eb001/tb/shinTest/testcase/sync.py

from pyutils import *


def tc1():
    genPkt = GenPkt()

    gen_file_def = "sync_tc01"
    sm_idx = 0
    tc_des = "发送时钟信息，完成后，从站的系统时间与主站时间完全同步。主站发送\\n" \
           + "自己的时钟和系统延迟，从站利用该信息进行校准自己的时钟。需要在波形软件里确认。\\n" \
           + "仅看通讯数据无法确定系统功能正常。"
    #-------------------------------------------------------------------------
    #>>>>>>广播包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0])
    
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        )

    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       +genCheckInsertTimeCode()

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       ) 

    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)

    #-------------------------------------------------------------------------
    #>>>>>>同步数据包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)
    
    
    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))

    sm_idx = 0
    gen_file_def_ap = gen_file_def + "_rw01"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +genCheckInsertTimeCode()
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genTcEndFrameCode(gen_file_def)) #+genDisableInsertTimeCode())


    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
    return gen_file_def


def tc2():
    genPkt = GenPkt()

    gen_file_def = "sync_tc02"
    sm_idx = 0
    tc_des = "配置Sync信号为电平触发，设置SYNC的同步周期，SYNC1、SYNC3的偏移。\\n" \
           + "SYNC触发后，需要手动清除SYNC信号。"
    

    #-------------------------------------------------------------------------
    #>>>>>>广播包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0])
    
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        )

    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       +genCheckInsertTimeCode()

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       ) 

    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)

    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包，在波形中确认定时的有效性
    genPkt.clean()
    genPkt.setPktType(0)

    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h2000;\n\n''')

    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0xff  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x10 #地址0x139
    
    #28, 29, 30, 31
    data[28] = 0x81 #sync1偏移
    data[29] = 0x0
    

    #32,33,34,35 #sync2偏移

    #36,37,38,39
    data[36] = 0x20 #sync3偏移
    data[37] = 0x00
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)

    sm_idx = 0
    gen_file_def_ap = gen_file_def + "_rw01"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +"\n#1000000\n"
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genTcEndFrameCode(gen_file_def)
                       )


    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
    return gen_file_def

    

def tc3():
    genPkt = GenPkt()

    gen_file_def = "sync_tc03"
    sm_idx = 0
    tc_des = "SYNC信号采用脉冲触发，4个设备，3个周期；先用广播包发送公共周期；然后3，4设备单独指定周期。\\n" \
           + "需要在波形文件里查看。"
    

    #-------------------------------------------------------------------------
    #>>>>>>广播包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0])
    
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        )

    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       +genCheckInsertTimeCode()

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       ) 

    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)

    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包
    genPkt.clean()
    genPkt.setPktType(0)

    sm_idx = 3
    
    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa, 1, 1)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h4000;\n\n''')
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)
    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    gen_file_def_ap = gen_file_def + "_rw01"
    
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +"#2000000\n"
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genTcEndFrameCode(gen_file_def))
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
    return gen_file_def



def tc4():
    genPkt = GenPkt()

    gen_file_def = "sync_tc04"
    sm_idx = 0
    tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" 
             "2设备单独指定周期。一段时间后，重新同步，期望不要打断sync信号的输出。需要在波形文件里查看具体的效果。"
            )
    

    #-------------------------------------------------------------------------
    #>>>>>>广播包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0])
    
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        )

    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       +genCheckInsertTimeCode()

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       ) 

    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)

    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包
    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 3
    
    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0#sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
    
    gen_file_def_ap = gen_file_def + "_rw01"
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)

    #>>>>>>同步数据包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, [0, ] * 12)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    
    
     

    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))

    sm_idx = 0
    
    gen_file_def_ap = gen_file_def + "_rw02"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +genCheckInsertTimeCode()
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genTcEndFrameCode(gen_file_def)) #+genDisableInsertTimeCode())


    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
    return gen_file_def


def tc5():
    genPkt = GenPkt()

    gen_file_def = "sync_tc05"
    sm_idx = 0
    tc_des = "先同步，输出sync信号；然后RESET，仅复位4号设备，链路和网络被破坏；发送广播包只能到1/2/3, 4收不到。\\n" \
           + "然后检查同步信号是否能正常工作。然后对设备4进行必要的恢复工作。通过嗅探包、设置顺序地址命令等重新建立网络。"
    

