Merge branch 'mp_eb_dev' into new_spi

src/main/scala/backBoard/shin/SlaveParser.scala

@@ -945,8 +945,8 @@ trait SlaveParserSync{ this: SlaveParserBase =>
       (  isDownRecPing & downSubMsgHeadInfo(0).devIndex === 0.U & downSubMsgHeadInfo(0).operator === SUBMSG_OPERATOR_SYNCA ) |
       ( ~isDownRecPing & downSubMsgHeadInfo(1).devIndex === 0.U & downSubMsgHeadInfo(1).operator === SUBMSG_OPERATOR_SYNCA )
     ){
-      addr64_op1 := deltaFinal //组合逻辑
+      addr64_op1 := deltaFinalPre //组合逻辑
-      addr64_op2 := subOp2(deltaFinalPre) //组合逻辑
+      addr64_op2 := subOp2(deltaFinal) //组合逻辑
       addrConflict(4) := true.B //组合逻辑
       deltaFinal := MuxCase( deltaFinalPre, Seq( //时序逻辑
         ( addr64_res.asSInt < -10.S ) -> ( deltaFinal - 10.U ),

tb/shinTest/gen_pkt.py

@@ -62,9 +62,11 @@ if __name__ == '__main__':
     add_tc_2_runlist(errorPkt.tc38())
     #'''
     
+    '''
     add_tc_2_runlist(rwregs.tc1())
-    #add_tc_2_runlist(rwregs.tc2())
+    add_tc_2_runlist(rwregs.tc2())
     add_tc_2_runlist(rwregs.tc3())
+    #'''
     
     '''
     add_tc_2_runlist(base.tc1())
@@ -115,6 +117,7 @@ if __name__ == '__main__':
     add_tc_2_runlist(sync.tc6())
     add_tc_2_runlist(sync.tc7())
     #'''
+    add_tc_2_runlist(sync.tc8())
 
     '''
     add_tc_2_runlist(ebmmu.tc1())

tb/shinTest/pyutils/GenPkt.py

@@ -49,7 +49,7 @@ class GenPkt(object):
         if not (ptype in [0, 2]):
             print('Error, bad subpkt type:', ptype)
             return 
-        if not (cmd in [0, 1, 2, 0xb, 0xc, 0xd, 0xe, 0xf]):
+        if not (cmd in [0, 1, 2, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf]):
             print('Error, bad cmd:', cmd)
             return 
         

tb/shinTest/testcase/sync.py

@@ -1551,3 +1551,573 @@ def tc7():
 
