增加reset的测试用例

tb/shinTest/ShinTopSpiTb.v

@@ -26,7 +26,7 @@
 //`define ENABLE_SYNC_TEST                  "generated/log/sync_tc.log"
 //`define ENABLE_SYNC_SIG0_TEST             "generated/log/sync_sig0_tc.log"
 //`define ENABLE_SYNC_SIG1_TEST             "generated/log/sync_sig1_tc.log"
-`define ENABLE_RESET_TEST                 "generated/log/reset_tc.log"
+//`define ENABLE_RESET_TEST                 "generated/log/reset_tc.log"
 
 //`define ENABLE_WD1_TEST                   "generated/log/wd1_tc.log"
 

tb/shinTest/gen_pkt.py

@@ -20,6 +20,7 @@ if __name__ == '__main__':
     base.tc6()
     base.tc7()
     base.tc8()
+    add_tc_2_runlist(base.tc9())
 
     broadcast.tc1()
     broadcast.tc2()

tb/shinTest/testcase/base.py

@@ -285,30 +285,121 @@ def tc9():
 
     gen_file_def = "base_tc09"
     sm_idx = 0
-    tc_des = "测试8个ebmmu全配置下运行，每两个ebmmu对应一个sm。每个ebmmu必须对齐、足长的写入，\\n" \
+    tc_des = "测试RESET，仅复位主站和2号设备；链路和网络被破坏；发送广播包只能到1,2；3,4收不到。\\n" \
-           + "对应的sm才能正常工作。两次写入数据，复位设备1的SM1，SM1状态复原，不能读取到有效的数据。\\n"\
+           + "通过嗅探包、设置顺序地址命令等重新建立网络。"
-           + "测试用例能成功运行完毕，除设备1的SM1，其余的SMx都能获得正确的数据。\\n\\n" \
+    
-           + "检查内容：ebmmu工作状态、回包工作计数、SMx的状态、中断状态、统计信息、相关时序"
-    #-------------------------------------------------------------------------
     #>>>>>>设置顺序地址
     genPkt.clean()
     genPkt.setPktType(0)
 
-    data = bytearray(b"\0" * 2)
+    reset_data = [0x01, 0x00, 0x66, 0x79]
-    data[0] = 0x3f
+    main_dev = [0x01, ]
-    data[1] = 0xff
+    slave_dev = [0x02, ]
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                       +genIFRwDataCode(0, 0x78, False, 4)
+                       +genIFRwDataCode(0, 0x40, True, 4, reset_data)
+                       +genIFRwDataCode(2, 0x40, True, 4, reset_data)
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +"\n#5000\n"
+                       +genIFRwDataCode(0, 0x00, True, 1, main_dev)
+                       +genIFRwDataCode(2, 0x00, True, 1, slave_dev)
+                       )
+
+
+    data = [0,] * 128
+
+
     #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    genPkt.addSubPkt(0x0, 0, random.randint(0, 65535), 0xb, 2, data)
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 128, data)
 
-
+    
-    gen_file_def = "set_addr_pkt"
     sm_idx = 0
 
+
     genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                        +genWriteTransPktCode(gen_file_def, sm_idx)
                        +genTrgTransPktCode(gen_file_def, sm_idx)
-                       +genReadAckPktCode(gen_file_def, sm_idx))
+                       +genReadAckPktCode(gen_file_def, sm_idx)
-    
+                      )
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
 
+    #------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(1)
+
+    genPkt.addBeforeExc(genIFRwDataCode(1, 0xc0, False, 4)
+                       +genIFRwDataCode(2, 0xc0, False, 4)
+                       +genIFRwDataCode(3, 0xc0, False, 4)
+                       +genIFRwDataCode(4, 0xc0, False, 4)
+                       )
+    
+    gen_file_def_ap = gen_file_def + "_rw01"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       #+genTcEndFrameCode(gen_file_def)
+                       +genIFRwDataCode(1, 0xc0, False, 4)
+                       +genIFRwDataCode(2, 0xc0, False, 4)
+                       +genIFRwDataCode(3, 0xc0, False, 4)
+                       +genIFRwDataCode(4, 0xc0, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+    #------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(0)
+    
+    gen_file_def_ap = gen_file_def + "_rw02"
+    sm_idx = 0
+
+    data = [0x3f, 0xff]
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xb, 2, data)
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       #+genTcEndFrameCode(gen_file_def)
+                       +genIFRwDataCode(1, 0xc0, False, 4)
+                       +genIFRwDataCode(2, 0xc0, False, 4)
+                       +genIFRwDataCode(3, 0xc0, False, 4)
+                       +genIFRwDataCode(4, 0xc0, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
+    #------------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(1)
+
+    genPkt.addBeforeExc(genIFRwDataCode(1, 0xc0, False, 4)
+                       +genIFRwDataCode(2, 0xc0, False, 4)
+                       +genIFRwDataCode(3, 0xc0, False, 4)
+                       +genIFRwDataCode(4, 0xc0, False, 4)
+                       )
+    
+    gen_file_def_ap = gen_file_def + "_rw03"
+    sm_idx = 0
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genIFRwDataCode(1, 0xc0, False, 4)
+                       +genIFRwDataCode(2, 0xc0, False, 4)
+                       +genIFRwDataCode(3, 0xc0, False, 4)
+                       +genIFRwDataCode(4, 0xc0, False, 4)
+                       +genTcEndFrameCode(gen_file_def)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+
     return gen_file_def