    #-------------------------------------------------------------------------
    #>>>>>>广播包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 2, [0, 0])
    
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        )

    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       +genCheckInsertTimeCode()

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       ) 

    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1)

    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包
    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 3
    
    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0#sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
    

    gen_file_def_ap = gen_file_def + "_rw00"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)


    #>>>>>>设置顺序地址
    genPkt.clean()
    genPkt.setPktType(0)



    reset_data = [0x01, 0x00, 0x66, 0x79]

    genPkt.addBeforeExc("#50000\n"
                       +genIFRwDataCode(0, 0x78, False, 4)
                       +genIFRwDataCode(4, 0x40, True, 4, reset_data)
                       +"\n#5000\n"
                       #+genIFRwDataCode(0, 0x09, True, 1, [0, ], False, iface=1)
                       #+genIFRwDataCode(2, 0x09, True, 1, [0, ], False, iface=1)
                       #+genIFRwDataCode(0, 0x74, False, 4)
                       #+genIFRwDataCode(2, 0x74, False, 4)
                       #+genIFRwDataCode(0, 0x40, False, 4)
                       #+genIFRwDataCode(2, 0x40, False, 4)
                       #+genIFRwDataCode(0, 0x00, True, 1, [0x01, ])
                       #+genIFRwDataCode(2, 0x00, True, 1, [0x02, ])
                       )


    data = [0,] * 128


    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 128, data)

    
    sm_idx = 0
    gen_file_def_ap = gen_file_def + "_rw01"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       
                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                      )
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)

    #------------------------------------------------------------------------------
    genPkt.clean()
    genPkt.setPktType(1)

    genPkt.addBeforeExc(genIFRwDataCode(1, 0xc0, False, 4)
                       +genIFRwDataCode(2, 0xc0, False, 4)
                       +genIFRwDataCode(3, 0xc0, False, 4)

                       +genIFRwDataCode(4, 0x09, True, 1, [0, ], False, iface=1)
                       +genIFRwDataCode(4, 0x00, True, 1, [0x2, ])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       
                       +genIFRwDataCode(4, 0xc0, False, 4)
                       )
    
    gen_file_def_ap = gen_file_def + "_rw02"
    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       #+genTcEndFrameCode(gen_file_def)
                       +genIFRwDataCode(1, 0xc0, False, 4)
                       +genIFRwDataCode(2, 0xc0, False, 4)
                       +genIFRwDataCode(3, 0xc0, False, 4)
                       +genIFRwDataCode(4, 0xc0, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)

    #------------------------------------------------------------------------------
    genPkt.clean()
    genPkt.setPktType(0)
    
    gen_file_def_ap = gen_file_def + "_rw03"
    sm_idx = 0

    data = [0x3f, 0xff]
    genPkt.addSubPkt(0x0, 0, 0x0, 0xb, 2, data)

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       #+genTcEndFrameCode(gen_file_def)
                       +genIFRwDataCode(1, 0xc0, False, 4)
                       +genIFRwDataCode(2, 0xc0, False, 4)
                       +genIFRwDataCode(3, 0xc0, False, 4)
                       +genIFRwDataCode(4, 0xc0, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)


    #------------------------------------------------------------------------------
    genPkt.clean()
    genPkt.setPktType(1)

    genPkt.addBeforeExc(genIFRwDataCode(1, 0xc0, False, 4)
                       +genIFRwDataCode(2, 0xc0, False, 4)
                       +genIFRwDataCode(3, 0xc0, False, 4)
                       +genIFRwDataCode(4, 0xc0, False, 4)
                       )
    
    gen_file_def_ap = gen_file_def + "_rw04"
    sm_idx = 0

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +genIFRwDataCode(1, 0xc0, False, 4)
                       +genIFRwDataCode(2, 0xc0, False, 4)
                       +genIFRwDataCode(3, 0xc0, False, 4)
                       +genIFRwDataCode(4, 0xc0, False, 4)
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genTcEndFrameCode(gen_file_def)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)


    return gen_file_def


def tc6():
    genPkt = GenPkt()

    gen_file_def = "sync_tc06"
    sm_idx = 0
    tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" 
             "2设备单独指定周期。该同步数据之前没有补广播包。如果紧跟嗅探包而不是普通包之后，可能会影响同步。\\n"
             "期望是无论前面发送得是什么包，都不会影响同步的效果。一段时间后，重新同步，期望不要打断sync\\n"
             "信号的输出。需要在波形文件里查看具体的效果。"
            )


