增加代码,测试看门狗0(主站+从站),测试看门狗17

tb/shinTest/gen_pkt.py

@@ -148,11 +148,14 @@ if __name__ == '__main__':
     #add_tc_2_runlist(watchdog.tc1())
     #add_tc_2_runlist(watchdog.tc2())
     #add_tc_2_runlist(watchdog.tc3())
-    add_tc_2_runlist(watchdog.tc4())
+    #add_tc_2_runlist(watchdog.tc4())
     #add_tc_2_runlist(watchdog.tc5())
     #add_tc_2_runlist(watchdog.tc6())
     #add_tc_2_runlist(watchdog.tc7())
     #add_tc_2_runlist(watchdog.tc8())
+    #add_tc_2_runlist(watchdog.tc9())
+    #add_tc_2_runlist(watchdog.tc10())
+    add_tc_2_runlist(watchdog.tc11())
 
     #add_tc_2_runlist(mac.tc1())
     #add_tc_2_runlist(mac.tc2())

tb/shinTest/testcase/watchdog.py

@@ -690,9 +690,532 @@ def tc5():
 def tc6():
     return watchdog_test_sm_lvds_rd_timeout(6, 4)
 
-
 def tc7():
     return watchdog_test_sm_if_wr_no_timeout(7, 3)
 
