ruige/eb001
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

整理测试代码

Browse Source
This commit is contained in:
bacon
2025-05-27 12:49:55 +08:00
parent c1e1f2446a
commit 5c8e58449d
2 changed files with 344 additions and 252 deletions
Download Patch File Download Diff File Expand all files Collapse all files

441
tb/shinTest/ShinTopSpiTb.v
View File

@@ -3,13 +3,13 @@
`define ENABLE_REG_RW_TEST
`define ENABLE_DET_TEST
`define ENABLE_SET_ADDR_TEST
//`define ENABLE_SM1_SEND_TEST
//`define ENABLE_SMx_SEND_TEST
`define ENABLE_SM1_SEND_TEST
`define ENABLE_SMx_SEND_TEST
`define ENABLE_EXCHG_DATA_SEQ_TEST
//`define ENABLE_EXCHG_DATA_SEQ0_TEST
//`define ENABLE_EXCHG_DATA_SEQ1_TEST
//`define ENABLE_EXCHG_DATA_SEQ2_TEST
//`define ENABLE_EXCHG_DATA_BC_TEST
`define ENABLE_EXCHG_DATA_SEQ0_TEST
`define ENABLE_EXCHG_DATA_SEQ1_TEST
`define ENABLE_EXCHG_DATA_SEQ2_TEST
`define ENABLE_EXCHG_DATA_BC_TEST
`define ENABLE_SYNC_TEST
module ShinTopSpiTb(
@@ -578,36 +578,39 @@ initial begin
测试用例
1. 从IP中读取寄存器，上电后的寄存器期望值为0
---------------------------------------------------------------------------------------------------------*/
_t_start = $time;
$fdisplay(spidata_file, "测试用例：从IP中读取寄存器，上电后的寄存器期望值为0");
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(0)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(1)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(2)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(3)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
begin:READ_REG_TESTCASE
_t_start = $time;
$fdisplay(spidata_file, "测试用例：从IP中读取寄存器，上电后的寄存器期望值为0");
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(0)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(1)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(2)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(3)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
`endif
if ((`INTERFACE_IDX) == 5) begin
$fdisplay(spidata_file, "\n\n从内部QSPI配置使用外部的SPI接口访问EasyBus");
txBuf[0+3] = 8'h01;
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(0)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(1)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(2)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(3)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(4)) );
end else if ((`INTERFACE_IDX) == 10) begin
$fdisplay(spidata_file, "\n\n从内部QSPI配置使用外部的QSPI接口访问EasyBus");
txBuf[0+3] = 8'h02;
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(0)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(1)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(2)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(3)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(4)) );
end else begin
$fdisplay(spidata_file, "\n\n从内部QSPI接口访问EasyBus");
begin:SETTING_INTERFACE
if ((`INTERFACE_IDX) == 5) begin
$fdisplay(spidata_file, "\n\n从内部QSPI配置使用外部的SPI接口访问EasyBus");
txBuf[0+3] = 8'h01;
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(0)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(1)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(2)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(3)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(4)) );
end else if ((`INTERFACE_IDX) == 10) begin
$fdisplay(spidata_file, "\n\n从内部QSPI配置使用外部的QSPI接口访问EasyBus");
txBuf[0+3] = 8'h02;
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(0)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(1)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(2)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(3)) );
spi_trans( (16'h09), (`SPI_WRITE), (1), (`IF_IQSPI(4)) );
end else begin
$fdisplay(spidata_file, "\n\n从内部QSPI接口访问EasyBus");
end
end
@@ -615,40 +618,43 @@ initial begin
测试用例
1. 设置IP为主站或从站，并读取设置结果，期望：0主，1~4从
---------------------------------------------------------------------------------------------------------*/
//设置主站从站
$fdisplay(spidata_file, "\n\n测试用例：设置IP为主站或从站，并读取设置结果，期望：0主，1~4从");
txBuf[0+3] = 8'h01;
spi_trans( (16'h00), (`SPI_WRITE), (1), (`IF_IDX(0)) );
begin:SETTING_DEV_ROLE
//设置主站从站
$fdisplay(spidata_file, "\n\n测试用例：设置IP为主站或从站，并读取设置结果，期望：0主，1~4从");
txBuf[0+3] = 8'h01;
spi_trans( (16'h00), (`SPI_WRITE), (1), (`IF_IDX(0)) );
#1000
txBuf[0+3] = 8'h02;
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(1)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(2)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(3)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(4)) );
#1000
txBuf[0+3] = 8'h02;
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(1)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(2)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(3)) );
#1000
spi_trans( (16'h0), (`SPI_WRITE), (1), (`IF_IDX(4)) );
$fdisplay(spidata_file, "--->>>设置完毕，检查接口寄存器");
