diff --git a/tb/shinTest/ShinTopSpiTb.v b/tb/shinTest/ShinTopSpiTb.v index 2322b82..deea31f 100644 --- a/tb/shinTest/ShinTopSpiTb.v +++ b/tb/shinTest/ShinTopSpiTb.v @@ -231,50 +231,8 @@ initial begin #240 reset <= 0; -`ifdef ENABLE_REG_RW_TEST - #1000000 -`endif - -`ifdef ENABLE_DET_TESTENABLE_SM1_SEND_TEST - #900000 -`endif - -`ifdef ENABLE_SET_ADDR_TEST - #900000 -`endif - -`ifdef ENABLE_SM1_SEND_TEST - #500000 -`endif - -`ifdef ENABLE_SMx_SEND_TEST - #1000000 -`endif - -`ifdef ENABLE_EXCHG_DATA_SEQ_TEST - `ifdef ENABLE_EXCHG_DATA_SEQ0_TEST - #3500000 - `endif - `ifdef ENABLE_EXCHG_DATA_SEQ1_TEST - #3500000 - `endif - `ifdef ENABLE_EXCHG_DATA_SEQ2_TEST - #6000000 - `endif - `ifdef ENABLE_EXCHG_DATA_BC_TEST - #2000000 - `endif -`endif -`ifdef ENABLE_SYNC_TEST - #3000000 - #500000 - #1000000 - #2000000 - //#10000000 -`endif - //#20000000 -#1000000 +#1000000000 $display("Time Out !!!"); $fclose(spidata_file); @@ -780,27 +738,6 @@ initial begin `include "sm1_pkt.vh" - //设置SM1在写入0x3地址触发enq - `DEF_sm1_pkt_sm(txBuf); - spi_trans( (`MST_TX1_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX1_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - - //无子报文MST_TX1_LEN_ADDR - $fdisplay(spidata_file, "<<发包："); - `DEF_sm1_pkt(txBuf); - spi_trans( (`MST_TX1_ADDR), (`SPI_WRITE), (`DEF_sm1_pkt_len), (`IF_IDX(0)) ); //写入SM1 - - //发布请求 - - //txBuf[0+3] = `MST_TX_TRIGGER(1); - txBuf[0+3] = 8'b01011; - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM1 接收SM1, 请求发送 - - @(posedge isResp) #5 begin end - - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX1_ADDR), (`SPI_READ), (`DEF_sm1_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 - _t_end = $time; $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000); end @@ -820,20 +757,6 @@ initial begin `include "sm2_pkt.vh" - `DEF_sm2_pkt_sm(txBuf); - spi_trans( (`MST_TX2_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX2_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - - $fdisplay(spidata_file, "<<发包："); - `DEF_sm2_pkt(txBuf); - spi_trans( (`MST_TX2_ADDR), (`SPI_WRITE), (`DEF_sm2_pkt_len), (`IF_IDX(0)) ); //写入SM1 - //发布请求 - txBuf[0+3] = `MST_TX_TRIGGER(2);//`MST_TX_TRG;//`MST_TX_TRIGGER(1); - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送 - @(posedge isResp) #5 begin end - - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX2_ADDR), (`SPI_READ), (`DEF_sm2_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 _t_end = $time; $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000); end @@ -848,21 +771,6 @@ initial begin `include "sm3_pkt.vh" - `DEF_sm3_pkt_sm(txBuf); - spi_trans( (`MST_TX3_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX3_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - - $fdisplay(spidata_file, "<<发包："); - `DEF_sm3_pkt(txBuf); - spi_trans( (`MST_TX3_ADDR), (`SPI_WRITE), (`DEF_sm3_pkt_len), (`IF_IDX(0)) ); //写入SM1 - //发布请求 - txBuf[0+3] = `MST_TX_TRIGGER(3);//`MST_TX_TRG;//`MST_TX_TRIGGER(1); - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送 - @(posedge isResp) #5 begin end - - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX3_ADDR), (`SPI_READ), (`DEF_sm3_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 - spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(1)) ); spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(2)) ); spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(3)) ); @@ -894,21 +802,7 @@ initial begin $fdisplay(spidata_file, "--->>>交换数据sm0~sm7"); `include "seq_0_pkt.vh" - //设置SM1在写入516 len触发enq - `DEF_seq_0_pkt_sm(txBuf); - spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - $fdisplay(spidata_file, "<<发包："); - `DEF_seq_0_pkt(txBuf); - spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) ); //写入SM1 - //发布请求 - txBuf[0+3] = `MST_TX_TRG; - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送 - @(posedge isResp) #5 begin end - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 - _t_end = $time; $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000); end @@ -922,21 +816,6 @@ initial begin $fdisplay(spidata_file, "\n--->>>交换数据写dev2_sm0/dev1_sm2/dev3_sm4/dev4_sm6"); `include "seq_1_pkt.vh" - `DEF_seq_1_pkt_sm(txBuf); - spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - - $fdisplay(spidata_file, "<<发包："); - `DEF_seq_1_pkt(txBuf); - spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) ); //写入SM1 - //发布请求 - txBuf[0+3] = `MST_TX_TRG; - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送 - @(posedge isResp) #5 begin end - - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 - spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) ); spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) ); spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) ); @@ -993,21 +872,6 @@ initial begin `include "seq_2_pkt.vh" - $fdisplay(spidata_file, "<<发包："); - `DEF_seq_2_pkt_sm(txBuf); - spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) ); - - `DEF_seq_2_pkt(txBuf); - spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_seq_2_pkt_len), (`IF_IDX(0)) ); //写入SM1 - //发布请求 - txBuf[0+3] = `MST_TX_TRG; - spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送 - @(posedge isResp) #5 begin end - - $fdisplay(spidata_file, ">>回包："); - spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_2_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出 - _t_end = $time; $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000); end @@ -1211,8 +1075,10 @@ initial begin spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2 */ - - + #2000000 + $display("Testcase Finished! Time Out !!!"); + $fclose(spidata_file); + $stop; end diff --git a/tb/shinTest/gen_pkt.py b/tb/shinTest/gen_pkt.py index d4875ca..5c4d8f9 100755 --- a/tb/shinTest/gen_pkt.py +++ b/tb/shinTest/gen_pkt.py @@ -238,7 +238,16 @@ if __name__ == '__main__': genPkt.addSubPkt(0x03, 0, 0xc0, 0x0, 64, None) #genPkt.addSubPkt(10, 2, 0x300, 0x2, 4, None) #genPkt.addSubPkt(11, 1, 0x300, 0x2, 4, None) - genPkt.gen("./generated/shin/sm1_pkt.vh", 1) + + gen_file_def = "sm1_pkt" + sm_idx = 1 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- @@ -251,7 +260,16 @@ if __name__ == '__main__': genPkt.addSubPkt(0x01, 0, 0x00, 0xd, 128, None) #genPkt.addSubPkt(10, 2, 0x300, 0x2, 4, None) #genPkt.addSubPkt(11, 1, 0x300, 0x2, 4, None) - genPkt.gen("./generated/shin/sm2_pkt.vh", 1) + + + gen_file_def = "sm2_pkt" + sm_idx = 2 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- @@ -270,7 +288,15 @@ if __name__ == '__main__': data[i] = i + 1 genPkt.addSubPkt(random.randint(0, 2048), 0, 0x0800, 0xe, 16, data) #0x1800, 0xe, 16, data) - genPkt.gen("./generated/shin/sm3_pkt.vh", 1) + gen_file_def = "sm3_pkt" + sm_idx = 3 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- @@ -288,7 +314,16 @@ if __name__ == '__main__': 56, None) #genPkt.addSubPkt(10, 2, 0x300, 0x2, 4, None) #genPkt.addSubPkt(11, 1, 0x300, 0x2, 4, None) - genPkt.gen("./generated/shin/seq_0_pkt.vh", 1) + + + gen_file_def = "seq_0_pkt" + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- #>>>>>>普通数据包0,用来操作sync @@ -348,7 +383,16 @@ if __name__ == '__main__': data[14] = ord('A') genPkt.addSubPkt(0x04, 0, 0x3800, 0x1, 64, data) - genPkt.gen("./generated/shin/seq_1_pkt.vh", 1) + + gen_file_def = "seq_1_pkt" + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- #>>>>>>普通数据包2 @@ -365,7 +409,15 @@ if __name__ == '__main__': genPkt.addSubPkt(3, 0, 0x0316, 0x0, 2, b"\0"*2) genPkt.addSubPkt(4, 0, 0x031e, 0x0, 2, b"\0"*2) - genPkt.gen("./generated/shin/seq_2_pkt.vh", 1) + gen_file_def = "seq_2_pkt" + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- #>>>>>>同步数据包 @@ -402,9 +454,19 @@ if __name__ == '__main__': data[37] = 0x00 genPkt.addSubPkt(random.randint(0, 2048), 0, 0x120, 0xe, 0x28, data) - - genPkt.gen("./generated/shin/sync_sig_pkt.vh", 1) + gen_file_def = "sync_sig_pkt" + ''' + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx)) + + ''' + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) #------------------------------------------------------------------------- @@ -465,6 +527,29 @@ if __name__ == '__main__': data[37] = 0x0 genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data) + + data = [0,] * 100 #bytearray(b"\0" * 100) + data[0] = 0x0f #地址0x120 + data[2] = 0xa + data[4] = 0xa + data[6] = 0xa + data[8] = 0xa + + data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点 + data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131 + data[18] = '''(_temp_time >> 16) & 8'hff''' + data[19] = '''(_temp_time >> 24) & 8'hff''' + + data[24] = 0x00 #地址0x138, sync周期 4B + data[25] = 0x02 #地址0x139 + + data[28] = 0x0 #sync1偏移 + data[29] = 0x0 + + data[36] = 0x0 #sync3偏移 + data[37] = 0x0 + + genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data) genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) +genWriteTransPktCode(gen_file_def, sm_idx)