     
     return gen_file_def
+
+
+def tc8():
+    genPkt = GenPkt()
+
+    gen_file_def = "sync_tc08"
+    sm_idx = 0
+    tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" 
+             "2设备单独指定周期。该同步数据之前没有补广播包。如果紧跟嗅探包而不是普通包之后，可能会影响同步。\\n"
+             "期望是无论前面发送得是什么包，都不会影响同步的效果。一段时间后，重新同步，期望不要打断sync\\n"
+             "信号的输出。需要在波形文件里查看具体的效果。"
+            )
+
+
+    #-------------------------------------------------------------------------
+    #>>>>>>设置同步信号的数据包
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 3
+    
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                        +genEnableInsertTimeCode(0xa)
+        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
+        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
+        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
+    
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)
+    genPkt.addSubPkt(0, 0, 0x18, 0xe, 2, [0x1, 0x58])
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x80 #地址0x138, sync周期 4B
+    data[25] = 0x00 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0#sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
+    
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x01 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x02 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
+    genPkt.addSubPkt(0, 0, 0x18, 0xe, 2, [0x0, 0x58])
+    
+    #gen_file_def_ap = gen_file_def + "_rw01"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)
+
+    #>>>>>>同步数据包
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xa, 12, [0, ] * 12)
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+
+    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))
+
+    sm_idx = 0
+    
+    gen_file_def_ap = gen_file_def + "_rw02"
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genCheckInsertTimeCode()
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       
+                       +"#50000"
+                       +genIFRwDataCode(0, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                       
+                       +"#50000"
+                       +genIFRwDataCode(1, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                       ) #+genDisableInsertTimeCode())
+
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+    
+    genPkt.clean()
+    genPkt.setPktType(1)
+    sm_idx = 1
+    
+    genPkt.addBeforeExc("\n#5000\n"
+                       +genIFRwDataCode(0, 0x09, True, 1, [0, ], False, iface=1)
+                       +using_proper_transcode(0)
+                       
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(0, 0x00, True, 1, [0x1, ])
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       
+                       +genIFRwDataCode(1, 0x09, True, 1, [0, ], False, iface=1)
+                       +using_proper_transcode(1)                       
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x00, True, 1, [0x2, ])
+                       
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       )
+    
+    gen_file_def_ap = gen_file_def + "_rw03"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+    
+    
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 1
+    
+    genPkt.addSubPkt(0x0, 0, 0, 0xb, 2, [0x3f, 0xff])
+
+    
+    gen_file_def_ap = gen_file_def + "_rw04"
+    
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+    
+    
+    
+    
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 1
+    
+    genPkt.addBeforeExc("\n#5000\n"
+                       +genIFRwDataCode(0, 0x09, True, 1, [0, ], False, iface=1)
+                       +using_proper_transcode(0)
+                       
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       #+genIFRwDataCode(0, 0x40, False, 4)
+                       +genIFRwDataCode(0, 0x00, True, 1, [0x1, ])
+                        )
+    
+    genPkt.addSubPkt(0x0, 0, 0x180, 0xd, 10, b'\0'*10)
+    
+    gen_file_def_ap = gen_file_def + "_rw05"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+    
+
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 1
+    
+    
+    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
+        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
+        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
+        + '''_temp_time = _temp_time + 32'h3000;\n\n'''
+        + '''txBuf[3] = 8'h0f;\n'''
+        + '''txBuf[4] = 8'h00;\n'''
+        + '''txBuf[5] = 8'h0a;\n'''
+        + '''txBuf[6] = 8'h00;\n'''
+        + '''txBuf[7] = 8'h0a;\n'''
+        + '''txBuf[8] = 8'h00;\n'''
+        + '''txBuf[9] = 8'h0a;\n'''
+        + '''txBuf[10] = 8'h00;\n'''
+        + '''txBuf[11] = 8'h01;\n'''
+        + '''txBuf[12] = 8'h00;\n'''
+        + '''txBuf[19] =         (_temp_time & 8'hff);\n'''
+        + '''txBuf[20] = ( (_temp_time >> 8) & 8'hff);\n'''
+        + '''txBuf[21] = ((_temp_time >> 16) & 8'hff);\n'''
+        + '''txBuf[22] = ((_temp_time >> 24) & 8'hff);\n'''
+        + '''txBuf[23] = ((_temp_time >> 32) & 8'hff);\n'''
+        + '''txBuf[24] = 0;\n'''
+        + '''txBuf[25] = 0;\n'''
+        + '''txBuf[26] = 0;\n'''
+        + '''txBuf[27] = 8'h80;\n'''
+        + '''txBuf[28] = 8'h00;\n'''
+        + '''txBuf[29] = 8'h00;\n'''
+        + '''txBuf[30] = 8'h00;\n'''
+        + '''txBuf[31] = 8'h00;\n'''
+        + '''txBuf[32] = 8'h00;\n'''
+        + '''txBuf[33] = 8'h00;\n'''
+        + '''txBuf[34] = 8'h00;\n'''
+        + '''txBuf[35] = 8'h00;\n'''
+        + '''txBuf[36] = 8'h00;\n'''
+        + '''txBuf[37] = 8'h00;\n'''
+        + '''txBuf[38] = 8'h00;\n'''
+        + '''txBuf[39] = 8'h00;\n'''
+        + '''txBuf[40] = 8'h00;\n'''
+        + '''txBuf[41] = 8'h00;\n'''
+        + '''txBuf[42] = 8'h00;\n'''
+        + '''txBuf[43] = 8'h00;\n'''
+        + '''spi_trans( (16'h0120), (`SPI_WRITE), (40), (`IF_IDX(0)));\n'''
+                        )
+    
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xa, 12, b'\0'*12)
+    genPkt.addSubPkt(0, 0, 0x18, 0xe, 2, [0x1, 0x58])
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[1] = 0x0
+    data[2] = 0xa
+    data[3] = 0x0
+    data[4] = 0xa
+    data[5] = 0x0
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x80 #地址0x138, sync周期 4B
+    data[25] = 0x00 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0#sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
+    
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x01 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x02 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
+    genPkt.addSubPkt(0, 0, 0x18, 0xe, 2, [0x0, 0x58])
+    
+    gen_file_def_ap = gen_file_def + "_rw06"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+
+    #>>>>>>同步数据包
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xa, 12, [0, ] * 12)
+    #genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+    #genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+    
+    
+     
+
+    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))
+
+    sm_idx = 0
+    
+    gen_file_def_ap = gen_file_def + "_rw07"
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genCheckInsertTimeCode()
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       +genIFRwDataCode(2, 0x74, False, 4)
+                       +genIFRwDataCode(3, 0x74, False, 4)
+                       +genIFRwDataCode(4, 0x74, False, 4)
+                       
+                       +genTcEndFrameCode(gen_file_def)
+                       ) #+genDisableInsertTimeCode())
+
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
+
+    return gen_file_def