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(0)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(1)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(2)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(3)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(4)) );
$fdisplay(spidata_file, "--->>>设置完毕，检查接口寄存器");
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(0)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(1)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(2)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(3)) );
spi_trans( (16'h00), (`SPI_READ), (1), (`IF_IDX(4)) );
end
`ifdef ENABLE_DET_TEST
/*---------------------------------------------------------------------------------------------------------
测试用例3
---------------------------------------------------------------------------------------------------------*/
//嗅探
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
begin:DETECT_DEV_TESTCASE
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
@@ -678,30 +684,29 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_detect_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
// 顺序索引
//#50000
#1000
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
// 顺序索引
//#50000
#1000
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_SET_ADDR_TEST
/*---------------------------------------------------------------------------------------------------------
测试用例
---------------------------------------------------------------------------------------------------------*/
_t_start = $time;
$fdisplay(spidata_file, "\n\n测试用例：设置顺序索引");
$display("index @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin:SET_ADDR_TESTCASE
_t_start = $time;
$fdisplay(spidata_file, "\n\n测试用例：设置顺序索引");
$display("index @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
$fdisplay(spidata_file, "--->>>设置顺序地址前，检查顺序地址");
//spi_trans( (16'h0010), (`SPI_READ), (5), (`IF_IDX(0)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(1)) );
@@ -709,7 +714,6 @@ initial begin
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
$fdisplay(spidata_file, "--->>>设置顺序地址");
`include "set_addr_pkt.vh"
//长度
@@ -728,39 +732,38 @@ initial begin
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_set_addr_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
//测试
spi_trans( (16'hc0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(1)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(2)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(3)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(4)) );
//读写
#1000
$fdisplay(spidata_file, "--->>>设置顺序地址后，检查顺序地址");
//spi_trans( (16'h0010), (`SPI_READ), (5), (`IF_IDX(0)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
//测试
spi_trans( (16'hc0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(1)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(2)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(3)) );
spi_trans( (16'h0a), (`SPI_READ), (2), (`IF_IDX(4)) );
//读写
#1000
$fdisplay(spidata_file, "--->>>设置顺序地址后，检查顺序地址");
//spi_trans( (16'h0010), (`SPI_READ), (5), (`IF_IDX(0)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_DET_TEST
/*---------------------------------------------------------------------------------------------------------
测试用例
---------------------------------------------------------------------------------------------------------*/
//嗅探
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
begin:DETECT_DEV_TESTCASE_2
//嗅探
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
$fdisplay(spidata_file, "嗅探：使用SM0");
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
@@ -788,23 +791,22 @@ initial begin
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_detect_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
`endif
`ifdef ENABLE_SM1_SEND_TEST
_t_start = $time;
begin
begin:SM1_SEND_TESTCASE
_t_start = $time;
$fdisplay(spidata_file, "\n单读：使用SM1");
$fdisplay(spidata_file, "--->>>SM1：数据包");
@@ -830,16 +832,21 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX1_ADDR), (`SPI_READ), (`DEF_sm1_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_SMx_SEND_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:SM2_SEND_TESTCASE
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n广播读：使用SM2");
$fdisplay(spidata_file, "--->>>广播读");
@@ -853,17 +860,21 @@ initial begin
`DEF_sm2_pkt(txBuf);
spi_trans( (`MST_TX2_ADDR), (`SPI_WRITE), (`DEF_sm2_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'b10101;//`MST_TX_TRIGGER(3);//`MST_TX_TRG;//`MST_TX_TRIGGER(1);
txBuf[0+3] = `MST_TX_TRIGGER(2);//`MST_TX_TRG;//`MST_TX_TRIGGER(1);
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX2_ADDR), (`SPI_READ), (`DEF_sm2_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:SM3_SEND_TESTCASE
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n广播写：使用SM3");
$fdisplay(spidata_file, "--->>>SM3广播写");
@@ -877,21 +888,22 @@ initial begin
`DEF_sm3_pkt(txBuf);
spi_trans( (`MST_TX3_ADDR), (`SPI_WRITE), (`DEF_sm3_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = 8'b11111;//`MST_TX_TRIGGER(3);//`MST_TX_TRG;//`MST_TX_TRIGGER(1);
