANS" if wlog else "spi_trans", 0x800 + sm * 2048, data_len, dev)
 
     return code
diff --git a/tb/shinTest/testcase/ebmmu.py b/tb/shinTest/testcase/ebmmu.py
index 38fdb7b..d8850d4 100644
--- a/tb/shinTest/testcase/ebmmu.py
+++ b/tb/shinTest/testcase/ebmmu.py
@@ -3,6 +3,12 @@ from pyutils import *
 def tc1():
     genPkt = GenPkt()
 
+    gen_file_def = "ebmmu_tc01"
+    sm_idx = 0
+    tc_des = "每个从站测试1个ebmmu，共4个mmu，从0x1000_0000位置向后对齐，每个设备占10个字节。\\n" \
+           + "使用1包数据，将4个设备的数据一次性读上来。\\n"\
+           + "检查内容：ebmmu工作状态、回包工作计数、SMx的状态、中断状态、统计信息、相关时序"
+
     #-------------------------------------------------------------------------
     #>>>>>>设置EB-MMU 1
     genPkt.clean()
@@ -27,9 +33,7 @@ def tc1():
     setting_ebmmu_regs(data, 0, 0x1000001e, 0x0200, 0x0a, 0x3, 0x1)
     genPkt.addSubPkt(0x4, 0, 0x0200, 0x1, 10, data)
 
-
-    gen_file_def = "ebmmu_tc1_settings"
-    sm_idx = 0
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des))
 
     genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                        +genWriteTransPktCode(gen_file_def, sm_idx)
@@ -50,15 +54,15 @@ def tc1():
     genPkt.addSubPkt(0x03, 0, 0x0200, 0x0, 10, data)
     genPkt.addSubPkt(0x04, 0, 0x0200, 0x0, 10, data)
 
-    gen_file_def = "ebmmu_tc1_seq_read"
+    gen_file_def_ap = "ebmmu_tc01_rw1"
     sm_idx = 0
 
-    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
-                       +genWriteTransPktCode(gen_file_def, sm_idx)
-                       +genTrgTransPktCode(gen_file_def, sm_idx)
-                       +genReadAckPktCode(gen_file_def, sm_idx))
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx))
 
-    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
     
     #>>>>>>用EB-MMU方式读取EB-MMU设置
     genPkt.clean()
@@ -69,15 +73,17 @@ def tc1():
 
     genPkt.addSubPkt(0x1000, 2, 0x0000, 0x0, 40, data)
 
-    gen_file_def = "ebmmu_tc1_read"
+    gen_file_def_ap = "ebmmu_tc1_rw2"
     sm_idx = 0
 
-    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
-                       +genWriteTransPktCode(gen_file_def, sm_idx)
-                       +genTrgTransPktCode(gen_file_def, sm_idx)
-                       +genReadAckPktCode(gen_file_def, sm_idx))
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genTcEndFrameCode(gen_file_def)
+                       )
 
-    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
 
     return gen_file_def
 
@@ -1622,7 +1628,9 @@ def tc16():
     gen_file_def = "ebmmu_tc16"
     sm_idx = 0
     tc_des = "测试8个ebmmu全配置下运行，每两个ebmmu对应一个sm。每个ebmmu必须对齐、足长的写入，\\n" \
-           + "对应的sm才能正常工作。两次写入数据，复位设备1的SM1，SM1状态复原，不能读取到有效的数据。"
+           + "对应的sm才能正常工作。两次写入数据，复位设备1的SM1，SM1状态复原，不能读取到有效的数据。\\n"\
+           + "测试用例能成功运行完毕，除设备1的SM1，其余的SMx都能获得正确的数据。\\n\\n" \
+           + "检查内容：ebmmu工作状态、回包工作计数、SMx的状态、中断状态、统计信息、相关时序"
     
     genPkt.clean()
     genPkt.setPktType(0)