增加新的ebmmu写测试用例

tb/shinTest/ShinTopSpiTb.v

@@ -27,6 +27,7 @@
 //`define ENABLE_EBMMU_TC4_TEST
 //`define ENABLE_EBMMU_TC5_TEST
 `define ENABLE_EBMMU_TC6_TEST
+`define ENABLE_EBMMU_TC7_TEST
 
 module ShinTopSpiTb(
 
@@ -1413,6 +1414,22 @@ initial begin
   end
 `endif
 
+`ifdef ENABLE_EBMMU_TC7_TEST
+  begin:EBMMU_TC7_TEST
+    _t_start = $realtime;
+    #1000
+    $fdisplay(spidata_file, "\n\n测试用例： ebmmu 测试用7");
+    $display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
+
+    `include "ebmmu_tc7_settings.vh"
+
+    `include "ebmmu_tc7_write.vh"
+
+    _t_end = $realtime;
+    $fdisplay(spidata_file, "该测试用例运行时间：%t\n", _t_end - _t_start);
+  end
+`endif
+
   #1000000
   $display("Testcase Finished! Time Out !!!");
   $fclose(spidata_file);

tb/shinTest/gen_pkt.py

@@ -1527,5 +1527,140 @@ if __name__ == '__main__':
 
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
 
+#--------------------------------------------------------------------------
+    #-------------------------------------------------------------------------
+    #>>>>>>设置EB-MMU,测试用例7
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    addr_off = 0x58 + 0x80 + 0x98 + 0x81 + 0x8c
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [0,] * 30
+
+    addr = addr_off + 0x0
+    #print(hex(addr))
+    data[0] = (addr & 0xff)
+    data[1] = (addr >> 8) & 0xff
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x08
+
+    data[6] = 0x80
+    data[7] = 0x00
+
+    data[8] = 0x03
+    data[9] = 0x01
+
+    genPkt.addSubPkt(0x1, 0, 0x0228, 0x1, 10, data)
+
+    data = [0,] * 30
+    addr = addr + 0x80
+    #print(hex(addr))
+    data[0] = (addr) & 0xff
+    data[1] = (addr >> 8) & 0xff
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x08
+
+    data[6] = 0x80
+    data[7] = 0x00
+
+    data[8] = 0x03
+    data[9] = 0x00
+    genPkt.addSubPkt(0x2, 0, 0x0228, 0x1, 10, data)
+
+
+    data = [0,] * 30
+    addr = addr + 0x80
+    #print(hex(addr))
+    data[0] = (addr) & 0xff
+    data[1] = (addr >> 8) & 0xff
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x08
+
+    data[6] = 0x80
+    data[7] = 0x00
+
+    data[8] = 0x03
+    data[9] = 0x01
+    genPkt.addSubPkt(0x3, 0, 0x0228, 0x1, 10, data)
+
+    data = [0,] * 30
+
+    addr = addr + 0x80
+    #print(hex(addr))
+    data[0] = (addr) & 0xff
+    data[1] = (addr >> 8) & 0xff
+    data[2] = 0x00
+    data[3] = 0x10
+
+    data[4] = 0x00
+    data[5] = 0x08
+
+    data[6] = 0x80
+    data[7] = 0x00
+
+    data[8] = 0x03
+    data[9] = 0x00
+    genPkt.addSubPkt(0x4, 0, 0x0228, 0x1, 10, data)
+
+    data = [0,] * 2
+    data[0] = 0x80
+    data[1] = 0x00
+    genPkt.addSubPkt(0x0, 0, 0x302, 0xe, 2, data)
+
+    gen_file_def = "ebmmu_tc7_settings"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+    #-------------------------------------------------------------------------
+    #>>>>>>用EB-MMU方式读取EB-MMU设置
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据   
+    data = [0,] * 0x80 * 4
+    for i in range(0x80 * 4):
+        if i < 0x80:
+            data[i] = i & 0xff
+        elif i < 0x80+0x80:
+            data[i] = (i + 2 - 0x80) & 0xff
+        elif i < 0x80+0x80+0x80:
+            data[i] = (i + 3 - 0x80 - 0x80) & 0xff
+        else:
+            data[i] = (i + 5 - 0x80 - 0x80 - 0x80) & 0xff
+
+    genPkt.addSubPkt(0x1000, 2, addr_off, 0x1, 0x80 * 4, data)
+
+    gen_file_def = "ebmmu_tc7_write"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+                       +genSlvSMReadData(1, 0, 0x80)
+                       +genSlvSMReadData(2, 0, 0x80)
+                       +genSlvSMReadData(3, 0, 0x80)
+                       +genSlvSMReadData(4, 0, 0x80))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+
+