diff --git a/tb/shinTest/testcase/sync.py b/tb/shinTest/testcase/sync.py index b18c192..30b2f63 100644 --- a/tb/shinTest/testcase/sync.py +++ b/tb/shinTest/testcase/sync.py @@ -9,7 +9,37 @@ def tc1(): tc_des = "发送时钟信息，完成后，从站的系统时间与主站时间完全同步。主站发送\\n" \ + "自己的时钟和系统延迟，从站利用该信息进行校准自己的时钟。需要在波形软件里确认。\\n" \ + "仅看通讯数据无法确定系统功能正常。" + #------------------------------------------------------------------------- + #>>>>>>广播包 + genPkt.clean() + genPkt.setPktType(0) + + #subPkt参数：索引、索引类型、地址、命令、长度、数据 + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0]) + + genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) + ) + + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx) + +genCheckInsertTimeCode() + + +genMessageCode("--清除中断") + +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + + ) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + #------------------------------------------------------------------------- #>>>>>>同步数据包 genPkt.clean() @@ -19,15 +49,15 @@ def tc1(): genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12) - genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) - +genEnableInsertTimeCode(0xa)) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)) sm_idx = 0 + gen_file_def_ap = gen_file_def + "_rw01" - genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) - +genWriteTransPktCode(gen_file_def, sm_idx) - +genTrgTransPktCode(gen_file_def, sm_idx) - +genReadAckPktCode(gen_file_def, sm_idx) + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) + +genWriteTransPktCode(gen_file_def_ap, sm_idx) + +genTrgTransPktCode(gen_file_def_ap, sm_idx) + +genReadAckPktCode(gen_file_def_ap, sm_idx) +genCheckInsertTimeCode() +genMessageCode("--读取中断") +genIFRwDataCode(0, 0x74, False, 4) @@ -52,7 +82,7 @@ def tc1(): +genTcEndFrameCode(gen_file_def)) #+genDisableInsertTimeCode()) - genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap) return gen_file_def @@ -64,13 +94,44 @@ def tc2(): tc_des = "配置Sync信号为电平触发，设置SYNC的同步周期，SYNC1、SYNC3的偏移。\\n" \ + "SYNC触发后，需要手动清除SYNC信号。" + + #------------------------------------------------------------------------- + #>>>>>>广播包 + genPkt.clean() + genPkt.setPktType(0) + + #subPkt参数：索引、索引类型、地址、命令、长度、数据 + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0]) + + + genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) + ) + + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx) + +genCheckInsertTimeCode() + + +genMessageCode("--清除中断") + +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + + ) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + #------------------------------------------------------------------------- #>>>>>>设置同步信号的数据包，在波形中确认定时的有效性 genPkt.clean() genPkt.setPktType(0) - genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) - +genEnableInsertTimeCode(0xa) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa) + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n''' + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n''' + '''_temp_time = _temp_time + 32'h2000;\n\n''') @@ -107,11 +168,12 @@ def tc2(): genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data) sm_idx = 0 + gen_file_def_ap = gen_file_def + "_rw01" - genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) - +genWriteTransPktCode(gen_file_def, sm_idx) - +genTrgTransPktCode(gen_file_def, sm_idx) - +genReadAckPktCode(gen_file_def, sm_idx) + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) + +genWriteTransPktCode(gen_file_def_ap, sm_idx) + +genTrgTransPktCode(gen_file_def_ap, sm_idx) + +genReadAckPktCode(gen_file_def_ap, sm_idx) +"\n#1000000\n" +genMessageCode("--读取中断") +genIFRwDataCode(0, 0x74, False, 4) @@ -137,7 +199,7 @@ def tc2(): ) - genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap) return gen_file_def @@ -150,15 +212,46 @@ def tc3(): tc_des = "SYNC信号采用脉冲触发，4个设备，3个周期；先用广播包发送公共周期；然后3，4设备单独指定周期。\\n" \ + "需要在波形文件里查看。" + #------------------------------------------------------------------------- - #>>>>>>设置同步信号的数据包2 + #>>>>>>广播包 + genPkt.clean() + genPkt.setPktType(0) + + #subPkt参数：索引、索引类型、地址、命令、长度、数据 + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0]) + + + genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) + ) + + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx) + +genCheckInsertTimeCode() + + +genMessageCode("--清除中断") + +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + + ) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + + #------------------------------------------------------------------------- + #>>>>>>设置同步信号的数据包 genPkt.clean() genPkt.setPktType(0) sm_idx = 3 - genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) - +genEnableInsertTimeCode(0xa, 1, 1) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa, 1, 1) + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n''' + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n''' + '''_temp_time = _temp_time + 32'h3000;\n\n''') @@ -233,11 +326,13 @@ def tc3(): data[37] = 0x0 genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data) + + gen_file_def_ap = gen_file_def + "_rw01" - genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) - +genWriteTransPktCode(gen_file_def, sm_idx) - +genTrgTransPktCode(gen_file_def, sm_idx) - +genReadAckPktCode(gen_file_def, sm_idx) + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) + +genWriteTransPktCode(gen_file_def_ap, sm_idx) + +genTrgTransPktCode(gen_file_def_ap, sm_idx) + +genReadAckPktCode(gen_file_def_ap, sm_idx) +"#500000" +genMessageCode("--读取中断") +genIFRwDataCode(0, 0x74, False, 4) @@ -261,7 +356,7 @@ def tc3(): +genIFRwDataCode(4, 0x74, False, 4) +genTcEndFrameCode(gen_file_def)) - genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap) return gen_file_def @@ -271,17 +366,49 @@ def tc4(): gen_file_def = "sync_tc04" sm_idx = 0 - tc_des = "SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，2设备单独指定周期。