txBuf[0+3] = `MST_TX_TRIGGER(3);//`MST_TX_TRG;//`MST_TX_TRIGGER(1);
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX3_ADDR), (`SPI_READ), (`DEF_sm3_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ_TEST
@@ -903,14 +915,14 @@ initial begin
4. 交换数据sm0~sm7(R/W/RW, BR/BW/BRW)
4. 寄存器单读/写/读写，寄存器广播读/写/读写
5. 以上交换数据的错误形式
---------------------------------------------------------------------------------------------------------*/
$fdisplay(spidata_file, "\n\n测试用例：交换数据");
---------------------------------------------------------------------------------------------------------*/
`ifdef ENABLE_EXCHG_DATA_SEQ0_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:EXCHG_DATA_SEQ0_TESTCASE
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "--->>>交换数据sm0~sm7");
`include "seq_0_pkt.vh"
@@ -928,16 +940,17 @@ initial begin
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ1_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:EXCHG_DATA_SEQ1_TESTCASE
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n--->>>交换数据写dev2_sm0/dev1_sm2/dev3_sm4/dev4_sm6");
`include "seq_1_pkt.vh"
@@ -955,22 +968,22 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) );
spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) );
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) );
spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) );
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ2_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:EXCHG_DATA_SEQ2_TESTCASE
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n--->>>交换数据读dev1_sm1/dev2_sm3/dev3_sm5/dev4_sm7");
txBuf[3] = 8'h80;
@@ -1026,27 +1039,27 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_2_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
`endif
`endif
`ifdef ENABLE_EXCHG_DATA_BC_TEST
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：广播交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:EXCHG_DATA_BC_R_TESTCASE
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：广播交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n--->>>广播读");
`include "bc_r_pkt.vh"
`DEF_bc_r_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`ifdef ENABLE_EXCHG_DATA_BC_TEST
`endif
$fdisplay(spidata_file, "<<发包：");
`DEF_bc_r_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) ); //写入SM1
@@ -1057,12 +1070,18 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
begin:EXCHG_DATA_BC_W_TESTCASE
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n--->>>广播写");
`include "bc_w_pkt.vh"
@@ -1080,14 +1099,15 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_bc_w_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
@@ -1102,7 +1122,7 @@ initial begin
$display("sync @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
$fdisplay(spidata_file, "\n\n测试用例：测试同步(sync)和同步输出(sync_out)");
begin
begin:SYNC_TESTCASE
//设置SM1在写入 0x18 len触发enq
`include "sync_pkt.vh"
`DEF_sync_pkt_sm(txBuf);
@@ -1132,9 +1152,6 @@ initial begin
spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器
`include "sync_sig_pkt.vh"
`DEF_sync_sig_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
@@ -1153,8 +1170,6 @@ initial begin
((_temp_time >> 8) & 8'hff),
((_temp_time >> 16) & 8'hff));
*/
$fdisplay(spidata_file, "<<发包：");
`DEF_sync_sig_pkt(txBuf);
@@ -1171,31 +1186,36 @@ initial begin
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
//spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(1)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(2)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(3)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(4)) );
/*
#10000
//清脉冲
txBuf[0+3] = 0; //负载0x122 sync0脉冲宽度
txBuf[1+3] = 0; //负载0x123
txBuf[2+3] = 0; //负载0x124 sync1脉冲宽度
txBuf[3+3] = 0; //负载0x125
txBuf[4+3] = 0; //负载0x126 sync2脉冲宽度
txBuf[5+3] = 0; //负载0x127
txBuf[6+3] = 0; //负载0x128 sync3脉冲宽度
txBuf[7+3] = 0; //负载0x129
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(1)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
*/
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
end
//spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(1)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(2)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(3)) );
spi_trans( (16'h0100), (`SPI_READ), (16'h48), (`IF_IDX(4)) );
`endif
/*
#10000
//清脉冲
txBuf[0+3] = 0; //负载0x122 sync0脉冲宽度
txBuf[1+3] = 0; //负载0x123
txBuf[2+3] = 0; //负载0x124 sync1脉冲宽度
txBuf[3+3] = 0; //负载0x125
txBuf[4+3] = 0; //负载0x126 sync2脉冲宽度
txBuf[5+3] = 0; //负载0x127
txBuf[6+3] = 0; //负载0x128 sync3脉冲宽度
txBuf[7+3] = 0; //负载0x129
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(1)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
*/
/*
#50000
@@ -1205,9 +1225,8 @@ initial begin
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2
*/
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
end