ruige/eb001
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

改写了全部的测试用例,用python生成数据和相关的辅助代码

Browse Source
This commit is contained in:
bacon
2025-05-28 13:56:39 +08:00
parent 7a53972c7e
commit bf3722446a
2 changed files with 94 additions and 107 deletions
Download Patch File Download Diff File Expand all files Collapse all files

121
tb/shinTest/ShinTopSpiTb.v
View File

@@ -3,13 +3,13 @@
`define ENABLE_REG_RW_TEST
`define ENABLE_DET_TEST
`define ENABLE_SET_ADDR_TEST
//`define ENABLE_SM1_SEND_TEST
//`define ENABLE_SMx_SEND_TEST
`define ENABLE_SM1_SEND_TEST
`define ENABLE_SMx_SEND_TEST
`define ENABLE_EXCHG_DATA_SEQ_TEST
//`define ENABLE_EXCHG_DATA_SEQ0_TEST
//`define ENABLE_EXCHG_DATA_SEQ1_TEST
//`define ENABLE_EXCHG_DATA_SEQ2_TEST
//`define ENABLE_EXCHG_DATA_BC_TEST
`define ENABLE_EXCHG_DATA_SEQ0_TEST
`define ENABLE_EXCHG_DATA_SEQ1_TEST
`define ENABLE_EXCHG_DATA_SEQ2_TEST
`define ENABLE_EXCHG_DATA_BC_TEST
`define ENABLE_SYNC_TEST
`define ENABLE_SYNC_SIG0_TEST
`define ENABLE_SYNC_SIG1_TEST
@@ -548,7 +548,7 @@ initial begin
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(3)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -637,7 +637,7 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -659,23 +659,7 @@ initial begin
$fdisplay(spidata_file, "--->>>设置顺序地址");
`include "set_addr_pkt.vh"
//长度
`DEF_set_addr_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
//子报文
$fdisplay(spidata_file, "<<发包：");
`DEF_set_addr_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_set_addr_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = `MST_TX_TRG;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_set_addr_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
//测试
spi_trans( (16'hc0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(1)) );
@@ -686,14 +670,13 @@ initial begin
//读写
#1000
$fdisplay(spidata_file, "--->>>设置顺序地址后，检查顺序地址");
//spi_trans( (16'h0010), (`SPI_READ), (5), (`IF_IDX(0)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -727,7 +710,7 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -741,7 +724,7 @@ initial begin
`include "sm1_pkt.vh"
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -760,7 +743,7 @@ initial begin
`include "sm2_pkt.vh"
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
@@ -779,7 +762,7 @@ initial begin
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -806,7 +789,7 @@ initial begin
`include "seq_0_pkt.vh"
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -824,7 +807,7 @@ initial begin
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -875,7 +858,7 @@ initial begin
`include "seq_2_pkt.vh"
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
`endif
@@ -888,25 +871,11 @@ initial begin
$fdisplay(spidata_file, "\n\n测试用例：广播交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n--->>>广播读");
`include "bc_r_pkt.vh"
`DEF_bc_r_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
$fdisplay(spidata_file, "<<发包：");
`DEF_bc_r_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = `MST_TX_TRG;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
@@ -919,28 +888,13 @@ initial begin
$fdisplay(spidata_file, "\n--->>>广播写");
`include "bc_w_pkt.vh"
`DEF_bc_w_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
$fdisplay(spidata_file, "<<发包：");
`DEF_bc_w_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_w_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = `MST_TX_TRG;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_bc_w_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -961,35 +915,9 @@ initial begin
//设置SM1在写入 0x18 len触发enq
`include "sync_pkt.vh"
`DEF_sync_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
$fdisplay(spidata_file, "<<发包：");
`DEF_sync_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_sync_pkt_len), (`IF_IDX(0)) ); //写入SM1
//写入替换时间戳替换地址
txBuf[0+3] = 8'h0c;
txBuf[1+3] = 8'hc0;
spi_trans( (16'h24), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //写入替换时间戳替换地址寄存器
//发布请求
txBuf[0+3] = `MST_TX_TRG;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_sync_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
//清除替换时间戳替换地址
txBuf[0+3] = 8'h00;
txBuf[1+3] = 8'h00;
spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -1023,7 +951,7 @@ initial begin
#100000
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
@@ -1041,13 +969,10 @@ initial begin
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "该测试用例运行时间：%2tns\n", (_t_end - _t_start) / 1000);
end
`endif
/*
#50000
//复位系统

