diff --git a/tb/shinTest/ShinTopSpiTb.v b/tb/shinTest/ShinTopSpiTb.v
index b902a34..2a07323 100644
--- a/tb/shinTest/ShinTopSpiTb.v
+++ b/tb/shinTest/ShinTopSpiTb.v
@@ -637,6 +637,53 @@ initial begin
     spi_trans( (16'h70), (`SPI_READ), (14), (`IF_IDX(4)) );
   end
 
+  begin:CHECK_INTERRUPT_CFG_REG
+    $fdisplay(spidata_file, "\n\n测试用例：检查设备的INTERRUPT信号设置寄存器");
+
+    $fdisplay(spidata_file, "--->>>检查中断");
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(0)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(1)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(2)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(3)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(4)) );
+
+    $fdisplay(spidata_file, "--->>>设置中断");
+    txBuf[0+3] = 8'h00;
+    txBuf[1+3] = 8'h00;
+    txBuf[2+3] = 8'h00;
+    txBuf[3+3] = 8'h00;
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(0)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(1)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(2)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(3)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(4)) );
+
+    $fdisplay(spidata_file, "--->>>检查中断");
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(0)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(1)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(2)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(3)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(4)) );
+
+    $fdisplay(spidata_file, "--->>>设置中断");
+    txBuf[0+3] = 8'h0F;
+    txBuf[1+3] = 8'h00;
+    txBuf[2+3] = 8'h00;
+    txBuf[3+3] = 8'h00;
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(0)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(1)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(2)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(3)) );
+    spi_trans( (16'h70), (`SPI_WRITE), (4), (`IF_IDX(4)) );
+
+    $fdisplay(spidata_file, "--->>>检查中断");
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(0)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(1)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(2)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(3)) );
+    spi_trans( (16'h70), (`SPI_READ), (4), (`IF_IDX(4)) );
+  end
+
 `ifdef ENABLE_DET_TEST
 /*---------------------------------------------------------------------------------------------------------
 测试用例3