diff --git a/tb/shinTest/ShinTopSpiTb.v b/tb/shinTest/ShinTopSpiTb.v
index 40b7dab..589c04b 100644
--- a/tb/shinTest/ShinTopSpiTb.v
+++ b/tb/shinTest/ShinTopSpiTb.v
@@ -49,6 +49,7 @@ module ShinTopSpiTb(
     integer _t_start;
     integer _t_end;
     reg [63:0] _temp_time;
+    reg _reset_deactive;
 
     wire [4:0] isSoftReset;
 
@@ -233,6 +234,8 @@ initial begin
   clk8x = 0;
 	reset = 0;
 
+  _reset_deactive = 1'b0;
+
   spi_csn  = ~15'b0;
 
 	#100
@@ -267,8 +270,13 @@ begin
 end
 
 
+always @(posedge reset) begin
+  _reset_deactive <= 1'b0;
+end
 
-
+always @(negedge reset) begin
+  _reset_deactive <= 1'b1;
+end
 
 
 
@@ -501,46 +509,54 @@ task spi_trans( input [15:0] saddress, input [7:0] scmd, input [12:0] slength,in
 
 endtask
 
-
 always @(posedge io_int_sig[0]) begin
-      $fdisplay(spidata_file, "MST  INT SETUP: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "MST  INT SETUP: %tns", $time / 1000);
 end
 
 always @(posedge io_int_sig[1]) begin
-      $fdisplay(spidata_file, "SLV0 INT SETUP: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV0 INT SETUP: %tns", $time / 1000);
 end
 
 always @(posedge io_int_sig[2]) begin
-      $fdisplay(spidata_file, "SLV1 INT SETUP: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV1 INT SETUP: %tns", $time / 1000);
 end
 
 always @(posedge io_int_sig[3]) begin
-      $fdisplay(spidata_file, "SLV2 INT SETUP: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV2 INT SETUP: %tns", $time / 1000);
 end
 
 always @(posedge io_int_sig[4]) begin
-      $fdisplay(spidata_file, "SLV3 INT SETUP: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV3 INT SETUP: %tns", $time / 1000);
 end
 
-
 always @(negedge io_int_sig[0]) begin
-      $fdisplay(spidata_file, "MST  INT CLEAR: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "MST  INT CLEAR: %tns", $time / 1000);
 end
 
 always @(negedge io_int_sig[1]) begin
-      $fdisplay(spidata_file, "SLV0 INT CLEAR: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV0 INT CLEAR: %tns", $time / 1000);
 end
 
 always @(negedge io_int_sig[2]) begin
-      $fdisplay(spidata_file, "SLV1 INT CLEAR: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV1 INT CLEAR: %tns", $time / 1000);
 end
 
 always @(negedge io_int_sig[3]) begin
-      $fdisplay(spidata_file, "SLV2 INT CLEAR: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV2 INT CLEAR: %tns", $time / 1000);
 end
 
 always @(negedge io_int_sig[4]) begin
-      $fdisplay(spidata_file, "SLV3 INT CLEAR: %tns", $time / 1000);
+  if (_reset_deactive == 1'b1)
+    $fdisplay(spidata_file, "SLV3 INT CLEAR: %tns", $time / 1000);
 end