增加新的测试用例,操作SM

tb/shinTest/ShinTopSpiTb.v

@@ -21,9 +21,10 @@
 //`define ENABLE_SYNC_SIG1_TEST
 //`define ENABLE_RESET_TEST
 
-`define ENABLE_EBMMU_TC1_TEST
-`define ENABLE_EBMMU_TC2_TEST
-`define ENABLE_EBMMU_TC3_TEST
+//`define ENABLE_EBMMU_TC1_TEST
+//`define ENABLE_EBMMU_TC2_TEST
+//`define ENABLE_EBMMU_TC3_TEST
+`define ENABLE_EBMMU_TC4_TEST
 
 module ShinTopSpiTb(
 
@@ -1355,6 +1356,59 @@ initial begin
   end
 `endif
 
+`ifdef ENABLE_EBMMU_TC4_TEST
+  begin:EBMMU_TC4_TEST
+    _t_start = $realtime;
+    #1000
+    $fdisplay(spidata_file, "\n\n测试用例： ebmmu 测试用4");
+    $display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
+
+    txBuf[3] = 8'h80;
+    txBuf[4] = 8'h00;
+    spi_trans((16'h0306), (`SPI_WRITE), (2), (`IF_IDX(1)) );//dev1_sm1
+
+    txBuf[3] = 8'h98;
+    txBuf[4] = 8'h00;
+    spi_trans((16'h030e), (`SPI_WRITE), (2), (`IF_IDX(2)) );//dev2_sm3
+
+    txBuf[3] = 8'h81;
+    txBuf[4] = 8'h00;
+    spi_trans((16'h0316), (`SPI_WRITE), (2), (`IF_IDX(3)) );//dev2_sm3
+
+    txBuf[3] = 8'h8c;
+    txBuf[4] = 8'h00;
+    spi_trans((16'h031e), (`SPI_WRITE), (2), (`IF_IDX(4)) );//dev2_sm3
+    
+
+    for (integer i=0; i < 128; i++) begin
+      txBuf[i + 3] = i + 1;
+    end
+    spi_trans( (16'h1000), (`SPI_WRITE), (128), (`IF_IDX(1)) );
+
+    for (integer i=0; i < 152; i++) begin
+      txBuf[i + 3] = i + 2;
+    end
+    spi_trans( (16'h2000), (`SPI_WRITE), (152), (`IF_IDX(2)) );
+
+    for (integer i=0; i < 129; i++) begin
+      txBuf[i + 3] = i + 3;
+    end
+    spi_trans( (16'h3000), (`SPI_WRITE), (129), (`IF_IDX(3)) );
+
+    for (integer i=0; i < 140; i++) begin
+      txBuf[i + 3] = i + 4;
+    end
+    spi_trans( (16'h4000), (`SPI_WRITE), (140), (`IF_IDX(4)) );
+
+    `include "ebmmu_tc4_settings.vh"
+
+    `include "ebmmu_tc4_read.vh"
+
+    _t_end = $realtime;
+    $fdisplay(spidata_file, "该测试用例运行时间：%t\n", _t_end - _t_start);
+  end
+`endif
+
   #1000000
   $display("Testcase Finished! Time Out !!!");
   $fclose(spidata_file);

tb/shinTest/gen_pkt.py

@@ -1215,3 +1215,112 @@ if __name__ == '__main__':
                        +genReadAckPktCode(gen_file_def, sm_idx))
 
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+    #-------------------------------------------------------------------------
+    #>>>>>>设置EB-MMU
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [0,] * 30
+
+    data[0] = 0x58 #0x1e + 0xa
+    data[1] = 0x00
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x10
+
+    data[6] = 0x80
+    data[7] = 0x00
+
+    data[8] = 0x01
+    data[9] = 0x01
+
+    genPkt.addSubPkt(0x1, 0, 0x021e, 0x1, 10, data)
+
+
+    data = [0,] * 30
+    data[0] = 0x58 + 0x80
+    data[1] = 0x00
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x20
+
+    data[6] = 0x98
+    data[7] = 0x00
+
+    data[8] = 0x01
+    data[9] = 0x01
+    genPkt.addSubPkt(0x2, 0, 0x021e, 0x1, 10, data)
+
+
+    data = [0,] * 30
+
+    data[0] = 0x58 + 0x80 + 0x98
+    data[1] = 0x00
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x30
+
+    data[6] = 0x81
+    data[7] = 0x00
+
+    data[8] = 0x01
+    data[9] = 0x01
+    genPkt.addSubPkt(0x3, 0, 0x021e, 0x1, 10, data)
+
+    data = [0,] * 30
+
+    data[0] = 0x58 + 0x80 + 0x98 + 0x81
+    data[1] = 0x00
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x40
+
+    data[6] = 0x8c
+    data[7] = 0x00
+
+    data[8] = 0x01
+    data[9] = 0x01
+    genPkt.addSubPkt(0x4, 0, 0x021e, 0x1, 10, data)
+
+
+    gen_file_def = "ebmmu_tc4_settings"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+
+    #-------------------------------------------------------------------------
+    #>>>>>>用EB-MMU方式读取EB-MMU设置
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [0,] * 550
+
+    genPkt.addSubPkt(0x1000, 2, 0x0058, 0x0, 0x80+0x98+0x81+0x8c, data)
+
+    gen_file_def = "ebmmu_tc4_read"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+