增加了检测邻居的协议

tb/sw/src/halfLvdsMacSvr.c

@@ -13,21 +13,13 @@ uint8_t MST_RX_BUF[RX_BUF_NUM * RX_BUF_MAX_LEN] __attribute__((aligned(32)));
 extern const uint8_t int_svr_code[];
 uint32_t (*sys_call)(uint32_t no, ...);
 
-/*
+
-#define CDR_INT_TX0END          14U
+
-#define CDR_INT_TX1END          15U
+
-#define CDR_INT_RX0ERROR        16U
+static uint32_t HLM_slave_poll(void);
-#define CDR_INT_RX1ERROR        17U
+
-#define CDR_INT_RX0START        18U
-#define CDR_INT_RX1START        19U
-#define CDR_INT_RX0END          20U
-#define CDR_INT_RX1END          21U
-#define CDR_INT_TX0_FIFO_DEQ    22U
-#define CDR_INT_TX1_FIFO_DEQ    23U
-#define CDR_INT_RX0_FIFO_ENQ    24U
-#define CDR_INT_RX1_FIFO_ENQ    25U
-*/
 volatile uint32_t isr_flag[32] = {0};
+
 uint32_t HLM_poll(uint32_t mode)
 {
 	sys_call = (void *)int_svr_code;
@@ -40,7 +32,7 @@ uint32_t HLM_poll(uint32_t mode)
 
 	if (mode == WORKMODE_MASTER)
 	{
-		uint32_t tx_pkt_len = 256;
+		uint32_t tx_pkt_len = 1024;
 		uint32_t rx_pkt_len = 0;
 		uint32_t rx_start = 0;
 		uint32_t status;
@@ -118,11 +110,34 @@ uint32_t HLM_poll(uint32_t mode)
 	}
 	else if (mode == WORKMODE_SLAVE)
 	{
+		HLM_slave_poll();
+	}
+	else
+	{
+
+	}
+	return 0;
+}
+
+#define DETECT_DEVICE_PKT_LEN			4
+#define DETECT_DEVICE_PKT_TX_LEN		(DETECT_DEVICE_PKT_LEN + 4)
+#define MAGIC_NUM						0xa53fd1a0U
+uint32_t HLM_slave_poll(void)
+{
 	uint32_t rx_index = 0;
 	uint32_t tx_pkt_len;
 	uint32_t rx_pkt_len = 0;
-		uint32_t rx_start = 0;
+	
+	uint32_t down_rx_start = 0;
+	uint32_t detect_start = 0;
+
 	uint32_t status;
+	uint32_t is_terminal = 1;
+	
+	//填充检测下行设备的包
+	uint32_t detect_pkt = MAGIC_NUM;
+
+	int i;
 	
 	*rx0_rxTxPair = 1;
 	*rx0_rxTimerAim = 0; //240;
@@ -130,26 +145,27 @@ uint32_t HLM_poll(uint32_t mode)
 	*rx1_rxTimerAim = 0;
 	*plic_enable_0_31 = 0;
 
+
+
 	#ifdef __riscv_e
 	sys_call(SYS_SLAVE_WORK);
-		
 	#else
-		while(1)
+	
-		{
+	
-			status = *HLM_status;
+
-			if (status & HLM_RX0_VALID)
-			{
-				rx_start = 1;
-				break;
-			}
-		}
 
 	while (1)
 	{
+		if (is_terminal)
+		{//是终节点
 			status = *HLM_status;
+			if ((!down_rx_start) && (status & HLM_RX0_VALID))
+				down_rx_start = 1;
 
-			if (rx_start && (status & HLM_RX0_VALID))
+			for (i = 0; i < HLM_RX0_FIFO_LEFT(status); i++)
 			{
+				if (down_rx_start) // && (status & HLM_RX0_VALID))
+				{//处理上行接收
 					uint32_t data;
 					data = *rx0_rxFifo;
 					if (rx_index == 0)
@@ -162,22 +178,46 @@ uint32_t HLM_poll(uint32_t mode)
 					*tx1_txFifo = data;
 					if (rx_pkt_len <= (rx_index * 4))
 					{
-					rx_start = 0;
+						down_rx_start = 0;
 						break;
 					}
-			}
+					if ((rx_index & 0x1f) == 10)
-		}
+						detect_start = 1;
-		#endif
 				}
 				else
+					break;
+			}
+
+			if (detect_start)
 			{
+				*tx0_txLen  = DETECT_DEVICE_PKT_TX_LEN;
+				*tx0_txFifo = (DETECT_DEVICE_PKT_LEN << 20) | 1;
+				*tx0_txFifo = detect_pkt;
+				detect_start = 0;
+			}
+
+			if (status & HLM_RX1_VALID)
+			{
+				uint32_t data;
+				uint32_t num;
+				data = *rx1_rxFifo;
+				num  = *rx1_rxFifo;
+				if ((data & 0x1) && (num == MAGIC_NUM))
+				{
+					*rx1_softReset = 1;
+					*tx0_softReset = 1;
+				}
+			}
+		}
+		else
+		{//不是终节点
 
 		}
+	}
+
+	#endif
 }
 
 
 
 
-
-
-

tb/sw/src/halfLvdsMacSvr.h

@@ -3,10 +3,7 @@
 
 #include "stdint.h"
 
-
-
 uint32_t HLM_poll(uint32_t mode);
-uint32_t HLM_work_with_isr(uint32_t mode);
 
 #endif