ruige/eb001
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

合并eb_dev分支的测试用例

Browse Source
This commit is contained in:
bacon
2025-05-21 17:36:01 +08:00
parent 411f340eb0 296c080d53
commit 79cc8b634e
2 changed files with 221 additions and 115 deletions
Download Patch File Download Diff File Expand all files Collapse all files

223
tb/shinTest/ShinTopSpiTb.v
View File

@@ -426,7 +426,7 @@ endtask
`define IF_OSPI(idx) ((5) + (idx))
`define SPI_WRITE 8'h0
`define SPI_READ 8'h1
`define TEST_REG_RW
/*---------------------------------------------------------------------------------------------------------
测试用例1
@@ -434,12 +434,19 @@ endtask
initial begin
#1000
$fdisplay(spidata_file, "测试用例1-从IP中读取寄存器，上电后的寄存器期望值为0");
`ifdef TEST_REG_RW
/*---------------------------------------------------------------------------------------------------------
测试用例
1. 从IP中读取寄存器，上电后的寄存器期望值为0
---------------------------------------------------------------------------------------------------------*/
$fdisplay(spidata_file, "测试用例：从IP中读取寄存器，上电后的寄存器期望值为0");
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(0)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(1)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(2)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(3)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(4)) );
`endif
if ((`INTERFACE_IDX) == 5) begin
@@ -464,10 +471,11 @@ initial begin
/*---------------------------------------------------------------------------------------------------------
测试用例2
测试用例
1. 设置IP为主站或从站，并读取设置结果，期望：0主，1~4从
---------------------------------------------------------------------------------------------------------*/
//设置主站从站
$fdisplay(spidata_file, "\n\n测试用例2-设置IP为主站或从站，并读取设置结果，期望：0主，1~4从");
$fdisplay(spidata_file, "\n\n测试用例：设置IP为主站或从站，并读取设置结果，期望：0主，1~4从");
txBuf[0+3] = 8'h01;
spi_trans( (16'h00), (`SPI_WRITE), (1), (`IF_IDX(0)) );
@@ -492,14 +500,12 @@ initial begin
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(4)) );
/*---------------------------------------------------------------------------------------------------------
测试用例3
---------------------------------------------------------------------------------------------------------*/
//嗅探
#10000
$fdisplay(spidata_file, "\n\n测试用例3-发送嗅探包，需要在波形文件里检查");
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
@@ -509,24 +515,25 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
$fdisplay(spidata_file, "--->>>嗅探");
`include "detect_pkt.vh"
//设置SM1在写入0x4 len 触发enq
//设置SM0在读出0x4 len 触发deq
txBuf[0+3] = 8'h04;
txBuf[1+3] = 8'h00;
`DEF_detect_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
//无子报文
`include "detect_pkt.vh"
spi_trans( (16'h1000), (`SPI_WRITE), (4), (`IF_IDX(0)) ); //写入SM1
`DEF_detect_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_detect_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h01;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
rxBuf[0+3] = 0;
spi_trans( (16'h803), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
//rxBuf[0+3] = 0;
//spi_trans( (16'h803), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
@@ -543,9 +550,9 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
/*---------------------------------------------------------------------------------------------------------
测试用例4
测试用例
---------------------------------------------------------------------------------------------------------*/
$fdisplay(spidata_file, "\n\n测试用例4-设置顺序索引");
$fdisplay(spidata_file, "\n\n测试用例：设置顺序索引");
$display("index @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
@@ -558,32 +565,15 @@ initial begin
$fdisplay(spidata_file, "--->>>设置顺序地址");
//设置SM1在写入0xe len触发enq
txBuf[0+3] = 8'h0e;
txBuf[1+3] = 8'h00;
`include "set_addr_pkt.vh"
//长度
`DEF_set_addr_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
txBuf[0+3] = 8'h00;
txBuf[1+3] = 8'ha0;//heeader length 10
txBuf[2+3] = 8'h00;
txBuf[3+3] = 8'h00;
//子报文
//设置顺序地址
txBuf[4+3] = 8'h0; //设备索引
txBuf[5+3] = 8'h0; //设备索引、类型
txBuf[6+3] = $random; //地址
txBuf[7+3] = $random; //地址
txBuf[8+3] = 8'hd0; //命令d 负载长度2
txBuf[9+3] = 8'd02; //负载长度2
txBuf[10+3] = 8'h0; //工作计数0
txBuf[11+3] = 8'h0; //工作计数0
txBuf[12+3] = 8'h0; //负载
txBuf[13+3] = 8'h0; //负载
spi_trans( (16'h1000), (`SPI_WRITE), (14), (`IF_IDX(0)) ); //写入SM1
`DEF_set_addr_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_set_addr_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h01;
@@ -592,7 +582,6 @@ initial begin
rxBuf[0+3] = 0;
spi_trans( (16'h80D), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
@@ -605,8 +594,7 @@ initial begin
//读写
#50000
#50000
#1000
$fdisplay(spidata_file, "--->>>设置顺序地址后，检查顺序地址");
//spi_trans( (16'h0010), (`SPI_READ), (5), (`IF_IDX(0)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(1)) );
@@ -614,12 +602,13 @@ initial begin
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
/*---------------------------------------------------------------------------------------------------------
测试用例5
测试用例
---------------------------------------------------------------------------------------------------------*/
//嗅探
#10000
$fdisplay(spidata_file, "\n\n测试用例5-发送嗅探包，需要在波形文件里检查");
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
