ruige/eb001
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

增加新的测试用例,用来测试主站的其他SMx

Browse Source
This commit is contained in:
bacon
2025-05-23 18:48:21 +08:00
parent 15596ce478
commit 0b9f119bc4
2 changed files with 166 additions and 62 deletions
Download Patch File Download Diff File Expand all files Collapse all files

202
tb/shinTest/ShinTopSpiTb.v
View File

@@ -1,14 +1,15 @@
`timescale 1 ns / 1 ps
//`define ENABLE_REG_RW_TEST
`define ENABLE_REG_RW_TEST
`define ENABLE_DET_TEST
`define ENABLE_SET_ADDR_TEST
//`define ENABLE_SM1_SEND_TEST
//`define ENABLE_SMx_SEND_TEST
`define ENABLE_EXCHG_DATA_SEQ_TEST
//`define ENABLE_EXCHG_DATA_SEQ0_TEST
//`define ENABLE_EXCHG_DATA_SEQ1_TEST
//`define ENABLE_EXCHG_DATA_SEQ2_TEST
`define ENABLE_EXCHG_DATA_BC_TEST
`define ENABLE_EXCHG_DATA_BC_TEST
//`define ENABLE_SYNC_TEST
module ShinTopSpiTb(
@@ -37,6 +38,8 @@ module ShinTopSpiTb(
integer c_line;
integer _pos;
integer _len;
integer _t_start;
integer _t_end;
wire [4:0] isSoftReset;
@@ -223,31 +226,46 @@ initial begin
reset <= 0;
`ifdef ENABLE_REG_RW_TEST
#1000000
`endif
`ifdef ENABLE_DET_TESTENABLE_SM1_SEND_TEST
#900000
`endif
`ifdef ENABLE_DET_TEST
`endif
`ifdef ENABLE_SET_ADDR_TEST
#900000
`endif
`ifdef ENABLE_SM1_SEND_TEST
#500000
`endif
`ifdef ENABLE_SMx_SEND_TEST
#1000000
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ_TEST
`ifdef ENABLE_EXCHG_DATA_SEQ0_TEST
#3500000
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ1_TEST
#3500000
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ2_TEST
#6000000
`endif
`ifdef ENABLE_EXCHG_DATA_BC_TEST
#2000000
`endif
`endif
`ifdef ENABLE_SYNC_TEST
#3000000
#500000
`endif
//#20000000
#5000000
#1000000
$display("Time Out !!!");
$fclose(spidata_file);
@@ -552,12 +570,15 @@ initial begin
测试用例
1. 从IP中读取寄存器，上电后的寄存器期望值为0
---------------------------------------------------------------------------------------------------------*/
_t_start = $time;
$fdisplay(spidata_file, "测试用例：从IP中读取寄存器，上电后的寄存器期望值为0");
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(0)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(1)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(2)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(3)) );
spi_trans( (16'h00), (`SPI_READ), (64), (`IF_IQSPI(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
@@ -615,9 +636,9 @@ initial begin
/*---------------------------------------------------------------------------------------------------------
测试用例3
---------------------------------------------------------------------------------------------------------*/
//嗅探
#10000
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
@@ -650,23 +671,25 @@ initial begin
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_detect_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
`endif
// 顺序索引
//#50000
#50000
#50000
#1000
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_SET_ADDR_TEST
/*---------------------------------------------------------------------------------------------------------
测试用例
---------------------------------------------------------------------------------------------------------*/
_t_start = $time;
$fdisplay(spidata_file, "\n\n测试用例：设置顺序索引");
$display("index @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
@@ -716,6 +739,9 @@ initial begin
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0000), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_DET_TEST
@@ -723,6 +749,7 @@ initial begin
测试用例
---------------------------------------------------------------------------------------------------------*/
//嗅探
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：发送嗅探包，需要在波形文件里检查");
begin
@@ -762,18 +789,21 @@ initial begin
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_SM1_SEND_TEST
_t_start = $time;
begin
$fdisplay(spidata_file, "嗅探：使用SM1");
$fdisplay(spidata_file, "\n嗅探：使用SM1");
$fdisplay(spidata_file, "--->>>嗅探前，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(4)) );
$fdisplay(spidata_file, "--->>>嗅探");
//设置SM1在写入0x3地址触发enq
@@ -795,16 +825,49 @@ initial begin
spi_trans( (`MST_RX1_ADDR), (`SPI_READ), (`DEF_detect_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
// 顺序索引
$fdisplay(spidata_file, "--->>>嗅探后，检查链路状态寄存器");
//spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (6), (`IF_IDX(4)) );
//spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(0)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(1)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(2)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(3)) );
spi_trans( (16'h00c0), (`SPI_READ), (4), (`IF_IDX(4)) );
`endif
`ifdef ENABLE_SMx_SEND_TEST
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
$fdisplay(spidata_file, "\n广播写：使用SM3");
$fdisplay(spidata_file, "--->>>SM3广播写");
`include "sm3_pkt.vh"
`DEF_sm3_pkt_sm(txBuf);
spi_trans( (`MST_TX3_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX3_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