    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包
    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 3
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        +genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0#sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
    
    #gen_file_def_ap = gen_file_def + "_rw01"
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)

    #>>>>>>同步数据包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, [0, ] * 12)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    
    
     

    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))

    sm_idx = 0
    
    gen_file_def_ap = gen_file_def + "_rw02"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +genCheckInsertTimeCode()
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       #+"#5000000"
                       #+genIFRwDataCode(0, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
                       +genTcEndFrameCode(gen_file_def)) #+genDisableInsertTimeCode())


    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
    return gen_file_def


def tc7():
    genPkt = GenPkt()

    gen_file_def = "sync_tc07"
    sm_idx = 0
    tc_des = ("同步后，SYNC信号采用脉冲触发，4个设备，4个周期；先用广播包发送公共周期；然后3，4，\\n" 
             "2设备单独指定周期。该同步数据之前没有补广播包。如果紧跟嗅探包而不是普通包之后，可能会影响同步。\\n"
             "期望是无论前面发送得是什么包，都不会影响同步的效果。一段时间后，重新同步，期望不要打断sync\\n"
             "信号的输出。需要在波形文件里查看具体的效果。"
            )


    #-------------------------------------------------------------------------
    #>>>>>>设置同步信号的数据包
    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 3
    
    genPkt.addBeforeExc(genTcStartFrameCode(gen_file_def, tc_des)
                        +genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h3000;\n\n''')
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0#sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
    
    #gen_file_def_ap = gen_file_def + "_rw01"
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def, sm_idx)
                       +genWriteTransPktCode(gen_file_def, sm_idx)
                       +genTrgTransPktCode(gen_file_def, sm_idx)
                       +genReadAckPktCode(gen_file_def, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1)

    #>>>>>>同步数据包
    genPkt.clean()
    genPkt.setPktType(0)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, [0, ] * 12)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    genPkt.addSubPkt(0x0, 0, 0x0, 0xd, 10, [0, ] * 10)
    
    
     

    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa))# + 18 + 18))

    sm_idx = 0
    
    gen_file_def_ap = gen_file_def + "_rw02"

    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       +genCheckInsertTimeCode()
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       
                       +"#5000000"
                       +genIFRwDataCode(0, 0x40, True, 4, [0x01, 0x00, 0x66, 0x79])
                       ) #+genDisableInsertTimeCode())


    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def, ), 1, True, gen_file_def_ap)
    
    
    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 1
    
    genPkt.addBeforeExc("\n#5000\n"
                       +genIFRwDataCode(0, 0x09, True, 1, [0, ], False, iface=1)
                       
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(0, 0x40, False, 4)
                       +genIFRwDataCode(0, 0x00, True, 1, [0x1, ])
                        )
    
    genPkt.addSubPkt(0x0, 0, 0x180, 0xd, 10, b'\0'*10)
    
    gen_file_def_ap = gen_file_def + "_rw03"
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)
    

