diff --git a/tb/shinTest/ShinTopSpiTb.v b/tb/shinTest/ShinTopSpiTb.v
index 8de3a0e..60cb3c9 100644
--- a/tb/shinTest/ShinTopSpiTb.v
+++ b/tb/shinTest/ShinTopSpiTb.v
@@ -25,6 +25,8 @@ module ShinTopSpiTb(
 
     integer spidata_file;
     integer c_line;
+    integer _pos;
+    integer _len;
 
     wire [4:0] isSoftReset;
 
@@ -395,23 +397,73 @@ task spi_trans( input [15:0] saddress, input [7:0] scmd, input [12:0] slength,in
           $time/1000, ((sidx >= 5)? ((sidx >= 10)? (sidx - 10):(sidx - 5)):sidx), txBuf[1], txBuf[0], 
           ((txBuf[2] == 0)? "Write":" Read"), slength);
 
-      for (integer i=0; i<slength; i++) begin
-        if (scmd == 0) begin
-          $fwrite(spidata_file, "%02h ", txBuf[i + 3]); 
-        end else begin
-          $fwrite(spidata_file, "%02h ", rxBuf[i + 3]); 
+      if (    ((saddress == 16'h0800)
+          ||  (saddress == 16'h1000)
+          ||  (saddress == 16'h1800)
+          ||  (saddress == 16'h2000)
+          ||  (saddress == 16'h2800)
+          ||  (saddress == 16'h3000)
+          ||  (saddress == 16'h3800)
+          ||  (saddress == 16'h4000))
+          &&  ((sidx == 0) || (sidx == 5) || (sidx == 10))) begin
+        _pos = 3;
+        for (integer _k = 0; _k < 4; _k++) begin
+          if (scmd == 0) begin
+            $fwrite(spidata_file, "%02h ", txBuf[_k + _pos]); 
+          end else begin
+            $fwrite(spidata_file, "%02h ", rxBuf[_k + _pos]); 
+          end
+        end
+
+        $fwrite(spidata_file, "\n");
+        _pos = 4 + _pos;
+        for (; _pos < slength; ) begin
+          for (integer _k = 0; _k < 8; _k++) begin
+            if (scmd == 0) begin
+              $fwrite(spidata_file, "%02h ", txBuf[_k + _pos]); 
+              _len = txBuf[_pos + 5] + (txBuf[_pos + 4] & 8'h0f) * 256;
+            end else begin
+              $fwrite(spidata_file, "%02h ", rxBuf[_k + _pos]);
+              _len = rxBuf[_pos + 5] + (rxBuf[_pos + 4] & 8'h0f) * 256;
+            end
+          end
+
+          $fwrite(spidata_file, "\n{{ ");
+          _pos = _pos + 8;
+          for (integer _k = 0; _k < _len; _k++) begin
+            if (scmd == 0) begin
+              $fwrite(spidata_file, "%02h ", txBuf[_k + _pos]); 
+            end else begin
+              $fwrite(spidata_file, "%02h ", rxBuf[_k + _pos]); 
+            end
+            c_line = 0;
+            if ((_k + 2)%16 == 0) begin
+              $fwrite(spidata_file, "\n");
+              c_line = 1;
+            end
+          end
+          $fwrite(spidata_file, "}}\n");
+          _pos = _pos + _len;
+        end
+      end else begin
+        for (integer i=0; i<slength; i++) begin
+          if (scmd == 0) begin
+            $fwrite(spidata_file, "%02h ", txBuf[i + 3]); 
+          end else begin
+            $fwrite(spidata_file, "%02h ", rxBuf[i + 3]); 
+          end
+          c_line = 0;
+          if ((i+1)%16 == 0) begin
+            $fwrite(spidata_file, "\n");
+            c_line = 1;
+          end
+        end
+        
+        if (c_line == 0) begin
+          $fwrite(spidata_file, "\n");
         end
         c_line = 0;
-        if ((i+1)%16 == 0) begin
-          $fwrite(spidata_file, "\n");
-          c_line = 1;
-        end
       end
-      
-      if (c_line == 0) begin
-        $fwrite(spidata_file, "\n");
-      end
-      c_line = 0;
     end
   end
 
@@ -549,6 +601,7 @@ initial begin
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
     //无子报文
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_detect_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_detect_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
@@ -597,6 +650,7 @@ initial begin
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
     //子报文
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_set_addr_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_set_addr_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
@@ -644,14 +698,13 @@ initial begin
 
     $fdisplay(spidata_file, "--->>>嗅探");
     //设置SM1在写入0x3地址触发enq
-    //txBuf[0+3] = 8'h04;
-    //txBuf[1+3] = 8'h00;
+    
     `DEF_detect_pkt_sm(txBuf);
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
     //无子报文
-    //`include "detect_pkt.vh"
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_detect_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_detect_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
@@ -685,14 +738,12 @@ initial begin
 
     $fdisplay(spidata_file, "--->>>嗅探");
     //设置SM1在写入0x3地址触发enq
-    //txBuf[0+3] = 8'h04;
-    //txBuf[1+3] = 8'h00;
     `DEF_detect_pkt_sm(txBuf);
     spi_trans( (`MST_TX1_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX1_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
     //无子报文MST_TX1_LEN_ADDR
-    //`include "detect_pkt.vh"
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_detect_pkt(txBuf);
     spi_trans( (`MST_TX1_ADDR), (`SPI_WRITE), (`DEF_detect_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
@@ -736,6 +787,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_seq_0_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) ); //写入SM1
     //发布请求
@@ -756,6 +808,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_seq_1_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) ); //写入SM1
     //发布请求
@@ -817,6 +870,7 @@ initial begin
 
     `include "seq_2_pkt.vh"
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_seq_2_pkt_sm(txBuf);
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
@@ -842,6 +896,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_bc_r_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) ); //写入SM1
     //发布请求
@@ -864,6 +919,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_bc_w_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_w_pkt_len), (`IF_IDX(0)) ); //写入SM1
     //发布请求
@@ -897,6 +953,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_sync_pkt(txBuf);
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_sync_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
@@ -924,6 +981,7 @@ initial begin
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    $fdisplay(spidata_file, "<<发包：");
     `DEF_sync_sig_pkt(txBuf);
     //spi_trans( (16'h1000), (`SPI_WRITE), (8'h94), (`IF_IDX(0)) ); //写入SM1
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) ); //写入SM1