$fdisplay(spidata_file, "<<发包：");
`DEF_sm3_pkt(txBuf);
spi_trans( (`MST_TX3_ADDR), (`SPI_WRITE), (`DEF_sm3_pkt_len), (`IF_IDX(0)) ); //写入SM1
//发布请求
txBuf[0+3] = `MST_TX_TRIGGER(3);//`MST_TX_TRG;//`MST_TX_TRIGGER(1);
spi_trans( (16'h20), (`SPI_WRITE), (1), (`IF_IDX(0)) );//发送SM0 接收SM0, 请求发送
@(posedge isResp) #5 begin end
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX3_ADDR), (`SPI_READ), (`DEF_sm3_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (16), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ_TEST
/*---------------------------------------------------------------------------------------------------------
@@ -818,6 +881,7 @@ initial begin
---------------------------------------------------------------------------------------------------------*/
$fdisplay(spidata_file, "\n\n测试用例：交换数据");
`ifdef ENABLE_EXCHG_DATA_SEQ0_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
@@ -840,9 +904,12 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_0_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ1_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
@@ -865,13 +932,17 @@ initial begin
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_1_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) );
spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) );
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
spi_trans( (16'h1800), (`SPI_READ), (64), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (64), (`IF_IDX(2)) );
spi_trans( (16'h2800), (`SPI_READ), (64), (`IF_IDX(3)) );
spi_trans( (16'h3800), (`SPI_READ), (64), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`ifdef ENABLE_EXCHG_DATA_SEQ2_TEST
_t_start = $time;
#1000
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
begin
@@ -931,10 +1002,14 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_seq_2_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
`endif
`ifdef ENABLE_EXCHG_DATA_BC_TEST
_t_start = $time;
#1000
$fdisplay(spidata_file, "\n\n测试用例：广播交换数据");
$display("read&write @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
@@ -945,7 +1020,8 @@ initial begin
`DEF_bc_r_pkt_sm(txBuf);
spi_trans( (`MST_TX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
spi_trans( (`MST_RX_LEN_ADDR), (`SPI_WRITE), (2), (`IF_IDX(0)) );
`ifdef ENABLE_EXCHG_DATA_BC_TEST
`endif
$fdisplay(spidata_file, "<<发包：");
`DEF_bc_r_pkt(txBuf);
spi_trans( (`MST_TX_ADDR), (`SPI_WRITE), (`DEF_bc_r_pkt_len), (`IF_IDX(0)) ); //写入SM1
@@ -980,10 +1056,13 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_bc_w_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(4)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0800), (`SPI_READ), (32), (`IF_IDX(4)) );
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
@@ -993,6 +1072,7 @@ initial begin
1. 测试 同步(sync) 和 同步输出 (sync_out)
---------------------------------------------------------------------------------------------------------*/
// 同步
_t_start = $time;
#1000
$display("sync @ %d", s_ShinTop_Mst.interface__io_cReg_timeStamp);
@@ -1044,38 +1124,40 @@ initial begin
$fdisplay(spidata_file, ">>回包：");
spi_trans( (`MST_RX_ADDR), (`SPI_READ), (`DEF_sync_sig_pkt_len), (`IF_IDX(0)) );//读一下SM0的切换地址，将fifo弹出
end
//spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(4)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(4)) );
//spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(0)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(1)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(2)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(3)) );
spi_trans( (16'h0100), (`SPI_READ), (32), (`IF_IDX(4)) );
spi_trans( (16'h0130), (`SPI_READ), (32), (`IF_IDX(4)) );
#10000
//清脉冲
txBuf[0+3] = 0; //负载0x122 sync0脉冲宽度
txBuf[1+3] = 0; //负载0x123
txBuf[2+3] = 0; //负载0x124 sync1脉冲宽度
txBuf[3+3] = 0; //负载0x125
txBuf[4+3] = 0; //负载0x126 sync2脉冲宽度
txBuf[5+3] = 0; //负载0x127
txBuf[6+3] = 0; //负载0x128 sync3脉冲宽度
txBuf[7+3] = 0; //负载0x129
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(1)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
#10000
//清脉冲
txBuf[0+3] = 0; //负载0x122 sync0脉冲宽度
txBuf[1+3] = 0; //负载0x123
txBuf[2+3] = 0; //负载0x124 sync1脉冲宽度
txBuf[3+3] = 0; //负载0x125
txBuf[4+3] = 0; //负载0x126 sync2脉冲宽度
txBuf[5+3] = 0; //负载0x127
txBuf[6+3] = 0; //负载0x128 sync3脉冲宽度
txBuf[7+3] = 0; //负载0x129
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(1)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(2)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(3)) ); //slv2
spi_trans( (16'h0122), (`SPI_WRITE), (8), (`IF_IDX(4)) ); //slv2
#50000
//复位系统
txBuf[0+3] = 8'h01;
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(0)) );//复位主站
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2
#50000
//复位系统
txBuf[0+3] = 8'h01;
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(0)) );//复位主站
spi_trans( (16'h40), (`SPI_WRITE), (1), (`IF_IDX(1)) );//复位从站2
_t_end = $time;
$fdisplay(spidata_file, "该测试用例运行时间：%2tns", (_t_end - _t_start) / 1000);
`endif
end