    genPkt.clean()
    genPkt.setPktType(0)
    sm_idx = 1
    
    
    genPkt.addBeforeExc(genEnableInsertTimeCode(0xa)
        + '''spi_trans( (16'h0100), (`SPI_READ), (8), (`IF_IDX(0)));\n'''
        + '''_temp_time = rxBuf[3] + (rxBuf[4] << 8) + (rxBuf[5] << 16) + (rxBuf[6] << 24) + (rxBuf[7] << 32) + (rxBuf[8] << 40) + (rxBuf[9] << 48) + (rxBuf[10] << 56);\n'''
        + '''_temp_time = _temp_time + 32'h3000;\n\n'''
        + '''txBuf[3] = 8'h0f;\n'''
        + '''txBuf[4] = 8'h00;\n'''
        + '''txBuf[5] = 8'h0a;\n'''
        + '''txBuf[6] = 8'h00;\n'''
        + '''txBuf[7] = 8'h0a;\n'''
        + '''txBuf[8] = 8'h00;\n'''
        + '''txBuf[9] = 8'h0a;\n'''
        + '''txBuf[10] = 8'h00;\n'''
        + '''txBuf[19] =         (_temp_time & 8'hff);\n'''
        + '''txBuf[20] = ( (_temp_time >> 8) & 8'hff);\n'''
        + '''txBuf[21] = ((_temp_time >> 16) & 8'hff);\n'''
        + '''txBuf[22] = ((_temp_time >> 24) & 8'hff);\n'''
        + '''txBuf[23] = ((_temp_time >> 32) & 8'hff);\n'''
        + '''txBuf[24] = 0;\n'''
        + '''txBuf[25] = 0;\n'''
        + '''txBuf[26] = 0;\n'''
        + '''txBuf[27] = 8'h80;\n'''
        + '''txBuf[28] = 8'h00;\n'''
        + '''txBuf[29] = 8'h00;\n'''
        + '''txBuf[30] = 8'h00;\n'''
        + '''txBuf[31] = 8'h00;\n'''
        + '''txBuf[32] = 8'h00;\n'''
        + '''txBuf[33] = 8'h00;\n'''
        + '''txBuf[34] = 8'h00;\n'''
        + '''txBuf[35] = 8'h00;\n'''
        + '''txBuf[36] = 8'h00;\n'''
        + '''txBuf[37] = 8'h00;\n'''
        + '''txBuf[38] = 8'h00;\n'''
        + '''txBuf[39] = 8'h00;\n'''
        + '''spi_trans( (16'h0120), (`SPI_WRITE), (40), (`IF_IDX(0)));\n'''
                        )
    
    genPkt.addSubPkt(0x0, 0, 0x0, 0xc, 12, b'\0'*12)

    #subPkt参数：索引、索引类型、地址、命令、长度、数据
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[1] = 0x0
    data[2] = 0xa
    data[3] = 0x0
    data[4] = 0xa
    data[5] = 0x0
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x80 #地址0x138, sync周期 4B
    data[25] = 0x00 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0#sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(0, 0, 0x120, 0xe, 0x28, data)
    
    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x01 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(3, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x02 #地址0x139
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(4, 0, 0x120, 0x1, 0x28, data)

    data = [0,] * 100 #bytearray(b"\0" * 100)
    data[0] = 0x0f  #地址0x120
    data[2] = 0xa
    data[4] = 0xa
    data[6] = 0xa
    data[8] = 0xa
    
    data[16] = '''(_temp_time & 8'hff)''' #地址0x130, sync同步点
    data[17] = '''(_temp_time >> 8) & 8'hff''' #地址0x131
    data[18] = '''(_temp_time >> 16) & 8'hff'''
    data[19] = '''(_temp_time >> 24) & 8'hff'''
    
    data[24] = 0x00 #地址0x138, sync周期 4B
    data[25] = 0x04 #地址0x139genPkt.addBeforeExc(
    
    data[28] = 0x0 #sync1偏移
    data[29] = 0x0

    data[36] = 0x0 #sync3偏移
    data[37] = 0x0
    
    genPkt.addSubPkt(2, 0, 0x120, 0x1, 0x28, data)
    
    gen_file_def_ap = gen_file_def + "_rw04"
    genPkt.addAfterExc(genWriteTransLenCode(gen_file_def_ap, sm_idx)
                       +genWriteTransPktCode(gen_file_def_ap, sm_idx)
                       +genTrgTransPktCode(gen_file_def_ap, sm_idx)
                       +genReadAckPktCode(gen_file_def_ap, sm_idx)
                       
                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)

                       +genMessageCode("--清除中断")
                       +genIFRwDataCode(0, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(1, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(2, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(3, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])
                       +genIFRwDataCode(4, 0x78, True, 4, [0xff, 0xff, 0xff, 0xff])

                       +genMessageCode("--读取中断")
                       +genIFRwDataCode(0, 0x74, False, 4)
                       +genIFRwDataCode(1, 0x74, False, 4)
                       +genIFRwDataCode(2, 0x74, False, 4)
                       +genIFRwDataCode(3, 0x74, False, 4)
                       +genIFRwDataCode(4, 0x74, False, 4)
                       +genTcEndFrameCode(gen_file_def)
                       )
    
    genPkt.gen("./generated/shin/%s.vh"%(gen_file_def,), 1, True, gen_file_def_ap)

    
    return gen_file_def