修正合并shintop软件中的错误

tb/shinTest/gen_pkt.py

@@ -182,6 +182,52 @@ class GenPkt(object):
                 f.write("txBuf[%d]=8'h%02X;\n"%(3 + _k, self.pkt_buf[_k]))
         f.close()
 
+
+
+def genWriteTransLenCode(gen_name, sm_idx):
+    return '''\n//写入发送长度\n'''\
+        + '''$fdisplay(spidata_file, "--写数据交换长度");\n'''\
+        + '''`DEF_%s_sm(txBuf);\n'''%(gen_name, )\
+        + '''spi_trans( (`MST_TX%d_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''%(sm_idx,)\
+        + '''spi_trans( (`MST_RX%d_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''%(sm_idx,)
+
+def genWriteTransPktCode(gen_name, sm_idx):
+    return '''\n$fdisplay(spidata_file, "<<发包：");\n'''\
+        + '''`DEF_%s(txBuf);\n'''%(gen_name, )\
+        + '''spi_trans( (`MST_TX%d_ADDR), (`SPI_WRITE), (`DEF_%s_len), (`IF_IDX(0)) );\n'''%(sm_idx, gen_name, )
+
+def genTrgTransPktCode(gen_name, sm_idx):
+    return '''\n//请求发送\n'''\
+        + '''$fdisplay(spidata_file, "--请求发送");\n'''\
+        + '''txBuf[0+3] = `MST_TX_TRIGGER(%d);\n'''%(sm_idx, )\
+        + '''spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );\n'''
+        
+def genReadAckPktCode(gen_name, sm_idx):
+    return '''\n//等待回包\n'''\
+        + '''@(posedge isResp) #5 begin end\n'''\
+        + '''$fdisplay(spidata_file, ">>回包：");\n'''\
+        + '''spi_trans( (`MST_RX%d_ADDR), (`SPI_READ), (`DEF_%s_len), (`IF_IDX(0)) );\n'''%(sm_idx, gen_name,)
+
+def genEnableInsertTimeCode(pos, enableTime=True, enableDelay=True):
+    data = pos & 0x3fff
+    if enableTime:
+        data = data | 0x8000
+    if enableDelay:
+        data = data | 0x4000
+    return '''//写入替换时间戳替换地址\n'''\
+        + '''$fdisplay(spidata_file, "--增加时间戳插入");\n'''\
+        + '''txBuf[0+3] = 8'h%x;\n'''%(data & 0xff, )\
+        + '''txBuf[1+3] = 8'h%x;\n'''%((data >> 8) & 0xff, )\
+        + '''spi_trans( (16'h24), (`SPI_WRITE), (2), (`IF_IDX(0)) );\n'''
+
+def genDisableInsertTimeCode():
+    return '''\n//清除替换时间戳替换地址\n'''\
+        + '''$fdisplay(spidata_file, "--清除时间戳插入");\n'''\
+        + '''txBuf[0+3] = 8'h00;\n'''\
+        + '''txBuf[1+3] = 8'h00;\n'''\
+        + '''spi_trans( (16'h24), (`SPI_WRITE), (2), (`IF_IDX(0)) ); //清除替换时间戳替换地址寄存器\n'''
+
+
 if __name__ == '__main__':
     genPkt = GenPkt()
 
@@ -318,6 +364,7 @@ if __name__ == '__main__':
     data[14] = 64
     data[15] = 0
 
+
     #subPkt参数：索引、索引类型、地址、命令、长度、数据
     genPkt.addSubPkt(0x02, 0, 0x0300, 0x1, 4, data) #sm0
     genPkt.addSubPkt(0x01, 0, 0x0308, 0x1, 4, data) #sm2