\\n" \ - + "需要在波形文件里查看具体的效果。" + tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" + "2设备单独指定周期。一段时间后，重新同步，期望不要打断sync信号的输出。需要在波形文件里查看具体的效果。" + ) + #------------------------------------------------------------------------- - #>>>>>>设置同步信号的数据包3 + #>>>>>>广播包 + genPkt.clean() + genPkt.setPktType(0) + + #subPkt参数：索引、索引类型、地址、命令、长度、数据 + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0]) + + + genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) + ) + + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx) + +genCheckInsertTimeCode() + + +genMessageCode("--清除中断") + +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + + ) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + + #------------------------------------------------------------------------- + #>>>>>>设置同步信号的数据包 genPkt.clean() genPkt.setPktType(0) sm_idx = 3 - genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) - +genEnableInsertTimeCode(0xa, 1, 1) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa) + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n''' + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n''' + '''_temp_time = _temp_time + 32'h3000;\n\n''') @@ -381,10 +508,11 @@ def tc4(): genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data) - genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) - +genWriteTransPktCode(gen_file_def, sm_idx) - +genTrgTransPktCode(gen_file_def, sm_idx) - +genReadAckPktCode(gen_file_def, sm_idx) + gen_file_def_ap = gen_file_def + "_rw01" + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) + +genWriteTransPktCode(gen_file_def_ap, sm_idx) + +genTrgTransPktCode(gen_file_def_ap, sm_idx) + +genReadAckPktCode(gen_file_def_ap, sm_idx) +genMessageCode("--读取中断") +genIFRwDataCode(0, 0x74, False, 4) @@ -408,24 +536,25 @@ def tc4(): +genIFRwDataCode(4, 0x74, False, 4) ) - genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap) #>>>>>>同步数据包 genPkt.clean() genPkt.setPktType(0) #subPkt参数：索引、索引类型、地址、命令、长度、数据 - genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10) - genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10) genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, [0, ] * 12) + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10) + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10) + - genPkt.addBeforeExc(genEnableInsertTimeCode(0xa + 18 + 18)) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18)) sm_idx = 0 - gen_file_def_ap = gen_file_def + "_rw01" + gen_file_def_ap = gen_file_def + "_rw02" genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) +genWriteTransPktCode(gen_file_def_ap, sm_idx) @@ -468,14 +597,44 @@ def tc5(): + "然后检查同步信号是否能正常工作。然后对设备4进行必要的恢复工作。通过嗅探包、设置顺序地址命令等重新建立网络。" + #------------------------------------------------------------------------- + #>>>>>>广播包 + genPkt.clean() + genPkt.setPktType(0) + + #subPkt参数：索引、索引类型、地址、命令、长度、数据 + genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0]) + + + genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) + ) + + sm_idx = 0 + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) + +genWriteTransPktCode(gen_file_def, sm_idx) + +genTrgTransPktCode(gen_file_def, sm_idx) + +genReadAckPktCode(gen_file_def, sm_idx) + +genCheckInsertTimeCode() + + +genMessageCode("--清除中断") + +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff]) + + ) + + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1) + #------------------------------------------------------------------------- #>>>>>>设置同步信号的数据包 genPkt.clean() genPkt.setPktType(0) sm_idx = 3 - genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des) - +genEnableInsertTimeCode(0xa, 1, 1) + genPkt.addBeforeExc(genEnableInsertTimeCode(0xa) + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n''' + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n''' + '''_temp_time = _temp_time + 32'h3000;\n\n''') @@ -575,10 +734,13 @@ def tc5(): genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data) - genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx) - +genWriteTransPktCode(gen_file_def, sm_idx) - +genTrgTransPktCode(gen_file_def, sm_idx) - +genReadAckPktCode(gen_file_def, sm_idx) + + gen_file_def_ap = gen_file_def + "_rw00" + + genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx) + +genWriteTransPktCode(gen_file_def_ap, sm_idx) + +genTrgTransPktCode(gen_file_def_ap, sm_idx) + +genReadAckPktCode(gen_file_def_ap, sm_idx) +genMessageCode("--读取中断") +genIFRwDataCode(0, 0x74, False, 4) @@ -602,7 +764,7 @@ def tc5(): +genIFRwDataCode(4, 0x74, False, 4) ) - genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1) + genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap) #>>>>>>设置顺序地址 @@ -612,8 +774,6 @@ def tc5(): reset_data = [0x01, 0x00, 0x66, 0x79] - main_dev = [0x01, ] - slave_dev = [0x02, ] genPkt.addBeforeExc("#50000\n" +genIFRwDataCode(0, 0x78, False, 4) @@ -625,8 +785,8 @@ def tc5(): #+genIFRwDataCode(2, 0x74, False, 4) #+genIFRwDataCode(0, 0x40, False, 4) #+genIFRwDataCode(2, 0x40, False, 4) - #+genIFRwDataCode(0, 0x00, True, 1, main_dev) - #+genIFRwDataCode(2, 0x00, True, 1, slave_dev) + #+genIFRwDataCode(0, 0x00, True, 1, [0x01, ]) + #+genIFRwDataCode(2, 0x00, True, 1, [0x02, ]) )