增加同步逻辑的测试代码

tb/shinTest/ShinTopSpiTb.v

@@ -9,8 +9,8 @@
   //`define ENABLE_EXCHG_DATA_SEQ0_TEST
   //`define ENABLE_EXCHG_DATA_SEQ1_TEST
   //`define ENABLE_EXCHG_DATA_SEQ2_TEST
-`define ENABLE_EXCHG_DATA_BC_TEST
+//`define ENABLE_EXCHG_DATA_BC_TEST
-//`define ENABLE_SYNC_TEST
+`define ENABLE_SYNC_TEST
 
 module ShinTopSpiTb(
 
@@ -40,6 +40,7 @@ module ShinTopSpiTb(
     integer _len;
     integer _t_start;
     integer _t_end;
+    reg [63:0] _temp_time;
 
     wire [4:0] isSoftReset;
 
@@ -262,6 +263,7 @@ initial begin
 `ifdef ENABLE_SYNC_TEST
     #3000000
   #500000
+  #10000000
 `endif
 
 //#20000000
@@ -1107,14 +1109,37 @@ initial begin
     
     spi_trans( (16'h25), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器
 
+
+
+
     `include "sync_sig_pkt.vh"
     `DEF_sync_sig_pkt_sm(txBuf);
     spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
     spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
 
+    spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));
+    _temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) +
+      (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);
+    /*
+    $fdisplay(spidata_file, "读取时间:%d\n", _temp_time);
+    */
+    _temp_time = _temp_time + 1500;
+    /*
+    $fdisplay(spidata_file, "读取时间:%2h %2h %2h\n", 
+      (_temp_time & 8'hff),
+      ((_temp_time >> 8) & 8'hff),
+      ((_temp_time >> 16) & 8'hff));
+    */
+    
+    
+
     $fdisplay(spidata_file, "<<发包：");
     `DEF_sync_sig_pkt(txBuf);
-    //spi_trans( (16'h1000), (`SPI_WRITE), (8'h94), (`IF_IDX(0)) ); //写入SM1
+    
+    txBuf[15] = (_temp_time & 8'hff);
+    txBuf[16] = (_temp_time >> 8) & 8'hff;
+    txBuf[17] = (_temp_time >> 16) & 8'hff;
+
     spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) ); //写入SM1
 
     //发布请求
@@ -1135,6 +1160,7 @@ initial begin
   spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(4)) );
   spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(4)) );
 
+
   #10000
   //清脉冲
   txBuf[0+3] = 0;  //负载0x122 sync0脉冲宽度
@@ -1150,11 +1176,13 @@ initial begin
   spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
   spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
 
+  /*
   #50000
   //复位系统
   txBuf[0+3] = 8'h01;
   spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(0)) );//复位主站
   spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2
+  */
 
   _t_end = $time;
   $fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);

tb/shinTest/gen_pkt.py

@@ -270,25 +270,23 @@ if __name__ == '__main__':
     genPkt.setPktType(0)
 
     #subPkt参数：索引、索引类型、地址、命令、长度、数据
-    data = bytearray(b"\0" * 0x28)
+    data = bytearray(b"\0" * 100)
     data[0] = 0xff  #地址0x120
     
     data[16] = 0x00 #地址0x130, sync同步点
-    data[17] = 0xf0 #地址0x131
+    data[17] = 0x80 #地址0x131
     #data[18] = 0x10
     
-    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[24] = 0x80 #地址0x138, sync周期 4B
-    data[25] = 0x20 #地址0x139
+    data[25] = 0x00 #地址0x139
     
-    data[28] = 0x0a #sync1偏移
+    data[28] = 0x01 #sync1偏移
     data[29] = 0x0
 
-    data[36] = 0x80  #sync3偏移
+    data[36] = 0x02 #sync3偏移
     data[37] = 0x00
     
-    genPkt.addSubPkt(0x2, 0, 0x120, 0x1, 0x28, data)
+    genPkt.addSubPkt(random.randint(0, 2048), 0, 0x120, 0xe, 0x28, data)
-    genPkt.addSubPkt(0x1, 0, 0x120, 0x1, 0x28, data)
-    genPkt.addSubPkt(0x4, 0, 0x120, 0x1, 0x28, data)
     
 
     genPkt.gen("./generated/shin/sync_sig_pkt.vh", 1)