增加一个测试用例tc5,主站错误,并未报错.需要调试一下

tb/shinTest/testcase/base.py

@@ -478,14 +478,13 @@ def tc8():
     genPkt.clean()
     genPkt.setPktType(0)
 
-    reset_data = [0x01, 0x00, 0x66, 0x79]
     main_dev = [0x01, ]
     slave_dev = [0x02, ]
 
     genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        +genIFRwDataCode(0, 0x78, False, 4)
-                       +genIFRwDataCode(0, 0x40, True, 4, reset_data)
-                       +genIFRwDataCode(2, 0x40, True, 4, reset_data)
+                       +genIFRwDataCode(0, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                       +genIFRwDataCode(2, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
                        +"\n#5000\n"
                        +genIFRwDataCode(0, 0x09, True, 1, [0, ], False, iface=1)
                        +genIFRwDataCode(2, 0x09, True, 1, [0, ], False, iface=1)
@@ -1406,4 +1405,254 @@ def tc23():
 
     genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
 
+    return gen_file_def
+
+def tc24():
+    genPkt = GenPkt()
+
+    gen_file_def = "base_tc24"
+    sm_idx = 0
+    tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" 
+             "2设备单独指定周期。该同步数据之前没有补广播包。如果紧跟嗅探包而不是普通包之后，可能会影响同步。\\n"
+             "期望是无论前面发送得是什么包，都不会影响同步的效果。一段时间后，重新同步，期望不要打断sync\\n"
+             "信号的输出。需要在波形文件里查看具体的效果。"
+            )
+    
+
+    #-------------------------------------------------------------------------
+    genPkt.clean()
+    genPkt.setPktType(1)
+
+    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
+                        +genIFRwDataCode(2, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                        +genIFRwDataCode(3, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                        +genIFRwDataCode(4, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
+                        )
+    
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
+                       +genWriteTransPktCode(gen_file_def, sm_idx)
+                       +genTrgTransPktCode(gen_file_def, sm_idx)
+                       +genReadAckPktCode(gen_file_def, sm_idx)
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                      )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)
+
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 0
+
+    data = [0x3f, 0xff]
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xb, 2, data)
+
+    gen_file_def_ap = gen_file_def + "_rwFF"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+
+
+    #-------------------------------------------------------------------------
+    #>>>>>>设置同步信号的数据包
+    genPkt.clean()
+    genPkt.setPktType(0)
+    sm_idx = 0
+    
+    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
+        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
+        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
+        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
+    
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)
+
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 200, [0, ] * 200)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x80 #地址0x138, sync周期 4B
+    data[25] = 0x00 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0#sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
+    
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x01 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x02 #地址0x139
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)
+
+    data = [0,] * 100 #bytearray(b"\0" * 100)
+    data[0] = 0x0f  #地址0x120
+    data[2] = 0xa
+    data[4] = 0xa
+    data[6] = 0xa
+    data[8] = 0xa
+    
+    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
+    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
+    data[18] = '''(_temp_time >> 16) & 8'hff'''
+    data[19] = '''(_temp_time >> 24) & 8'hff'''
+    
+    data[24] = 0x00 #地址0x138, sync周期 4B
+    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
+    
+    data[28] = 0x0 #sync1偏移
+    data[29] = 0x0
+
+    data[36] = 0x0 #sync3偏移
+    data[37] = 0x0
+    
+    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
+    
+    gen_file_def_ap = gen_file_def + "_rw00"
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       #+genIFRwDataCode(2, 0x74, False, 4)
+                       #+genIFRwDataCode(3, 0x74, False, 4)
+                       #+genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       #+genIFRwDataCode(2, 0x74, False, 4)
+                       #+genIFRwDataCode(3, 0x74, False, 4)
+                       #+genIFRwDataCode(4, 0x74, False, 4)
+                       )
+    
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
+
+    #>>>>>>同步数据包
+    genPkt.clean()
+    genPkt.setPktType(0)
+
+    #subPkt参数：索引、索引类型、地址、命令、长度、数据
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, [0, ] * 12)
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
+    
+    
+     
+
+    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))
+
+    sm_idx = 0
+    
+    gen_file_def_ap = gen_file_def + "_rw02"
+
+    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
+                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
+                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
+                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
+                       +genCheckInsertTimeCode()
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       #+genIFRwDataCode(2, 0x74, False, 4)
+                       #+genIFRwDataCode(3, 0x74, False, 4)
+                       #+genIFRwDataCode(4, 0x74, False, 4)
+
+                       +genMessageCode("--清除中断")
+                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+                       #+genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
+
+                       +genMessageCode("--读取中断")
+                       +genIFRwDataCode(0, 0x74, False, 4)
+                       +genIFRwDataCode(1, 0x74, False, 4)
+                       #+genIFRwDataCode(2, 0x74, False, 4)
+                       #+genIFRwDataCode(3, 0x74, False, 4)
+                       #+genIFRwDataCode(4, 0x74, False, 4)
+                       +genTcEndFrameCode(gen_file_def)) #+genDisableInsertTimeCode())
+
+
+    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
     return gen_file_def