80
tb/shinTest/gen_pkt.py
View File

@@ -184,13 +184,9 @@ class GenPkt(object):
#+ '''//写入替换时间戳替换地址\n'''
#+ '''txBuf[0+3] = 8'h0c;\n'''
#+ '''txBuf[1+3] = 8'hc0;\n'''
#+ '''spi_trans( (16'h24), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''
def genWriteTransLenCode(gen_name, sm_idx):
return '''\n//写入发送长度\n'''\
+ '''$fdisplay(spidata_file, "--写数据交换长度");\n'''\
+ '''`DEF_%s_sm(txBuf);\n'''%(gen_name, )\
+ '''spi_trans( (`MST_TX%d_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''%(sm_idx,)\
+ '''spi_trans( (`MST_RX%d_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''%(sm_idx,)
@@ -212,6 +208,26 @@ def genReadAckPktCode(gen_name, sm_idx):
+ '''$fdisplay(spidata_file, ">>回包：");\n'''\
+ '''spi_trans( (`MST_RX%d_ADDR), (`SPI_READ), (`DEF_%s_len), (`IF_IDX(0)) );\n'''%(sm_idx, gen_name,)
def genEnableInsertTimeCode(pos, enableTime=True, enableDelay=True):
data = pos & 0x3fff
if enableTime:
data = data | 0x8000
if enableDelay:
data = data | 0x4000
return '''//写入替换时间戳替换地址\n'''\
+ '''$fdisplay(spidata_file, "--增加时间戳插入");\n'''\
+ '''txBuf[0+3] = 8'h%x;\n'''%(data & 0xff, )\
+ '''txBuf[1+3] = 8'h%x;\n'''%((data >> 8) & 0xff, )\
+ '''spi_trans( (16'h24), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''
def genDisableInsertTimeCode():
return '''\n//清除替换时间戳替换地址\n'''\
+ '''$fdisplay(spidata_file, "--清除时间戳插入");\n'''\
+ '''txBuf[0+3] = 8'h00;\n'''\
+ '''txBuf[1+3] = 8'h00;\n'''\
+ '''spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器\n'''
if __name__ == '__main__':
genPkt = GenPkt()
@@ -423,9 +439,30 @@ if __name__ == '__main__':
#>>>>>>同步数据包
genPkt.clean()
genPkt.setPktType(0)
#subPkt参数：索引、索引类型、地址、命令、长度、数据
genPkt.addSubPkt(0x0, 0, random.randint(0, 65535), 0xc, 12, b'\0'*12)
genPkt.gen("./generated/shin/sync_pkt.vh", 1)
genPkt.addBeforeExc(genEnableInsertTimeCode(0xc))
gen_file_def = "sync_pkt"
sm_idx = 0
genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+genWriteTransPktCode(gen_file_def, sm_idx)
+genTrgTransPktCode(gen_file_def, sm_idx)
+genReadAckPktCode(gen_file_def, sm_idx)
+genDisableInsertTimeCode())
genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
#-------------------------------------------------------------------------
#>>>>>>设置同步信号的数据包
@@ -576,7 +613,15 @@ if __name__ == '__main__':
genPkt.addSubPkt(0x0, 0, random.randint(0, 65535), 0xb, 2, data)
genPkt.gen("./generated/shin/set_addr_pkt.vh", 1)
gen_file_def = "set_addr_pkt"
sm_idx = 0
genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+genWriteTransPktCode(gen_file_def, sm_idx)
+genTrgTransPktCode(gen_file_def, sm_idx)
+genReadAckPktCode(gen_file_def, sm_idx))
genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
#-------------------------------------------------------------------------
@@ -595,7 +640,16 @@ if __name__ == '__main__':
genPkt.addSubPkt(random.randint(0, 2048), 0, 0xc0, 0xd, 4, b"\0"*4)
genPkt.addSubPkt(random.randint(0, 2048), 0, 0xc0, 0xd, 4, b"\0"*4)
genPkt.gen("./generated/shin/bc_r_pkt.vh", 1)
gen_file_def = "bc_r_pkt"
sm_idx = 0
genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+genWriteTransPktCode(gen_file_def, sm_idx)
+genTrgTransPktCode(gen_file_def, sm_idx)
+genReadAckPktCode(gen_file_def, sm_idx))
genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
#-------------------------------------------------------------------------
@@ -614,7 +668,15 @@ if __name__ == '__main__':
data[i] = i + 1
genPkt.addSubPkt(random.randint(0, 2048), 0, 0x0800, 0xe, 32, data)
genPkt.gen("./generated/shin/bc_w_pkt.vh", 1)
gen_file_def = "bc_w_pkt"
sm_idx = 0
genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+genWriteTransPktCode(gen_file_def, sm_idx)
+genTrgTransPktCode(gen_file_def, sm_idx)
+genReadAckPktCode(gen_file_def, sm_idx))
genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)