@@ -630,14 +619,16 @@ initial begin
$fdisplay(spidata_file, "--->>>嗅探");
//设置SM1在写入0x3地址触发enq
txBuf[0+3] = 8'h04;
txBuf[1+3] = 8'h00;
//txBuf[0+3] = 8'h04;
//txBuf[1+3] = 8'h00;
`DEF_detect_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
//无子报文
`include "detect_pkt.vh"
spi_trans( (16'h1000), (`SPI_WRITE), (4), (`IF_IDX(0)) ); //写入SM1
//`include "detect_pkt.vh"
`DEF_detect_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_detect_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h04;
@@ -652,9 +643,6 @@ initial begin
// 顺序索引
//#50000
#50000
#50000
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
@@ -662,23 +650,33 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
/*---------------------------------------------------------------------------------------------------------
测试用例6
测试用例
1. 交换数据sm0~sm7
2. 交换数据sm0~sm7
3. 交换数据sm0~sm7(中断、状态)
4. 交换数据sm0~sm7(R/W/RW, BR/BW/BRW)
4. 寄存器单读/写/读写，寄存器广播读/写/读写
5. 以上交换数据的错误形式
---------------------------------------------------------------------------------------------------------*/
#50000
#50000
$fdisplay(spidata_file, "\n\n测试用例6-交换数据");
#1000
$fdisplay(spidata_file, "\n\n测试用例：交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
$fdisplay(spidata_file, "--->>>交换数据sm0~sm7");
`include "seq_0_pkt.vh"
//设置SM1在写入516 len触发enq
txBuf[0+3] = 8'h04;
txBuf[1+3] = 8'h02;
//txBuf[0+3] = 8'h04;
//txBuf[1+3] = 8'h02;
`DEF_seq_0_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`include "seq_pkt.vh"
spi_trans( (16'h1000), (`SPI_WRITE), (516), (`IF_IDX(0)) ); //写入SM1
`DEF_seq_0_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h01;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@@ -687,39 +685,52 @@ initial begin
spi_trans( (16'ha03), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
/*---------------------------------------------------------------------------------------------------------
测试用例7
测试 同步(sync) 和 同步输出 (sync_out)
---------------------------------------------------------------------------------------------------------*/
// 同步
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
#90000
$display("sync @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n\n测试用例-测试同步(sync)和同步输出(sync_out)");
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
//设置SM1在写入 0x18 len触发enq
txBuf[0+3] = 8'h18;
txBuf[1+3] = 8'h00;
$fdisplay(spidata_file, "\n--->>>交换数据写dev2_sm0/dev1_sm2/dev3_sm4/dev4_sm6");
`include "seq_1_pkt.vh"
//txBuf[0+3] = 8'h54;
//txBuf[1+3] = 8'h01;
`DEF_seq_1_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`DEF_seq_1_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h01;
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
end
spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) );
spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) );
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
/*---------------------------------------------------------------------------------------------------------
测试用例
1. 测试 同步(sync) 和 同步输出 (sync_out)
---------------------------------------------------------------------------------------------------------*/
// 同步
#1000
$display("sync @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n\n测试用例：测试同步(sync)和同步输出(sync_out)");
begin
//设置SM1在写入 0x18 len触发enq
`include "sync_pkt.vh"
spi_trans( (16'h1000), (`SPI_WRITE), (24), (`IF_IDX(0)) ); //写入SM1
//txBuf[0+3] = 8'h18;
//txBuf[1+3] = 8'h00;
`DEF_sync_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`DEF_sync_pkt(txBuf);
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_sync_pkt_len), (`IF_IDX(0)) ); //写入SM1
//写入替换时间戳替换地址
txBuf[0+3] = 8'h0c;
@@ -733,22 +744,22 @@ initial begin
spi_trans( (16'h817), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
//清除替换时间戳替换地址
txBuf[0+3] = 8'h00;
txBuf[1+3] = 8'h00;
spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器
//设置SM1在写入52 len触发enq
txBuf[0+3] = 8'd52;
txBuf[1+3] = 8'h00;
`include "sync_sig_pkt.vh"
//txBuf[0+3] = 8'h94;
//txBuf[1+3] = 8'h00;
`DEF_sync_sig_pkt_sm(txBuf);
spi_trans( (16'h0302), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (16'h0306), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`include "sync_sig_pkt.vh"
spi_trans( (16'h1000), (`SPI_WRITE), (52), (`IF_IDX(0)) ); //写入SM1
`DEF_sync_sig_pkt(txBuf);
//spi_trans( (16'h1000), (`SPI_WRITE), (8'h94), (`IF_IDX(0)) ); //写入SM1
spi_trans( (16'h1000), (`SPI_WRITE), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'h01;
@@ -757,8 +768,20 @@ initial begin
spi_trans( (16'h833), (`SPI_READ), (1), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
//清脉冲
//spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(4)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(4)) );
#10000
//清脉冲
txBuf[0+3] = 0; //负载0x122 sync0脉冲宽度
txBuf[1+3] = 0; //负载0x123
txBuf[2+3] = 0; //负载0x124 sync1脉冲宽度
@@ -767,9 +790,13 @@ initial begin
txBuf[5+3] = 0; //负载0x127
txBuf[6+3] = 0; //负载0x128 sync3脉冲宽度
txBuf[7+3] = 0; //负载0x129
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(1)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
//复位系统
#50000
//复位系统
txBuf[0+3] = 8'h01;
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(0)) );//复位主站
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(3)) );//复位从站2