 def tc8():
-    return watchdog_test_sm_lvds_rd_no_timeout(8, 4)
+    return watchdog_test_sm_lvds_rd_no_timeout(8, 4)
+
+def tc9():
+    genPkt = GenPkt()
+
+    gen_file_def = "watchdog_tc09"
+    sm_idx = 0
+    
+    tc_des = (f"使能主站的看门狗0，看通讯的超时Watchdog是否超时。\\n"
+              "清除中断后，错误消失，出问题的设备恢复正常。"
+             )
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                        + genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        )
+    
+    data = [0, ] * 0x10
+    genPkt.addSubPkt(0, 0, 0x0, 0xd, 0x10, data)
+
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                      )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    data = 1 ##使能看门狗
+    data0 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    data = 960 ##看门狗的超时值
+    data1 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(0, 0x404, True, 4, data0)
+                        + genIFRwDataCode(0, 0x110, False, 4)
+                        #+ '''_temp_time = rxBuf[`ARRAY_IDX_OFF] + (rxBuf[`ARRAY_IDX_OFF+1] << 8) + (rxBuf[`ARRAY_IDX_OFF+2] << 16) + (rxBuf[`ARRAY_IDX_OFF+3] << 24);\n'''
+                        #+ '''_temp_time = _temp_time + 32'h100;\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+0] = (_temp_time & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+1] = ( (_temp_time >> 8) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+2] = ((_temp_time >> 16) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+3] = ((_temp_time >> 24) & 8'hff);\n'''
+                        #+ '''spi_trans( (16'h0408), (`SPI_WRITE), (4), (`IF_IDX(0)));\n\n'''
+
+                        + genIFRwDataCode(0, 0x408, True, 4, data1)
+                        + genIFRwDataCode(0, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(0, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x10, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap01"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       +genIFRwDataCode(0, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       #+genTcEndFrameCode(gen_file_def)
+                       )
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    data = 1 ##使能看门狗
+    data0 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    data = 960 ##看门狗的超时值
+    data1 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        #+ genIFRwDataCode(0, 0x404, True, 4, data0)
+                        #+ genIFRwDataCode(0, 0x110, False, 4)
+                        #+ '''_temp_time = rxBuf[`ARRAY_IDX_OFF] + (rxBuf[`ARRAY_IDX_OFF+1] << 8) + (rxBuf[`ARRAY_IDX_OFF+2] << 16) + (rxBuf[`ARRAY_IDX_OFF+3] << 24);\n'''
+                        #+ '''_temp_time = _temp_time + 32'h100;\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+0] = (_temp_time & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+1] = ( (_temp_time >> 8) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+2] = ((_temp_time >> 16) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+3] = ((_temp_time >> 24) & 8'hff);\n'''
+                        #+ '''spi_trans( (16'h0408), (`SPI_WRITE), (4), (`IF_IDX(0)));\n\n'''
+
+                        #+ genIFRwDataCode(0, 0x408, True, 4, data1)
+                        + genIFRwDataCode(0, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(0, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x20, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap02"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       +genIFRwDataCode(0, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(0, 0x400, False, 0x04)
+                       +genTcEndFrameCode(gen_file_def))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+    return gen_file_def
+
+
+
+def tc10():
+    genPkt = GenPkt()
+
+    gen_file_def = "watchdog_tc10"
+    sm_idx = 0
+    
+    tc_des = (f"使能从站的看门狗0，看通讯的超时Watchdog是否超时。\\n"
+              "清除中断后，错误消失，出问题的设备恢复正常。"
+             )
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                        + genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        )
+    
+    data = [0, ] * 0x10
+    genPkt.addSubPkt(0, 0, 0x0, 0xd, 0x10, data)
+
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                      )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    data = 1 ##使能看门狗
+    data0 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    data = 960 ##看门狗的超时值
+    data1 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x404, True, 4, data0)
+                        #+ genIFRwDataCode(1, 0x110, False, 4)
+                        #+ '''_temp_time = rxBuf[`ARRAY_IDX_OFF] + (rxBuf[`ARRAY_IDX_OFF+1] << 8) + (rxBuf[`ARRAY_IDX_OFF+2] << 16) + (rxBuf[`ARRAY_IDX_OFF+3] << 24);\n'''
+                        #+ '''_temp_time = _temp_time + 32'h100;\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+0] = (_temp_time & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+1] = ( (_temp_time >> 8) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+2] = ((_temp_time >> 16) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+3] = ((_temp_time >> 24) & 8'hff);\n'''
+                        #+ '''spi_trans( (16'h0408), (`SPI_WRITE), (4), (`IF_IDX(0)));\n\n'''
+
+                        + genIFRwDataCode(1, 0x408, True, 4, data1)
+                        + genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x10, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap01"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       #+genTcEndFrameCode(gen_file_def)
+                       )
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    data = 1 ##使能看门狗
+    data0 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    data = 960 ##看门狗的超时值
+    data1 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        #+ genIFRwDataCode(0, 0x404, True, 4, data0)
+                        #+ genIFRwDataCode(0, 0x110, False, 4)
+                        #+ '''_temp_time = rxBuf[`ARRAY_IDX_OFF] + (rxBuf[`ARRAY_IDX_OFF+1] << 8) + (rxBuf[`ARRAY_IDX_OFF+2] << 16) + (rxBuf[`ARRAY_IDX_OFF+3] << 24);\n'''
+                        #+ '''_temp_time = _temp_time + 32'h100;\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+0] = (_temp_time & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+1] = ( (_temp_time >> 8) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+2] = ((_temp_time >> 16) & 8'hff);\n'''
+                        #+ '''txBuf[`ARRAY_IDX_OFF+3] = ((_temp_time >> 24) & 8'hff);\n'''
+                        #+ '''spi_trans( (16'h0408), (`SPI_WRITE), (4), (`IF_IDX(0)));\n\n'''
+
+                        #+ genIFRwDataCode(0, 0x408, True, 4, data1)
+                        + genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x20, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap02"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genTcEndFrameCode(gen_file_def))
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+    return gen_file_def
+
+
+
+def tc11():
+    genPkt = GenPkt()
+
+    gen_file_def = "watchdog_tc11"
+    sm_idx = 0
+    
+    tc_des = (f"使能从站的看门狗17，看通讯的超时Watchdog是否超时。\\n"
+              "清除中断后，错误消失，出问题的设备恢复正常。"
+             )
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    data = 1 << 17 ##使能看门狗
+    data0 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    data = 12000 ##看门狗的超时值
+    data1 = [data&0xff, (data>>8)&0xff, (data>>16)&0xff, (data>>24)&0xff]
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                        + genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x404, True, 4, data0)
+                        + genIFRwDataCode(1, 0x44c, True, 4, data1)
+                        )
+    
+    data = [0, ] * 0x10
+    genPkt.addSubPkt(0, 0, 0x0, 0xd, 0x10, data)
+
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                      )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        
+                        + genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x10, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap01"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       #+genTcEndFrameCode(gen_file_def)
+                       )
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
+    #----------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    
+
+    genPkt.addBeforeExc(#genTcStartFrameCode(gen_file_def, tc_des)
+                        genIFRwDataCode(0, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        
+                        + genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                        + genIFRwDataCode(1, 0x400, False, 0x04))
+    #genPkt.addBeforeExc(  genIFRwDataCode(1, 0x078, True, 4, [0xff, 0xff, 0xff, 0xff]))
+
+    data = [0,] * 0x20
+    
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(1, 0, 0x0, 0xd, 0x10, data)
+
+    sm_idx = 0
+
+    gen_file_def_ap = gen_file_def + "_ap02"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+
+                       +genMessageCode("--检查中断寄存器")
+                       +genIFRwDataCode(0, 0x074, False, 0x04)
+                       +genIFRwDataCode(1, 0x074, False, 0x04)
+                       +genIFRwDataCode(2, 0x074, False, 0x04)
+                       +genIFRwDataCode(3, 0x074, False, 0x04)
+                       +genIFRwDataCode(4, 0x074, False, 0x04)
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#200000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genIFRwDataCode(1, 0x400, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genMessageCode("--延时后检查看门狗寄存器")
+                       +"#2000000\n"
+                       +genIFRwDataCode(1, 0x400, False, 0x04)
+                       +genTcEndFrameCode(gen_file_def)
+                       )
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
+    return gen_file_def